Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: IRC operator commands

  1. #1
    AntiOnline Senior Member souleman's Avatar
    Join Date
    Oct 2001
    Location
    Flint, MI
    Posts
    2,883

    IRC operator commands

    See http://www.antionline.com/showthread...hreadid=137369 for basic commands
    See http://www.antionline.com/showthread...hreadid=137507 for useful advanced commands.
    See http://www.antionline.com/showthread...hreadid=137514 for useless advanced commands.

    This is the Operator commands. It also contains the services commands.

    OPER
    Attempts to give a user IRC Operator status.
    Syntax: OPER <uid> <password>

    WALLOPS
    Sends a "Message" to all those with the umode +w.
    Syntax: WALLOPS <message>

    GLOBOPS
    Sends a global "Message" to all IRCops.
    Syntax: GLOBOPS <message>

    CHATOPS Command
    IRCops with the +c flag enabled will be able to send/receive CHATOPS messages.
    Syntax: CHATOPS <message>

    LOCOPS Command
    Similar to GLOBOPS, except only received by those IRCops local to your server.
    Syntax: LOCOPS <message>

    ADCHAT Command
    This command sends to all Admins online. Only for Admins. This is a ChatOps style command.
    Syntax: ADCHAT <text>

    NACHAT Command
    This command sends to all NetAdmins & TechAdmins online. Only for Net/Techadmins. This is a ChatOps style command.
    Syntax: NACHAT <text>

    TECHAT Command
    This command sends to all TechAdmins online. Only for Net/Techadmins. This is a ChatOps style command.
    Syntax: TECHAT <text>

    KILL Command
    Forcefully Disconnects a user from an IRC Server.
    Syntax: KILL <user> <reason>

    KLINE Command
    "Bans" a hostmask from connection to the IRC server.
    Syntax: KLINE <hostmask> <reason>

    UNKLINE Command
    Removes a k:line from the server.
    Syntax: UNKLINE <hostmask>

    ZLINE Command
    Disables all access to the IRC server from a specified IP.
    Syntax: ZLINE <ip> :reason

    UNZLINE Command
    Removes a currently active z:Line.
    Syntax: UNZLINE <ip>

    GLINE command
    This command provides timed G:Lines. If you match a G:Line you cannot connect to ANY server on the IRC network. A time of 0 in the GLINE makes it permanent (Never Expires).
    Syntax: GLINE <user@host mask> <seconds to be banned> :<reason> (Adds a G:line for user@host)
    GLINE -<user@host mask> (Removes a G:line for user@host)

    SHUN Command
    Prevents a user from executing ANY command except ADMIN and respond to Server Pings. This effectively prevents them from doing anything on the server.
    A time of 0 on the SHUN makes it permanent (Never Expires).
    Syntax : SHUN <nickname> <time> :<Reason> (Shun the nickname for time)
    SHUN +<user@host> <time> :<Reason> (Shun the user@host for time)
    SHUN -<user@host> (Removes the SHUN for user@host)
    SHUN (View the current SHUN list)

    AKILL Command (Use Services AKILL Instead)
    Adds an Autokill for the specific host mask. Services Admin & above only ..
    Syntax : AKILL <user@host> :<Reason>

    RAKILL Command (Use Services AKILL Instead)
    Removes an AKILL set by an IRC Operator or Services. Services Admin & above only
    Syntax : RAKILL <user@host>

    REHASH Command
    Prompts the server to reread the configuration files. Only TechAdmins and NetAdmins may specify a server name.
    Syntax: REHASH <servername> -<flags>
    REHASH -<flags>

    RESTART Command
    Kills and restarts the IRC daemon, disconnecting all users currently on that server.
    Syntax: RESTART

    DIE Command
    Kills the IRC daemon, disconnecting all users currently on the current server.
    Syntax: DIE

    LAG Command
    This command is like a Sonar or Traceroute for IRC servers.
    Syntax: LAG <servername>

    SETHOST Command
    This command is so you can change your Virtual host to everything you want to.
    Syntax: SETHOST <new hostname>

    SETIDENT Command
    With this command you can change your Ident (username).
    Syntax: SETIDENT <new ident>

    CHGHOST Command
    Changes the hostname of a user currently on the IRC network.
    Syntax: CHGHOST <nick> <host>

    CHGIDENT Command
    Changes the ident of a user currently on the IRC network.
    Syntax: CHGIDENT <nick> <ident>

    CHGNAME Command
    Changes the "Real Name" of a user currently on the IRC network.
    Syntax: CHGNAME <nick> <name>

    SQUIT Command
    Disconnects an IRC Server from the network.
    Syntax: SQUIT <server>

    CONNECT Command
    Links another IRC server to the one you are currently on.
    Syntax: CONNECT <server>
    CONNECT <hub> <port> <leaf>

    DCCDENY Command
    Adds a DCC Deny for that filename mask.
    Syntax : DCCDENY <filename mask> <reason>

    UNDCCDENY Command
    If the EXACT file you type is found it is removed, else it uses wildcards to search
    Syntax : UNDCCDENY <filename mask>

    SAJOIN Command
    Forces a user to join channel(s). Can only be used by a Services Admin.
    Syntax: SAJOIN <nick> <channel>

    SAPART Command
    Forces a user to leave channel(s). Can only be used by a Services Admin.
    Syntax: SAPART <nick> <channel>

    SAMODE Command
    Allows a Services Administrator to change the mode on a channel.
    Syntax: SAMODE <channel> <mode>

    RPING Command
    This will calculate the milliseconds (Lag) between servers
    Syntax: RPING <servermask>

    TRACE Command
    TRACE is useful to know what servers are connected to what.
    Syntax: TRACE <servername>

    OPERMOTD Command
    Shows the IRCd Operator MOTD.
    Syntax: OPERMOTD

    ADDMOTD Command
    This will add the text you specify to the MOTD. Server Admin & Co-Admin only
    Syntax: ADDMOTD :text

    ADDOMOTD Command
    This will add the text you specify to the Operator MOTD. Server Admin & Co-Admin only
    Syntax: ADDOMOTD :text

    SDESC Command
    With this command you can change your Server Info Line. This is a Server Admin/Co Admin only command
    Syntax: SDESC <New description>

    ADDLINE Command
    This command can be used to add lines to the ircd.conf file Only for Server Admins
    Syntax: ADDLINE <line>

    MKPASSWD Command
    This command will encrypt the string it has been given
    So u can add it directly to the ircd.conf if you use Encrypted passwords.
    Syntax : MKPASSWD <string to be encrypted>

    TSCTL Command
    This is a highly advanced command
    Syntax: TSCTL OFFSET +|- <time> (Adjust internal IRC clock)
    TSCTL TIME (Will give TS report)
    TSCTL ALLTIME (Shows the TS report of all Servers)
    TSCTL SVSTIME <timestamp> (Sets the Time on all servers)

    HTM Command
    Switches the server In & Out of High Traffic Mode. See flags addendum for options.
    Syntax: HTM [option]


    *** Services Commands (U:Lined Server)***

    Must be sent through an U:Lined server.

    SVSNICK Command
    Changes the nickname of the user in question.
    Syntax: SVSNICK <nickname> <new nickname> <timestamp>

    SVSMODE Command
    Changes the mode of the user in question.
    Syntax: SVSMODE <nickname> <usermode>

    SVSKILL Command
    Forcefully disconnects a user from the network.
    Syntax: SVSKILL <user> :<reason>

    SVSNOOP Command
    Enabled or disables whether Global IRCop functions exist on the server in question or not.
    Syntax: SVSNOOP <server> <+/->

    SVSJOIN Command
    Forces a user to join a channel.
    Syntax: SVSJOIN <nick> <channel>[,<channel2>..]

    SVSPART Command
    Forces a user to leave a channel.
    Syntax: SVSPART <nick> <channel>[,<channel2>..]

    SVSO Command
    Gives nick Operflags like the ones in O:lines, remember to set SVSMODE +o and alike.
    Syntax: SVSO <nick> <+operflags> (Adds the Operflags)
    SVSO <nick> - (Removes all O:Line flags)

    SWHOIS Command
    Changes the WHOIS message of the Nickname.
    Syntax: SWHOIS <nick> :<message> (Sets the SWHOIS)
    SWHOIS <nick> : (Resets the SWHOIS)

    SQLINE Command
    Bans a Nickname or a certain Nickname mask from the Server.
    Syntax : SQLINE <nickmask> :<Reason>

    UNSQLINE Command
    Un-Bans a Nickname or Nickname mask
    Synax : UNSQLINE <nickmask>

    SVS2MODE Command
    Changes the Usermode of a nickname
    Syntax : :services.somenet.com SVS2MODE <nickname> +<mode>

    SVSFLINE Command
    Adds the given Filename mask to DCCDENY
    Syntax: :server SVSFLINE + file :reason (Add the filename)
    :server SVSFLINE - file (Deletes the filename)
    :server SVSFLINE * (Wipes the DCCDENY list)

    SVSMOTD Command
    Changes the Services Message Of The Day
    Syntax: SVSMOTD # :<text> (Adds to Services MOTD)
    SVSMOTD ! (Deletes the MOTD)
    SVSMOTD ! :<text> (Deletes and Adds text)

  2. #2
    er, right...
    Those are unrealircd commands, not all IRCDs have them and not everyone uses unrealircd.

  3. #3
    Leftie Linux Lover the_JinX's Avatar
    Join Date
    Nov 2001
    Location
    Beverwijk Netherlands
    Posts
    2,534
    ..and not everyone uses unrealircd.
    And not everyone replys to 4 year old threads..
    ASCII stupid question, get a stupid ANSI.
    When in Russia, pet a PETSCII.

    Get your ass over to SLAYRadio the best station for C64 Remixes !

  4. #4
    You just did!

    I was aware it was an old thread but there are 0 replies so why not post?

  5. #5
    In And Above Man Black Cluster's Avatar
    Join Date
    Feb 2005
    Posts
    912
    Nah, he did reply to make you aware of how things goes around here before you get nigged to death .... I hope you have a sense of awareness ....

    Welcome to AO
    \"The only truly secure system is one that is powered off, cast in a block of concrete and sealed in a lead-lined room with armed guards - and even then I have my doubts\".....Spaf
    Everytime I learn a new thing, I discover how ignorant I am.- ... Black Cluster

  6. #6
    Originally posted here by Black Cluster
    Nah, he did reply to make you aware of how things goes around here before you get nigged to death .... I hope you have a sense of awareness ....

    Welcome to AO
    I heard mods are a bit tough on newbs, but it seems to be a good place.

    thanks for the welcome

  7. #7
    Senior Member nihil's Avatar
    Join Date
    Jul 2003
    Location
    United Kingdom: Bridlington
    Posts
    17,188
    Aven..........................

    Get yourself a brain before you try playing mind games with me

    I heard mods are a bit tough on newbs, but it seems to be a good place.
    IRC is better..........................you can talk to Mr. Poopmaster there

  8. #8
    Excuse me? why the hell are you insulting me? I was NOT playing games with you, I was being honest.

    I'm not playing games with you either, I was only saying what others have told me. To be honest with you, it doesn't seem like people are harsh after all. But seriously, why did you insult me? I'm not much of a game-person so I wasn't playing anything with your mind.

    Seriously, that insult was out of nowhere. People seem friendly around here, you're not.

    Just because you're a new mod, it does NOT mean you're the new god.

    And by the way, I understand how you're trying to make some good punctuation and all but 3 dots is enough.

    ....................................................... is annoying.






    What are you going to do now? Ban me? give me a break.

  9. #9
    Senior Member nihil's Avatar
    Join Date
    Jul 2003
    Location
    United Kingdom: Bridlington
    Posts
    17,188
    Well old chap, I have a bit of news for you

    The internet isn't like that............there are no grammar or punctuation rules, unless WE decide to impose them. This means that you will see something varying from an English Language thesis to a mobile phone text message?................this is the 21st Century kid, get used to it

    Do you deny that you are the perp formerly known as "Aven"?

    Do not lie to me......................I am not due another sense of humour pill for a while yet

  10. #10
    Originally posted here by nihil
    Well old chap, I have a bit of news for you

    The internet isn't like that............there are no grammar or punctuation rules, unless WE decide to impose them. This means that you will see something varying from an English Language thesis to a mobile phone text message?................this is the 21st Century kid, get used to it

    Do you deny that you are the perp formerly known as "Aven"?

    Do not lie to me......................I am not due another sense of humour pill for a while yet
    No no no

    Ok, now that you know who I am, I will start acting myself.

    The point wasn't the ............. that you're doing. But why the **** are you being such a turd? "OH N03Z, NIHIL IZ T3H M0D"

    You're a poor addition to the team and all you've done so far is lock and bitch at other members instead of handling things maturely.

    Negative already knows it's me. I told him myself.

    Here's how your post should've been:

    There are no grammer or punctuation rules on the Internet, unless WE decide to impose them. This means that you will see something varying from an English Language thesis to a mobile phone text message. This is the 21st Century kid, get used to it.

    Do you deny that you are the perp formerly known as "Aven"?

    Do not lie to me


    Your last sentence didn't make sense, so forget it.

    And my point was not the rule of punctuation... But the ................... were seriously getting annoying, ......................... I'm sure most people agree, but since you're a new mod and trying to act god, they don't want to say anything.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •