i dont quite no how to overclock my pc or wether i should
Printable View
i dont quite no how to overclock my pc or wether i should
http://www.google.com/search?hl=en&q...our+PC&spell=1
use google :)
and no i wouldn't recommend it.
Short answer : NO
If you don't know how to, OR whether you should : DON'T.
You can damage your PC by running it at speeds that the manufacturer did not envisage when they built it, and they will therefore not consider any warranty claims ............
Overclocking is done to produce more byte per buck :cool:
The basics behind it are to adjust the voltages into the FSB / RAM, and to change the variables in the BIOS to find the sweet spot, that gives continued stability, PLUS an additional %age increase in throughput..............
If the above reads like twaddle, then you should DEFINATELY NOT overclock :)
Do some research.
For your next post [?] give more [some] details.
ie - with regard to the above :
it WOULD have been more helpful to have added :
PC specs
Mo/Bo name - No - age
CPU - speed - type - socket
RAM - amount - type - make
your own level of 'expertise'
reasons for the request
This would have given us a better picture of you, and would have put more people into a frame of mind to help.
Better luck next time.
And welcome to AO
foxy report = D+ / must try harder :)
http://www.overclockers.com
I don't recommend it either, you can usually get much better performance improvements by increasing RAM and so on.
:)
Actually, this is something I've been interested in learning too, but haven't asked yet, because of my lack of having a specific question just yet. :)
But now that's it brought up...
Where do you start with learning this? I suppose with learning to understand how voltages are managed in hardware? And is there a way to learn this without inevitably ruining your first few CPUs you try this on? It sounds nearly impossible to learn without screwing something up the first time or two...
The Book of Overclocking: Tweak Your PC to Unleash Its Power
http://www.amazon.com/exec/obidos/tg...books&n=507846
Yes, the overclocking world has gone corporate.
There was another one called "the complete guide to overclocking" (or something similar)which had examples of how far you can overclock processors for a ton of processors.
Hi,
You will find that most modern MoBos and videocards come with overclocking software.
The secret is to start slowly and work your way up, checking stability as you go. Remember that you will have to beef up the cooling.
Personally I don't think that it is a very good idea, as it promotes instability and reduces component life.
;)
You could always do a basic course such as Comp TIA A+, to give you a grounding in hardware, then grab an old dog of a box, and make it FLYYYYY :)Quote:
But now that's it brought up...
Where do you start with learning this?
Reading is probably going to be the method of choice, but I DO like to study in a structured setting.
So how big an effect do you get from overclocking? Is it really noticable, or rather insignificant?
I do have some QUITE old CPUs lying around that aren't of that much use...perhaps I could breathe new life into them?
<edit> And yes, I indeed find myself doing a LOT of reading nowadays. :D
These days I guess you are looking at around 5%?
Boosting RAM from 128Mb to 512Mb could give you as much as 35%, going from WinME to XP (on the right box) could be 20%
I guess it all depends on what you do, but I don't think that processor speeds are as important these days, certainly for ordinary desktops.
I've wondered the same thing. My two best machines run P3's with somewhere around a gig of MHz each, so they are certainly not the latest and greatest in today's world of P4s. But with 512mb of RAM they can fly with the best of 'em.Quote:
I don't think that processor speeds are as important these days, certainly for ordinary desktops.
This is the way to overclock.
5 GHz Project: CPU Cooling With Liquid Nitrogen
http://www20.tomshardware.com/cpu/20031230/index.html
They have a video for download that is pretty cool as well. (no pun intended)
Video Link
Conclusion: Overclock well, and keep your box in a refrigerator.
Got it. :)
CXGJarrod
Has hit the nail on the head, there is a sort of overclockers' cult, where they do that sort of thing out of scientific/academic interest, or just for the hell of it:).
Another method of cooling to check out is the Peltier.
cheers for the advice peeps
hardocp.com also has a lot of good OCing stuff...
OCing your first time doesn't have to end in disaster, Angelic. Just work your way up slowly increasing the voltages on your CPU. The hardest part is unlocking the CPU multiplier. It's easy to keep from messing stuff up if you pay attention to your CPU temp.
For how much performance you will get, it really depends on the CPU version and the CPU you got from the manufacturer itself, as ever CPU is a little different. My 2800+ may be able to gain 300Mhz with no real heat problems, whereas yours, with the same core and about the same creation date, may only be able to get 150Mhz.