post dailup screen for adsl

i want to know how to bring the "Post dial-up screen" or equivalent if someone is using a broadband connection that uses an ADSL modem, utilizes the "PPPoE" protocol and hence does not need any number to connect to isp and only username and password is required.

if someone is using a dailup connection using a dial-up modem then the post dailup screen can be bought by enableing the "show terminal window" option in modem properties but what in this case?

my main aim is to go the isp router promt where i can manually input userId and password

I am using HUAWEI smartAx MT841 adsl modem

an interesting thing this modem when turned on assigns 192.168.1.1 as the default gateway address (its own address as it has an in built switch)

when i log into this using telnet (port 23) the default id and pass supplied by the manufacturer and type ? i get this



-->
802.1x 802.1x port based authentication
WLAN Configure Wireless Module
agent Get a file from a remote host
atmloopback commands to configure remote ATM loopback
autoprov
bridge Configure layer 2 bridge
console Console access
ddns
dhcpclient DHCP client configuration commands
dhcpserver DHCP server configuration commands
diagnosticTest
dnsclient DNS client configuration commands
dnsrelay DNS relay configuration
ethernet Commands to configure ethernet transports
firewall Firewall configuration commands
help Top level CLI help
igmp
imdebug Directly access the information model
ip Configure IP router
logger Log to a remote host using syslog
nat NAT configuration commands
port Physical port configuration commands
pppoa PPP over ATM configuration
pppoe
radclient RADIUS Client Configuration commands
rfc1483 Commands to configure RFC1483 transports
security Security configuration commands not specific to NAT or firewall
sntpclient
source Read a file of commands
system System administration commands
tftpc TFTP client commands
transports Transport configuration commands
user User commands
webserver Webserver configuration commands
wpa Configure WPA (Wireless Protected Access)
zipb Configure Dynamic ZIPB mode
-->
802.1x 802.1x port based authentication
WLAN Configure Wireless Module
agent Get a file from a remote host
atmloopback commands to configure remote ATM loopback
autoprov
bridge Configure layer 2 bridge
console Console access
ddns
dhcpclient DHCP client configuration commands
dhcpserver DHCP server configuration commands
diagnosticTest
dnsclient DNS client configuration commands
dnsrelay DNS relay configuration
ethernet Commands to configure ethernet transports
firewall Firewall configuration commands
help Top level CLI help
igmp
imdebug Directly access the information model
ip Configure IP router
logger Log to a remote host using syslog
nat NAT configuration commands
port Physical port configuration commands
pppoa PPP over ATM configuration
pppoe
radclient RADIUS Client Configuration commands
rfc1483 Commands to configure RFC1483 transports
security Security configuration commands not specific to NAT or firewall
sntpclient
source Read a file of commands
system System administration commands
tftpc TFTP client commands
transports Transport configuration commands
user User commands
webserver Webserver configuration commands
wpa Configure WPA (Wireless Protected Access)
zipb Configure Dynamic ZIPB mode
-->

but after this point i am unable to dial or log into the isp .plz help

thnx

Quote:

---

utilizes the "PPPoE" protocol and hence does not need any number to connect to isp

---

you will still require a tel # for your system to 'dial'
the number is on the CD you got with hardware

Quote:

---

an interesting thing this modem when turned on assigns 192.168.1.1 as the default gateway address

---

it's a router ..........
might be called a modem, but it has a box full of tricks of its own

I think that you have a point there Foxy~.

I would expect the "account setup" to be on a CD supplied by the ISP, otherwise how can the connection be authenticated account wise?

Well, that's the way BT work.

If I click on the BT icon on my desktop, it brings up the user and password entry menu for my ADSL account.

:)

plz i would like to make every nerd aware that an adsl is a kind of N-ISDN type conection which does not require any telephone no only uid and pass

tele no is needed in case of a dil up 56 kbps modem

DOES ANYONE REQUIRE ANY TELEPHONE NUMBER TO LOG INTO AN EHTERNET NETWORK?...MAY BE ON MON

aoboyz,

It all depends how your ADSL provider works. I would expect them to supply a setup disk, and have a copy of the setup program on their support site.

I don't know how things are where you live, but over here you DO need a telephone number. Your telephone number, as you can only access the account from your telephone line. This is one of the things that the ISP installation disk sets up.

My 56.6 dial-up is different, as I can access my account from anywhere. It is "pay as you go" so the more I use it the more money the ISP makes, so they don't care.

I suggest you contact your ADSL provider for details of your local service and how to set it up. I doubt if anyone here can help you, as there are so many possible variations.

aoboyz,

I work as tech support for an Dialup & xDSL ISP. I also wanted to confirm nihil's statement that the DSL line uses a phone number 99% of the time.

A small amount of our DSL customers access DSL via Unbundled Loop (UBL). Instead of having the DSL bound to a telephone number, an account may be bound to a UBL which is a strange looking number with 3 octets (xx.xxxx.xxxx something like that) unlike an ip or phone number. The chances your DSL uses UBL instead of a phone # is more likely only if your service was purchased a decade ago.

Most of the time, DSL accounts require user/pass authentication (PPPoE/PPPoA/UBL). WinXP/Vista & Mac OSX can do PPPoE authentication without any software from the ISP - it only needs a bridged DSL modem (though we sell some PPPoE modem/routers that don't require pc setup). PPPoA/UBL authenticate w/o any pc setup but our long-time DSL customers setup this way use expensive Cisco 677 modem/router dinosaurs. Luckily, expensive and less effiencient PPPoA/UBL is being phased out in favor of PPPoE.

New DSL service be installed on the home phone number and the analog voice/digital DSL will play nice together on the same line. The old ways of DSL use to require getting a dedicated DSL line installed - some of our customers are setup with a dedicated line from the old days and it's more expensive than current share-the-line setup.

I hope my insight on DSL will help you better understand the technology that connects you to the internet.