D-Link firewall Rules/settings
Results 1 to 2 of 2

Thread: D-Link firewall Rules/settings

  1. #1
    Elite Hacker
    Join Date
    Mar 2003
    Posts
    1,407

    D-Link firewall Rules/settings

    What should I set my firewall rules for on the d-link?
    Here are the options:

    Name:.....________
    Action:.....Allow/Deny

    ................Interface...IP range start......end.....protocol...port.....range
    source:..... _______...___________.....___
    destination:______... ___________.....___....______....____....____

    Schedule....always or at certain times

    .......................Rules

    Action..............Name ...............................Source..........Destination....................Protocol
    Allow/deny......allow to ping WAN port......WAN,*...........LAN, MY.IP.IS.HERE........ICMP,8
    Allow/deny......default...............................*,* ..............LAN,*.............................IP (0),*
    Allow/deny......default...............................LAN,*...........*,*.................................IP (0),*

    and if I ever wanted to connect to my desktop remotely would I have to have the firewall off
    or could I set up something with a password that the firewall wouldn't block?

    Thanks for any advice.

  2. #2
    Typicaly you would want to deny everything, then go back and enable the things that you need. The most common is port 80.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •