-
May 15th, 2004, 01:07 PM
#11
Member
I have checked it on other system, bios detects it but operating system not.
-
May 15th, 2004, 01:13 PM
#12
Member
If i copy the cih virus removal utility on other system's disk, and try to correct it by attatch the damaged drive as slave. It is right?
-
May 15th, 2004, 03:31 PM
#13
Poppy~
Yes, that is what I was trying to suggest...............the CIH virus can attack both BIOS and hard drive, so clean the drive on another machine first.
That will tell you if your BIOS has been attacked on the first machine? Otherwise, attach a known working drive with operating system to the first machine (as the master) and see if it boots. That should tell you about the condition of the BIOS on the first machine?
Good luck
-
May 16th, 2004, 08:07 AM
#14
Huh, I have never heard of a virus that actually screws with the BIOS like that. My bad nihil, I will leave the rest to you while I investigate this.
/edit
So I read up on the CIH and that is some pretty crazy stuff. Pisses off the hardrive and flashes the bios! And everyone thought MSBlaster was harsh. Hell if a virus like this got big, I mean damn. And it wouldn't be all that hard to pull off. Just include a flash utility with the virus and run it.
You shall no longer take things at second or third hand,
nor look through the eyes of the dead...You shall listen to all
sides and filter them for your self.
-Walt Whitman-
-
May 16th, 2004, 02:46 PM
#15
euhhhhn... Is see many people here refer to Seagate for a Quantum disk. While Seagate and Quantum do use similar software (I believe they both use Ontrack) for their hdd diagnostic tools, Quantum disks are not Seagate.
Some info:
Quantum is a manufacturer of very good harddisks and several tape products. Recently (a few years ago) they are bought by MaXtor, the harddisk division is taken over by MaXtor. Quantum now concentrates on the professional (backup) market. So new harddisks with the label Quantum are past.
MaXtor provides a diagnostic tool on their website for your Quantum disk.
-
May 16th, 2004, 02:46 PM
#16
Member
nihil wrote
attach a known working drive with operating system to the first machine (as the master) and see if it boots. That should tell you about the condition of the BIOS on the first machine?
Yes I have checked, bios works fine..
-
May 20th, 2004, 06:52 AM
#17
Member
on the other system, bios is detecting but OS is not detecting, nor that utility from grc.com, I have checked, it is also unable to repair it.
Infact I need my data on it otherwise I have to format manually to make Fat or ntfs on it.
-
May 20th, 2004, 07:27 AM
#18
Member
Nihil Yes I have checked on other system. but Operating system is unable to detect it. grc's utility is also unable to repair it, infact I have important data on it. otherwise I have to format it for fat or ntfs.
-
May 20th, 2004, 11:03 AM
#19
OK Poppy~
I will have to find a few tools for you. I am rather busy for the next few hours so please be patient!
I have a few questions:
1. How big is the drive that does not work?
2. How much free space is there on your other machine's hard drive?
3. What was the operating system on the drive that does not work?
4. What operating system have you on your other machine?
I have two gameplans:
PLAN "A"
Put drive into original machine, boot with floppy disk, run a repair tool on the drive.
PLAN "B"
Copy your files off the drive onto the second machine.............then just format the drive, as you mentioned. We need to be sure that you have enough space to do that, so you might like to do a bit of housekeeping and defragment the drive of the second machine.
ALSO!!!!!!!!!!!!
Be sure to update the antivirus on your second machine.........we will need to scan the copied files before they are opened!!!!!!!!!!!!!!!! God knows what might be in there?
Good luck
I will get back to you later today.
-
May 21st, 2004, 06:39 PM
#20
Member
1-10gb
2-15gb
3- winme
4- winxp
thanks nihil, Plan A, I will check it, Plan B is possible If plan A is succeeded. I will check and reply soon.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|