I keep getting an error when using a utility called Total Copy. It says that there isnt enough system rescources to continue the copy... I have been running a 'diagnostic' and have found that this can be temporarily fixed by dumping most of the system cache... This only seems to work a few times for bigger copies (have to restart if it doesnt), but works seemingly indefinatley for ones that are less than about 800 meg. When I get the error on larger transfers and I hit resume to try to get it to work; the kernel time skyrockets to about 50 - 80% for around 8-12 seconds. While any copy is in progress the system cache slowly fills up; once it gets to about 500 meg it pops up the error (this is when I dumb system cache). I havent the slightest clue as to what kind of 'rescource' it is talking about or how to fix this.

Specs:
Hardware:
P4 2.4Ghz HT (overclocked sucessfully and stable-like to 2.99)
1024Meg DDR (3 sticks 2 256 and one 512)
80Gig HDD (unknown brand)
GeForce4 MX 440 with AGP8X
Misc: SCSI card and a tape backup device, external USB2 HDD, external dvd RAMdrive.
Software:
Win XP Pro (completely patched)
VS.Net (full)
and the usual other appz...

Thanx in advance guys!