View Poll Results: Are Antipoints getting out of control?
- Voters
- 1. You may not vote on this poll
-
September 29th, 2002, 01:08 AM
#1
Junior Member
PCI Modem (Sorry, This Won't help if you have a Modem emulator{Win-modem})
I have seen many pages written for the modem and its installation but they mainly cover the ISA modems.
This is for the PCI Modem. Now if you are looking here because have a Win-modem I'm sorry, But i cant
help you.
Because todays machines are using pci boards and ISA is a thing of the past, I have written this
in hopes of helping a few souls out thier that need it. I know tht Highspeed access is the rage, and many
think that OMG your still on a Dialup, get High Speed Access (HSA). Well this is not an option for many so
the tried and true moden is the only way.
Most other tutorials will tell you that PCI wont work. Wrong! There are several True modems out
there that do. The Action-Tec Call Waiting Modem and the US Robotics 56k PCI Modem are 2 that I have
used personaly that work just great. With that said, the following instructions are based on those 2 modems.
The best thing to do is to read the box tha the modem comes in to make sure that its NOT a Modem-Emulator
or the so called Win-modem. On to the Nitty Gritty.
It is assumed that you have already installed the hardware as this paper is not intended as to tell you how to
do that. It is also assumed that you Kernel has serial support, and PPPD as well as a communication program
such as Mini-com
Log onto linux and start a terminal session and SU as root
The modem is going to be configured based on the following files that are assumed to be on the system
dev/ttySx or dev/cuax
If by chance they are not there you can add them by this command:
cd dev
./MAKEDEV ttySx (x=port number) ie: ./makedev ttsS4
on open Linux there is no make DEV so the command is:
mknod /dev/ttyS4 c 4 68
mknod/dev/tcua4 c 5 60
(note that in kernels 2.2.x and later the cuax have been depricated)
Next step is to create a few symbolic links
ln -s /dev/ttyS4 /dev/modem (this creates a symbolic link from the dev ttyS4 to dev modem)
chmod 666 /dev/ttyS4
chmod 666 /dev/modem
Now lets determine what communications por the modem is on
cat /proc/pci
Look at the output and find the modem
you might see something like this:
Bus 1, device 8, function 0:
Serial controller: US Robotics/3Com 56K FaxModem Model 5610 (rev 1).
IRQ 10.
I/O at 0xecb8 [0xecbf].
Write down the first input/output (I/O) and the IRQ
now type in this command:
setserial /dev/modem uart 16550a port <your value> irq <your value>
now try it out in mini-com. If it worked add the above command to the following file two times. as such:
in the file /etc/rc.d at the last line
setserial /dev/modem uart 16550a port <your value> irq <your value>
setserial /dev/modem uart 16550a port <your value> irq <your value>
This will insure that the modem is set every time that you boot!
Now lets set up the PPP
Is assumed that you have an ISP and valid account
you will need:
User name (login) and password
the Dial up Telephone number
the IP address thats been assigned (this doesnt apply if your ISP uses a Dynamic IP as Most Do)
The Dynamic Name Server (DNS) addresses (you need at least one i order to translate from
URL names like www.antionlind to the IPV4 IPV6 URL )
PPP comes with some scripts that are alread made that just need to be edited and moved a bit.
you can find them on MOST systems at
/usr/share/doc/ppp-2.x.x (depending on you version of ppp)
type in the following editing to fit your system
cp /usr/share/doc/ppp-2.4.1/scripts/ppp-* /etc/ppp
now cd to the /etc/ppp dir and open up in a text editor the following file
ppp-on
make the changes in the username password telephone numbers and such
also at the bottom of the file change the line that reada /dev/ttyS0 to the tty that you system uses
change the value 38400 to 115200. Save and close
Open up the ppp-on-dialer in an editor
change the setting afer TIMEOUT from 30 to 60
Change the line that reads
exec chat -v to
exec /usr/sbin/chat -v
save and close
Open up /etc/ppp/options and make SURE that there is a line that says LOCK
This prevents other processes from accessing the modem while in use. Save and Close
Now lets set the permissions
Make sure that your in /etc/ppp as root
Set the permissions for the scripts as follows
chmod +x ppp-o*
Now the passowrd is stored Unencrypted (yeah, I know thats not the best way, but hey, it works) so we are
going to se the permissions on that file to 711 (read/write/execute for the owner and execute-only for everyone
else.
chmod 711 ppp-on
chown root ppp-on
chgrp root ppp-on
now open up /etc/resolv.conf and add in the DNS address that was provided by your ISP
Lets make another Symbolic link for the scripts
ln -s /etc/ppp/ppp-off
ln -s /etc/ppp/ppp-off
Thing should be up and working
If you Use a GUI Like X-server and KDE or GNOME you can edit the dialup programs from the GUI
interface and in a few moments be surfing the net to you hearts delight.
Note in KDE KPPP doenst have an entry for DEV above ttyS3 so make sure that you use /dev/modem as we
have already set the link for it
Hoped this helped and happy surfing.
-
September 7th, 2003, 04:56 PM
#2
Junior Member
HOW TO TELNET
Telnet
With the WAC Server running on some IP adress (feel free to do it to your own PC),
connect to the ip on port 21 or telnet. To connect to yourself, the IP is 127.0.0.1.
Note: I have the new telnet, here is a screen shot
For me, to connect to an IP is (xxx is ip) o xxx.xx.x.xx
This is what it look slike to me after I connect to my WAC Server:
Welcome to WAC Server 1.4 Build 0725. (C) Foxit Software, 2002-2003
Evaluation Version. Maximum 2 users.
Host: XXXXXX, OS: Windows XP
Please use your Windows username and password to logon.
Username: Xxxxxx
Password: ****
Domain:
If all goes right, something like the next screenshot should pop up...
From there, act like it was your own machine. Its quite easy to lean and fun.
Note:You dont need to use telnet, you might have a program called Terminal. It's like telnet, only
bigger font. Try it and see if you like it. It is located in...
C:\Program Files\QPC\QVTNet\bin\Term.exe.
I might just put it up on the page later on... But I think telnet is better.
LIFE\'S A BITCH
THEN DEBIAN WAS INVENTED
-
September 7th, 2003, 05:15 PM
#3
Yeah, except telnet sucks now...
SSH FOR LIFE!!!@!!111
...This Space For Rent.
-[WebCarnage]
-
June 2nd, 2004, 03:39 AM
#4
Errrr,
If you bump an old thread up, please post something to indicate why you have done it?
Thanks
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|