July 8th, 2003 02:04 AM
HDD capacity prob
i have 1 hard disk 20GB with 2 parts C and D
they should be 10 each but when i check the capacity of
i tried to get em back to the normal capacity 10GB for each by formatting them all but the problem remain
i scaned the system with Norton Anti Virus and Anti Trojan they said system is clean
how can i get that messing capasity?and wat cause the problem?
disk drive:GENERIC IDE DISK TYPE 47(that wat the Device Manger said)
thanx n advance
July 8th, 2003 03:17 AM
How did you partition the hard disk? Fdisk.
July 8th, 2003 05:16 AM
Check out Partition Magic and save your data...no FDISK (which is the command for creating partitions, not FORMAT), no mess, no fuss.
It isn't paranoia when you KNOW they're out to get you...
July 8th, 2003 05:31 AM
Yeah I would definitely suggest something like Partition Magic.
I'm thinking that if he Fdisked that he might of messed up somewhere in the partitions size.
July 9th, 2003 04:31 PM
coolcamel, I don't think you have lost any of your HDD capacity.
It depends what you mean by 'Mb' i.e. 1000*1000 or 1024*1024!
HDD manafactures use the first one, whereas your PC uses the second, which is about a 5% difference. Bit dishonest if you ask me
As to splitting your HDD down the middle, what you need to do is to use fdisk.
Delete your existing partions, and recreate them - you'll be able to get a bit more than 9Gb out of both of them.
July 11th, 2003 08:56 PM
hi, sorry am late
i did not make the partion ,i bought it like that .
not a trade mark ( custom made).and it was 10 and 10 .
i thought capacity of C will be 13.9+(4.65 )in case if i delete the (D=4..65 GB).
but C capacity still the same(C=13.9GB).i used Fdisk to delete the D.
now what?any help.
July 11th, 2003 10:20 PM
Why don't you try to either do what allenb suggested, which is to use partion magic. Or go back into Fdisk delte all partitions, then redo them. make one partion %50 of the total disk and do the same with the other. Don foget to make a logical dos drive in the second partition.
July 12th, 2003 02:24 AM
thanks for ur time ppl
thats waht am going to do: (pls correct me if am wrong)
1- i will erase the partion by using Fdisk
2- i will install winxp
3- then am going to make the partion by using( Partition Magic).
i havnt done that befor ,so if i missed somthing up there pls say it .
thanks 4 ur time ppl.
July 12th, 2003 04:44 AM
Your gonna have to have a partion before you can install XP.
Use a bootable floppy for your computer. If you don't have one to www.bootdisk.com . Turn off your computer-->put the floppy in the A: drive--> Power on the computer. then what you want to do is get to the command prompt. Type fdisk. It should then bring you to a screen asking you if you want to enable large disk support. Select yes. You will then have several options.
1.Create a new partition
2.Create a logical dos drive in the extended partition.
3.Delete a partition.
4.View partition information.
It will be something similiar to that. What you want to do is delete a dos partition. So select a number that corresponds to that. Then select the drive and delete it. I believe that you have to restart your computer then. Keep the A: disk in the drive and reboot. Get back to Fdisk again, but this time you want ot create a new partition. Select the number corresponding to that. Since your not to experienced with this I would suggest using all available disk space. It will then do a couple things.
Next, reboot the computer with floppy still in the drive. However do not go to Fdisk this time. Instead when you get to a command prompt which should look something like this c:> type format c:
then select yes.
After Hard Disk is formatted install you Windows XP.
Hope I helped you.