-
August 23rd, 2005, 05:08 PM
#1
Whistling PSU
No tunes just a very high pitched whistle/whine.
It's a 360W Chieftec unit. It's done it for probably 6 months and I never thought anything of it until I was reading about another guys PSU probs.
Time to replace?
If so any recommendations for a quality basic PSU. No feckin LEDs or 23 fans I'm not into modding just like things to work well.
I'd probably look at an Antec or an Enermax PSU ~400W but they're not cheap.
-
August 23rd, 2005, 05:28 PM
#2
Take a quick look at the fan and see if there is anything obvious there that could cause the whistling noise as that is the obvious culprit. Don't open it up though if you can help it!
If you do replace it dont get one that is less than 360w, since that is the one you already have and make sure it has enough molex connectors for your needs. - I'd prob pay around £35 mark for an avarage one in UK.
-
August 23rd, 2005, 06:43 PM
#3
Can you say Fortron? The egg has been running specials on these too! Fortron has an exemplary reputation.
- Fortron
- PC Power & Cooloing
- Sparkle
- SeaSonic
- OCZ
- Antec
Your basic cream of the crop.
$36
Dual 12v rail
Read on the back for its MAX power......they always fudge those front page numbers.
http://www.newegg.com/Product/Produc...82E16817104952
I recommend at the minimum this one, but I'm thinking future.
http://www.newegg.com/Product/Produc...82E16817104954
Rest of the list 300-400w: http://www.newegg.com/Product/Produc...ubmit=Property
I'm using Antec true controller and a Fortron Blue.
-
August 24th, 2005, 04:42 PM
#4
Doesn't sound like a fan noise. More like a flash charging on a camera.
<starts to magine big capacitors full of charge and starts to worry >
-
August 24th, 2005, 06:31 PM
#5
Originally posted here by Aspman
Doesn't sound like a fan noise. More like a flash charging on a camera.
<starts to magine big capacitors full of charge and starts to worry >
Take the sucker apart and look at the caps.. I have seen caps that were burst that made the same sort of noise.
N00b> STFU i r teh 1337 (english: You must be mistaken, good sir or madam. I believe myself to be quite a good player. On an unrelated matter, I also apparently enjoy math.)
-
August 24th, 2005, 08:16 PM
#6
Sounds like a 'charging cap'
that's exactly what a whistling fan sounds like ..........
give the fan a good blow out, AND a well positioned finger into the centre to check for bearing wobble .............
you will probably get a quieter fan just by doing this, which will PROVE it IS the fan beginning to fail
do NOT replace JUST the fan
for QUIET spares I go here
so now I'm in my SIXTIES FFS
WTAF, how did that happen, so no more alterations to the sig, it will remain as is now
Beware of Geeks bearing GIF's
come and waste the day :P at The Taz Zone
-
August 24th, 2005, 08:40 PM
#7
I didn't know you were trying a fix. I personally leave my comps on when I leave the house; I'd be a little worried myself. But take it apart and post some pics. IMHO it sounds like a crummy PFC. I'd start looking at the (PFC) power factor correction, and let's have a look at that LC network. Depending on what method of circuitry they used of course. If that's a sophisticated network they probably gave an extra diode and capacitor in that PFC. What's the brand? If you can find the schematic that would be great.
Personally I need pictures.
I'm sure nihil will throw some insight into the mix.
Edit: We go to Silent PC over here foxy.
-
August 25th, 2005, 09:56 AM
#8
Cheers gents.
Will try cleaning out the fan first and if it persisits I'll pop the sucker apart and have a look at the caps. I'll post pics if I'm not sure.
The PSU is a Chieftec 360W (don't know the exact model) it came with the case a Chieftec Dragon Medium Tower (in loverly blue).
I'll do it tonight if I've got time, I'm putting up coving tonight and I've got some plastering to do but after that if she'll let me finish early. I really hate DIY
-
August 25th, 2005, 11:10 AM
#9
I'm putting up coving tonight and I've got some plastering to do
Bloody Hell Asp ............
just how big IS this PC
so now I'm in my SIXTIES FFS
WTAF, how did that happen, so no more alterations to the sig, it will remain as is now
Beware of Geeks bearing GIF's
come and waste the day :P at The Taz Zone
-
August 25th, 2005, 11:11 AM
#10
Actually ..
Take the sucker apart and look at the caps.. I have seen caps that were burst that made the same sort of noise
it isnt so much the Capacitors making that noise.. But due to their not filtering the DC properly OR passing the wrong range of frequency harmonics to a transformer.. the High pitch whistle (that often varies with load) is the Former (the metal part) of the transformer rattling, or more a sub harmonic of the rattle..
I'd start looking at the (PFC) power factor correction, and let's have a look at that LC network. Depending on what method of circuitry they used of course.
Imitationrust had the closest to the point here
"Consumer technology now exceeds the average persons ability to comprehend how to use it..give up hope of them being able to understand how it works." - Me http://www.cybercrypt.co.nr
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|