Results 1 to 5 of 5

Thread: Wanna Go Wireless?

  1. #1
    IT Specialist Ghost_25inf's Avatar
    Join Date
    Sep 2001
    Location
    Michigan
    Posts
    648

    Post Wanna Go Wireless?

    Here is an article I wrote for a company when I was a freelance writer.

    thought some of you would like to read up on wireless.

    Want to go Wireless?

    Seems like everyone these days are loosing the line for more mobility. Like the advancements in phone technology (cell phones), computers have done the same. Well I’m here to tell you all the good points and bad points about going Wireless.

    What’s right for me?

    Wireless comes in a couple different speeds 802.11b running at 11 Mbps (Mega bits per second), and 802.11g running at 54 Mbps. Now depending on how much traffic is on your personal network meaning “how much transferring of data between your computers within your network”, will be the decision factor in what you should get. If you only have one computer or laptop and wish to be anywhere in the house and get connected then 802.11b would work just fine. If you are the person that thinks they work for Microsoft and need that extra few Mega bits pushed thru then go with the 802.11g, but realize you are going to pay a lot more for that little extra transfer rate. Won’t having a G Wireless network get you faster transfer speeds over the internet? No, the internet runs any where from 56 Kbps to 266 Kbps depending if you have dial-up or cable, and we all know that a Kbps is much smaller than a Mbps. So unless you have fiber optic cable running strait into your home, running with a B WIFI will be fast enough for that gamer in the family.

    How do I secure my WIFI from Hackers?

    Well if you know how to read a manual then you are on a good start towards securing your WIFI connection. Normally when you secure your WIFI you need to do this from inside the Access Point and this can be achieved by typing in the IP address of the Access Point. Normally the IP will be 192.168.1.1 and you should get a log in box pop up. Check your manual for the correct default password and user name. Once you are in you should see a tab up above that says security, click on this. In the security tab, you can choose to secure your WIFI using encryption. The higher the number encryption level the more secure your WIFI will be. The encryption you choose will also need a key that you can specify, type in a key that you will be able to remember or you are going to be up some creek with out the paddle. This key will be needed when you go to connect your computer to the Access Point later. I also strongly suggest you also change your default password and user name also in the Access Point so that Hackers don’t go in and change the setting. Once you have all this set and you spent some time looking around your Access Point now you are secure and your computer will tell you this much when it asks you for that Encryption Key you made earlier.

    Why can’t my computer connect in my bedroom?

    Their could be several different reasons to this problem. One, your to far away from the Access Point and cant pick up the signal. Two, you may have a interference problem caused by EMI or RFI so move your Access Point away from any power cords, lights, radios, microwaves, or anything else that could cause interference. You may not know this but brick walls can also interfere with your Wireless connection. My best suggestion is to place the Access Point in the middle of the home, so that the signal can make it to all areas of the house.

    How can a Hacker find my Wireless?

    With a good old soup can and a free software tool (that I will not name here) and the information on how to build a cantenna (www.cantenna.com) is all you need to sniff out that wireless signal, and if you weren’t smart enough to secure your Access Point then you’re in for a treat. This type of Hacking is called War Driving; having first hand experience in War Driving, I can tell you that it is very effective at finding Wireless connections. But let’s not be too paranoid over Hackers and wireless for if you follow my guide you should be somewhat safe. I say somewhat because even the best encryption can stop a determined hacker.
    S25vd2xlZGdlIGlzIHBvd2VyIQ

  2. #2
    why must hackers ALWAYS get viewed as bad, i would replace those with crackers, im probably starting a big arguement but hackers did start the computer revolution, anyways its nice, do you plan to push this towards a public audience or something? yea also including updates for os's and updates for the hardware ap's and such is also good.

    I say somewhat because even the best encryption can stop a determined hacker.
    also wep has been cracked, doesnt matter what kind "encryption"

  3. #3
    Senior Member
    Join Date
    Jul 2003
    Posts
    634
    check out warlinux, it cracks WEP, not even a determined hacker needs to be determined to type about 2 commands and let it run...

    I would of said something about a long phrase for key, that makes brute forcing more time consuming,

    chec this link ouot you may find it useful - http://www.catb.org/~esr/faqs/hacker-howto.html

    i2c

  4. #4
    IT Specialist Ghost_25inf's Avatar
    Join Date
    Sep 2001
    Location
    Michigan
    Posts
    648
    I understand that WEP can be hacked, Kismet is a good tool for this. But really the question is who is doing the Hacking (sorry for the Hacker stereotype, but most people see crackers as someone who cracks software code), I can see if you lived in a populated city and your apartment or home is close to a road where the signal will reach just fine, but if you live on a decent sized lot you should have issues of people hacking your wireless and if they are just look whos in your driveway. As you may notice I didn't mention anything about the SSID and how to hide it. You must understand that these articles are intended for people with little or no knowledge of the subject. I wrote these articles for a Company in the US Army, so the majority of my readers are not computer savy. Wireless secrutity has many holes and like any new technology it will take years to perfect. But for now if your looking to keep the wannabes out this would be the way to do it.
    S25vd2xlZGdlIGlzIHBvd2VyIQ

  5. #5
    IT Specialist Ghost_25inf's Avatar
    Join Date
    Sep 2001
    Location
    Michigan
    Posts
    648

    Re: Wanna Go Wireless?

    Originally posted here by Ghost_25inf
    I say somewhat because even the best encryption can stop a determined hacker.
    Just wanted to point out the (can) was a typo I ment to say (cant) thanks to incideagent for pointing out my mistake. I tend to miss some of my mistakes when I profread my articles.
    S25vd2xlZGdlIGlzIHBvd2VyIQ

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •