June 14th, 2002, 10:32 AM
What must I do to get my NIC on my RH Linux 6.1 to work? I have googled, but it kept coming up with drivers which I already have... Thanks!
June 14th, 2002, 10:36 AM
try running the network configuration tools?
Or something similar. I use the Linuxconf network section personally
Just run linuxconf from a command line, or from X if the X version is installed on your system.
June 14th, 2002, 02:06 PM
June 14th, 2002, 07:18 PM
well A LOT MORE INFORMATION would be helpful....... You need to install the driver, to put it simply.
Antionline in a nutshell
\"You\'re putting the fate of the world in the hands of a bunch of idiots I wouldn\'t trust with a potato gun\"
Trust your Technolust
June 17th, 2002, 04:14 AM
I have the drivers, but I don't know how to install it.
I have a d-link, but that is beside the point.
I put in the card, try to get it up and running in linuxconf. At no point did the system ask me for the driver, how do I install the driver?
June 17th, 2002, 05:36 AM
Kudzu is a wonderful powerful program that will detect hardware for you in later versions of RedHat, I just don't remember if it existed in RedHat 6.1. It will handle all the module work for you.
I think some (most?) of the d-link cards use the tulip driver. So you would type 'modprobe tulip' or 'insmod tulip'. And if that gives you errors, then try some of the other common drivers: eepro, eepro100, 3c59x, 8139cp, or 8139too.
June 17th, 2002, 05:50 AM
the tulip driver is Realtek
this works with dynalink/edimax/and all more tulip brands out there
June 18th, 2002, 03:23 AM
Everyone's talking about tulip... what is a tulip?
June 18th, 2002, 05:22 AM
tulip is a driver type for an ethernet adapter (network card).
if you know the name of the driver for the dlink, you can try adding the following to /etc/modules.conf (or /etc/conf.modules):
alias eth0 <dlink_driver_name>
then try the ifconfig command to set an address for it... it might also help to learn the syntax of ifconfig (man ifconfig)
ifconfig eth0 192.168.1.1
\'hi, welcome to *****. if you would like to speak to an operator, please hang up now.\'
* click *
June 18th, 2002, 05:31 AM
simply goto yer nic's website and check to see if they are compliant with linux.
illv // seen the digital world from monochrome dial up to what it is today.