-
December 27th, 2001, 07:18 PM
#1
IRC operator commands
See http://www.antionline.com/showthread...hreadid=137369 for basic commands
See http://www.antionline.com/showthread...hreadid=137507 for useful advanced commands.
See http://www.antionline.com/showthread...hreadid=137514 for useless advanced commands.
This is the Operator commands. It also contains the services commands.
OPER
Attempts to give a user IRC Operator status.
Syntax: OPER <uid> <password>
WALLOPS
Sends a "Message" to all those with the umode +w.
Syntax: WALLOPS <message>
GLOBOPS
Sends a global "Message" to all IRCops.
Syntax: GLOBOPS <message>
CHATOPS Command
IRCops with the +c flag enabled will be able to send/receive CHATOPS messages.
Syntax: CHATOPS <message>
LOCOPS Command
Similar to GLOBOPS, except only received by those IRCops local to your server.
Syntax: LOCOPS <message>
ADCHAT Command
This command sends to all Admins online. Only for Admins. This is a ChatOps style command.
Syntax: ADCHAT <text>
NACHAT Command
This command sends to all NetAdmins & TechAdmins online. Only for Net/Techadmins. This is a ChatOps style command.
Syntax: NACHAT <text>
TECHAT Command
This command sends to all TechAdmins online. Only for Net/Techadmins. This is a ChatOps style command.
Syntax: TECHAT <text>
KILL Command
Forcefully Disconnects a user from an IRC Server.
Syntax: KILL <user> <reason>
KLINE Command
"Bans" a hostmask from connection to the IRC server.
Syntax: KLINE <hostmask> <reason>
UNKLINE Command
Removes a k:line from the server.
Syntax: UNKLINE <hostmask>
ZLINE Command
Disables all access to the IRC server from a specified IP.
Syntax: ZLINE <ip> :reason
UNZLINE Command
Removes a currently active z:Line.
Syntax: UNZLINE <ip>
GLINE command
This command provides timed G:Lines. If you match a G:Line you cannot connect to ANY server on the IRC network. A time of 0 in the GLINE makes it permanent (Never Expires).
Syntax: GLINE <user@host mask> <seconds to be banned> :<reason> (Adds a G:line for user@host)
GLINE -<user@host mask> (Removes a G:line for user@host)
SHUN Command
Prevents a user from executing ANY command except ADMIN and respond to Server Pings. This effectively prevents them from doing anything on the server.
A time of 0 on the SHUN makes it permanent (Never Expires).
Syntax : SHUN <nickname> <time> :<Reason> (Shun the nickname for time)
SHUN +<user@host> <time> :<Reason> (Shun the user@host for time)
SHUN -<user@host> (Removes the SHUN for user@host)
SHUN (View the current SHUN list)
AKILL Command (Use Services AKILL Instead)
Adds an Autokill for the specific host mask. Services Admin & above only ..
Syntax : AKILL <user@host> :<Reason>
RAKILL Command (Use Services AKILL Instead)
Removes an AKILL set by an IRC Operator or Services. Services Admin & above only
Syntax : RAKILL <user@host>
REHASH Command
Prompts the server to reread the configuration files. Only TechAdmins and NetAdmins may specify a server name.
Syntax: REHASH <servername> -<flags>
REHASH -<flags>
RESTART Command
Kills and restarts the IRC daemon, disconnecting all users currently on that server.
Syntax: RESTART
DIE Command
Kills the IRC daemon, disconnecting all users currently on the current server.
Syntax: DIE
LAG Command
This command is like a Sonar or Traceroute for IRC servers.
Syntax: LAG <servername>
SETHOST Command
This command is so you can change your Virtual host to everything you want to.
Syntax: SETHOST <new hostname>
SETIDENT Command
With this command you can change your Ident (username).
Syntax: SETIDENT <new ident>
CHGHOST Command
Changes the hostname of a user currently on the IRC network.
Syntax: CHGHOST <nick> <host>
CHGIDENT Command
Changes the ident of a user currently on the IRC network.
Syntax: CHGIDENT <nick> <ident>
CHGNAME Command
Changes the "Real Name" of a user currently on the IRC network.
Syntax: CHGNAME <nick> <name>
SQUIT Command
Disconnects an IRC Server from the network.
Syntax: SQUIT <server>
CONNECT Command
Links another IRC server to the one you are currently on.
Syntax: CONNECT <server>
CONNECT <hub> <port> <leaf>
DCCDENY Command
Adds a DCC Deny for that filename mask.
Syntax : DCCDENY <filename mask> <reason>
UNDCCDENY Command
If the EXACT file you type is found it is removed, else it uses wildcards to search
Syntax : UNDCCDENY <filename mask>
SAJOIN Command
Forces a user to join channel(s). Can only be used by a Services Admin.
Syntax: SAJOIN <nick> <channel>
SAPART Command
Forces a user to leave channel(s). Can only be used by a Services Admin.
Syntax: SAPART <nick> <channel>
SAMODE Command
Allows a Services Administrator to change the mode on a channel.
Syntax: SAMODE <channel> <mode>
RPING Command
This will calculate the milliseconds (Lag) between servers
Syntax: RPING <servermask>
TRACE Command
TRACE is useful to know what servers are connected to what.
Syntax: TRACE <servername>
OPERMOTD Command
Shows the IRCd Operator MOTD.
Syntax: OPERMOTD
ADDMOTD Command
This will add the text you specify to the MOTD. Server Admin & Co-Admin only
Syntax: ADDMOTD :text
ADDOMOTD Command
This will add the text you specify to the Operator MOTD. Server Admin & Co-Admin only
Syntax: ADDOMOTD :text
SDESC Command
With this command you can change your Server Info Line. This is a Server Admin/Co Admin only command
Syntax: SDESC <New description>
ADDLINE Command
This command can be used to add lines to the ircd.conf file Only for Server Admins
Syntax: ADDLINE <line>
MKPASSWD Command
This command will encrypt the string it has been given
So u can add it directly to the ircd.conf if you use Encrypted passwords.
Syntax : MKPASSWD <string to be encrypted>
TSCTL Command
This is a highly advanced command
Syntax: TSCTL OFFSET +|- <time> (Adjust internal IRC clock)
TSCTL TIME (Will give TS report)
TSCTL ALLTIME (Shows the TS report of all Servers)
TSCTL SVSTIME <timestamp> (Sets the Time on all servers)
HTM Command
Switches the server In & Out of High Traffic Mode. See flags addendum for options.
Syntax: HTM [option]
*** Services Commands (U:Lined Server)***
Must be sent through an U:Lined server.
SVSNICK Command
Changes the nickname of the user in question.
Syntax: SVSNICK <nickname> <new nickname> <timestamp>
SVSMODE Command
Changes the mode of the user in question.
Syntax: SVSMODE <nickname> <usermode>
SVSKILL Command
Forcefully disconnects a user from the network.
Syntax: SVSKILL <user> :<reason>
SVSNOOP Command
Enabled or disables whether Global IRCop functions exist on the server in question or not.
Syntax: SVSNOOP <server> <+/->
SVSJOIN Command
Forces a user to join a channel.
Syntax: SVSJOIN <nick> <channel>[,<channel2>..]
SVSPART Command
Forces a user to leave a channel.
Syntax: SVSPART <nick> <channel>[,<channel2>..]
SVSO Command
Gives nick Operflags like the ones in O:lines, remember to set SVSMODE +o and alike.
Syntax: SVSO <nick> <+operflags> (Adds the Operflags)
SVSO <nick> - (Removes all O:Line flags)
SWHOIS Command
Changes the WHOIS message of the Nickname.
Syntax: SWHOIS <nick> :<message> (Sets the SWHOIS)
SWHOIS <nick> : (Resets the SWHOIS)
SQLINE Command
Bans a Nickname or a certain Nickname mask from the Server.
Syntax : SQLINE <nickmask> :<Reason>
UNSQLINE Command
Un-Bans a Nickname or Nickname mask
Synax : UNSQLINE <nickmask>
SVS2MODE Command
Changes the Usermode of a nickname
Syntax : :services.somenet.com SVS2MODE <nickname> +<mode>
SVSFLINE Command
Adds the given Filename mask to DCCDENY
Syntax: :server SVSFLINE + file :reason (Add the filename)
:server SVSFLINE - file (Deletes the filename)
:server SVSFLINE * (Wipes the DCCDENY list)
SVSMOTD Command
Changes the Services Message Of The Day
Syntax: SVSMOTD # :<text> (Adds to Services MOTD)
SVSMOTD ! (Deletes the MOTD)
SVSMOTD ! :<text> (Deletes and Adds text)
-
October 26th, 2005, 03:19 PM
#2
Banned
er, right...
Those are unrealircd commands, not all IRCDs have them and not everyone uses unrealircd.
-
October 26th, 2005, 03:44 PM
#3
..and not everyone uses unrealircd.
And not everyone replys to 4 year old threads..
ASCII stupid question, get a stupid ANSI.
When in Russia, pet a PETSCII.
Get your ass over to SLAYRadio the best station for C64 Remixes !
-
October 26th, 2005, 06:46 PM
#4
Banned
You just did!
I was aware it was an old thread but there are 0 replies so why not post?
-
October 26th, 2005, 07:00 PM
#5
Nah, he did reply to make you aware of how things goes around here before you get nigged to death .... I hope you have a sense of awareness ....
Welcome to AO
\"The only truly secure system is one that is powered off, cast in a block of concrete and sealed in a lead-lined room with armed guards - and even then I have my doubts\".....Spaf
Everytime I learn a new thing, I discover how ignorant I am.- ... Black Cluster
-
October 26th, 2005, 08:56 PM
#6
Banned
Originally posted here by Black Cluster
Nah, he did reply to make you aware of how things goes around here before you get nigged to death .... I hope you have a sense of awareness ....
Welcome to AO
I heard mods are a bit tough on newbs, but it seems to be a good place.
thanks for the welcome
-
October 26th, 2005, 09:47 PM
#7
Aven..........................
Get yourself a brain before you try playing mind games with me
I heard mods are a bit tough on newbs, but it seems to be a good place.
IRC is better..........................you can talk to Mr. Poopmaster there
-
October 27th, 2005, 12:15 AM
#8
Banned
Excuse me? why the hell are you insulting me? I was NOT playing games with you, I was being honest.
I'm not playing games with you either, I was only saying what others have told me. To be honest with you, it doesn't seem like people are harsh after all. But seriously, why did you insult me? I'm not much of a game-person so I wasn't playing anything with your mind.
Seriously, that insult was out of nowhere. People seem friendly around here, you're not.
Just because you're a new mod, it does NOT mean you're the new god.
And by the way, I understand how you're trying to make some good punctuation and all but 3 dots is enough.
....................................................... is annoying.
What are you going to do now? Ban me? give me a break.
-
October 27th, 2005, 12:30 AM
#9
-
October 27th, 2005, 12:40 AM
#10
Banned
No no no
Ok, now that you know who I am, I will start acting myself.
The point wasn't the ............. that you're doing. But why the **** are you being such a turd? "OH N03Z, NIHIL IZ T3H M0D"
You're a poor addition to the team and all you've done so far is lock and bitch at other members instead of handling things maturely.
Negative already knows it's me. I told him myself.
Here's how your post should've been:
There are no grammer or punctuation rules on the Internet, unless WE decide to impose them. This means that you will see something varying from an English Language thesis to a mobile phone text message. This is the 21st Century kid, get used to it.
Do you deny that you are the perp formerly known as "Aven"?
Do not lie to me
Your last sentence didn't make sense, so forget it.
And my point was not the rule of punctuation... But the ................... were seriously getting annoying, ......................... I'm sure most people agree, but since you're a new mod and trying to act god, they don't want to say anything.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|