-
August 28th, 2005, 12:54 AM
#1
Junior Member
cannot read disc - press control + alt + del to restart
I bought a new computer yesterday that has a Athlon 64 bit processor. I installed Windows XP home edition and everything was fine. A friend and I wanted to try Windows 64 bit edtion so we got a trial release. We made a new partition for the new operating system and installed it with no problems until we had to reboot. The error message "Cannot Read Disc - press Control + Alt + Del to restart" now appears every time I turn the computer on. Using the windows recovery console I deleted the problematic/new partition. I've tried fdisk and fixmbr but neither of them have helped. I am currently running chkdsk /r but its taking forever. I would REALLY prefer not to have to reformat the harddrive but if it comes to that I guess I have no choice. Any help would be appreciated.
What meaning has my life that the inevitability of death cannot destroy it?
-
August 28th, 2005, 01:55 AM
#2
Banned
1. Use only one copy of WinXP
2. Use a legit copy of WinXP
3. Make sure all PC components are 64-bit compatible
4. Make sure drives are connected (properly)
5. Uninstall Home before installing 64-bit Ed.
6. THINK BEFORE YOU POST!
-
August 28th, 2005, 02:04 AM
#3
Banned
DialupDaemon lol wtf....really think before you ask HOW. It isn't much of a hassle to reformat anyways. My advice, you should have thought twice about buying that computer. Take it back to Khampfrestryke.
-
August 28th, 2005, 10:28 AM
#4
Hi dialupdaemon
I would reformat and reinstall, it is by far the cleanest solution in the long run.
I can't say I am surprised that you can't dual boot a 32 bit home edition with a 64 bit professional one. The 64 bit product is aimed at quite a specialist market.
Just my £0.02
-
August 28th, 2005, 11:17 AM
#5
Wow, do I get banned if I post in this thread!!
Dialupdaemon , like you said it was a "Trial Version" - these things happen, thats the nature of trial/beta versions of software, unexpected things happen.
I would have a guess that some 64 bit code/drivers etc has found its way into somewhere that doesnt understand what it is and is refusing to boot because of it. Prob in your MBR, I know you said you ran the fix utillity but was that from the 32 bit O/S or 64 bit?
The easiest solution by far would be to format your hard disc- you say you prefer not to but you should have maybe thought about backing it up if you knew you where about to start playing with 64 bit O/S's.
Hope it helped!!
-
August 28th, 2005, 11:36 AM
#6
Nokia makes a good point. As we don't really know what happened we cannot be certain that any attempt to "fix" will actually leave you with a stable system. Given that the machine is almost brand new, a reformat and reinstallation would seem the best option.
If I wanted to play with a trial 64 bit OS I would replace the HDD first and install onto that
-
August 28th, 2005, 12:32 PM
#7
Member
Hello every1,
If I may ask, what 64bit operating system did you install??? And the trial version you got was it a beta release or a finall version with limited time or functions???
I suggest you dont dual boot using some trial OS, If you realy want to try it, do it on a fresh system, and please read the "readme.1st" file b4 starting the installation.
Wish you all the success.
Regards
The FACT that people ignore FACTS
doesnt mean that FACTS are not FACTS
-
August 28th, 2005, 06:02 PM
#8
Junior Member
I used a program called Partition Table Doctor to create a boot disk which hopefully would have fixed my problem. The program immediately discovered some errors and fixed them and I also ran the recommeded procedure called fixboot which supposedly fixed my problem. Now when I boot up I get the option to choose between Windows XP Pro and Windows XP Home. XP Pro is running as the default OS even though I never put it on the computer, so I'm guessing that the attempted install of the x64 OS is resposible. If I let the computer boot into Pro, a message comes up saying "Windows could not start because of a computer disk hardware configuration problem. Could not read from the selected boot disk. Check boot path and disk hardware."
If I select to run Windows XP Home, it boots up like normal but when it gets to the screen where you select which user you would like to use, there are no users to select from. I tried using safe mode but the same problem occurs: it gets to the user selection screen and there are none there.
Is this a problem that can be fixed? Or is all hope lost and I have to resort to reformating?
What meaning has my life that the inevitability of death cannot destroy it?
-
August 28th, 2005, 06:17 PM
#9
Well, I really don't think it is worth messing with, given the potential stability question. I would just go for the reformat.
-
August 28th, 2005, 07:59 PM
#10
Take your pick of the OS's you want to repair....................Then do a repair install.
You probably trounced the registry with your second OS install. Windows of any flavour likes to be the one and the only one installed on a single HDD or Computer for that matter.
What happens if a big asteroid hits the Earth? Judging from realistic simulations involving a sledge hammer and a common laboratory frog, we can assume it will be pretty bad. - Dave Barry
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|