-
August 9th, 2002, 10:12 PM
#1
Junior Member
Linksys firewall router
Does anyone have a way to recover or get into these things. I took over consulting a company and they don't seem to have the password to their router. I don't want to reset to factory defaults and play catch up with what might have been configured on here.
-
August 9th, 2002, 10:16 PM
#2
Honestly, you'll probably have to reset it, sorry. You can always try the default password (check the manual to find out what it is). Otherwise, if that doesn't work, you'll just have to reset it. It's not like there are too many settings that need to be changed. There are only a few screens to go through to configure it. Just reset it and you'll be set.
AJ
-
August 9th, 2002, 10:22 PM
#3
I would see if you could get your HR group/person to call the network admin that was there before... assuming they are the one that set it up.
if they can't get the password from that person then you will probably have to reset it and go from there. Like avdven said it's a pretty easy set up and there shouldn't be too much to configure.
Good luck.
El Diablo
-
August 12th, 2002, 08:20 AM
#4
Junior Member
Thanks guys. I just hoping to not go through the week of users gradually coming up with, oh this doesn't work now and junk like that. Oh well life in the big city as they say.
-
August 13th, 2002, 03:39 PM
#5
Sorry..I forgot you said it was a Linksys. Please disregard this post
-
August 20th, 2002, 03:16 AM
#6
Junior Member
I just set one up for somebody.
Out of the box, the default was "Administrator", <blank> (no p'word)
You could always try that.
Loki
-
August 20th, 2002, 03:20 AM
#7
Username <blank> Pass Admin
-
August 31st, 2002, 08:24 AM
#8
Linksys befsr41 default username: blank password: admin
default password list
-
August 31st, 2002, 06:33 PM
#9
I agree with trying the default username and password. The defaults on my linksys router is,
username admin
password admin
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|