Printable View
Hello,
I am working on my CCNA. I have two cisco routers, and want to hook them up to my network. I have already configured them to use the dte cables to study with. However I would like to be able to connect my cable Modem to one end and then have the other router connected to my network.
Where I am getting lost is configing the gateway and the DHCP Setting for the router to be able to access the internet...mY routers are as follows..
2501 and 2522
If you need any other info let me know..
Thnx
So how are they set up: phone jack - cable modem - router - router - network?
And can't you access them by typing in their ip addresses and configuring them through an http windows?
Here is the setup..
Cable modem connected to a Cisco 2522..Then The 2522 is connected via a serial link to a Cisco 2501...From there I have the 2501 plugged into my 3COM hub with the rest of my network...
I am still learning so the config as been changed many times..I recently tried configing it with Ciscos configmaker...This is what I have right now...
Cisco 2522 connection to the internet
Current configuration:
!
version 12.0
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname Cisco2522
!
enable password 7 021601490D030C35
!
!
!
!
!
ip subnet-zero
no ip domain-lookup
!
isdn voice-call-failure 0
!
!
!
interface Ethernet0
description connected to Internet
ip address 192.168.199.3 255.255.255.0
no ip directed-broadcast
ip nat outside
!
interface Serial0
no ip address
no ip directed-broadcast
encapsulation frame-relay
no ip mroute-cache
frame-relay lmi-type ansi
!
interface Serial0.1 point-to-point
description connected to Cisco2501
ip address 192.168.0.2 255.255.255.252
no ip directed-broadcast
ip nat inside
frame-relay interface-dlci 30
!
interface Serial1
no ip address
no ip directed-broadcast
shutdown
!
interface Serial2
no ip address
no ip directed-broadcast
shutdown
!
interface Serial3
no ip address
no ip directed-broadcast
shutdown
!
interface Serial4
no ip address
no ip directed-broadcast
shutdown
!
interface Serial5
no ip address
no ip directed-broadcast
shutdown
!
interface Serial6
no ip address
no ip directed-broadcast
shutdown
!
interface Serial7
no ip address
no ip directed-broadcast
shutdown
!
interface Serial8
no ip address
no ip directed-broadcast
shutdo
!
interface Serial9
no ip address
no ip directed-broadcast
shutdown
!
interface BRI0
no ip address
no ip directed-broadcast
shutdown
isdn guard-timer 0 on-expiry accept
!
router rip
version 2
passive-interface Ethernet0
network 192.168.0.0
no auto-summary
!
ip nat inside source list 1 interface Ethernet0 overload
ip classless
ip route 0.0.0.0 0.0.0.0 Ethernet0
no ip http server
!
access-list 1 permit 192.168.0.0 0.0.0.3
access-list 1 permit 192.168.100.0 0.0.0.255
snmp-server engineID local 0000000902000050547FC11E
snmp-server community public RO
snmp-server location Internet
!
line con 0
exec-timeout 0 0
password 7 110E1D06
login
transport input none
line aux 0
line vty 0 4
password 7 00031705
login
!
end
Cisco 2501 connection to local network
Current configuration:
!
version 11.3
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname Cisco2501
!
enable password 7 00141614025E0812
!
ip subnet-zero
no ip domain-lookup
!
!
interface Ethernet0
description connected to EthernetLAN
ip address 192.168.100.1 255.255.255.0
!
interface Serial0
no ip address
encapsulation frame-relay
no ip mroute-cache
frame-relay lmi-type ansi
!
interface Serial0.1 point-to-point
description connected to Cisco2522
ip address 192.168.0.1 255.255.255.252
frame-relay interface-dlci 25
!
interface Serial1
no ip address
shutdown
!
router rip
version 2
network 192.168.0.0
network 192.168.100.0
no auto-summary
!
ip classless
snmp-server community public RO
snmp-server location Network
!
line con 0
exec-timeout 0 0
password 7 03035F08
login
line aux 0
line vty 0 4
password 7 050C020C
login
!
end
Thanks for your help..