Annoying problem...
Results 1 to 3 of 3

Thread: Annoying problem...

  1. #1
    Senior Member
    Join Date
    Jul 2004
    Posts
    177

    Annoying problem...

    Hi all, i've an annoying problem here...

    I have here Nokia equipment with three interfaces. Until now every interface had its own address. Now i put a new adress in one of them so i have one physical interface that has one logical interface that has two (the new and the old one) addresses in different networks.

    Now, in the same switch where this interface is connected and where hosts that have "old" net adresses are connected, i connect a host with an address of the "new" net. I configure (for testing purpses) a rule in the checkpoint that allow ICMP traffic between any hosts and setup this rule to log all the matches.

    Ok, until now the scenario, i hope that you will be able to follow me even though my english

    If I ping from new machine (the one in the new net) to the new address of the nokia interface, i get no reply, no matches showed in the log BUT i can see ICMP packets in nokia's tcpdump... Well, at this point i have no idea what's going on...

    What do you think guys, some of you can help me?

    Thank you!

  2. #2
    Just Another Geek
    Join Date
    Jul 2002
    Location
    Rotterdam, Netherlands
    Posts
    3,403
    Turn off the firewall and enable routing on the Nokia. If this works it's one (or more) of your firewall rules that's blocking it.

    Don't forget the implied rules and/or the anti-spoofing filters!
    Oliver's Law:
    Experience is something you don't get until just after you need it.

  3. #3
    Senior Member
    Join Date
    Jul 2004
    Posts
    177
    It was the spoofing filters... :P

    Thank you!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

 Security News

     Patches

       Security Trends

         How-To

           Buying Guides