-
September 1st, 2005, 02:39 AM
#1
Senior Member
RAID 5 Hardware howto
Is there a website here i can learn step by step how to make RAID 5 with hardware controler?
Thanks
-
September 1st, 2005, 02:59 AM
#2
-
September 1st, 2005, 03:05 AM
#3
Senior Member
I was looking for the BIOS scsi controler Setup. The server is already mounted, with 4 Hard-Drives, but i would like to have an example how to configure a Hardware RAID 5 Controler BIOS Step by Step.
This is to make sure that i don't do any mistakes.
Thanks
-
September 1st, 2005, 03:17 AM
#4
Well
I was looking for the BIOS scsi controler Setup. The server is already mounted, with 4 Hard-Drives, but i would like to have an example how to configure a Hardware RAID 5 Controler
Then I would go to the scsi contoller vendors web site.....and read the manual
help if you suuplied us with more details
My car wont start............what should I do?????
MLF
How people treat you is their karma- how you react is yours-Wayne Dyer
-
September 1st, 2005, 03:29 AM
#5
Senior Member
The RAID controller will get to me tomorrow, so i had yet no chance to read the manual, and i think this is not the kind of stuff that is detailed in a RAID Controler... i guess... but if it's there, i will read the manual
Thanks
-
September 1st, 2005, 03:59 AM
#6
When you boot the machine...the scsi controller should be listed....
And then a google seach may help.....
sounds like it may already be setup????
Windows server will recognize as one big hardrive.....partition as needed...I would think any other OS....but not sure....... such as *nix.........
Hardware raid is managed at the contoller...which then sends the configuration to the OS\software
or the OS reads from the controller....
However.........its the controller manual you will need to setup hardware RAID....as it is the hardware tat s managing it
Better than software raid...IMHO...
as always
MLF
How people treat you is their karma- how you react is yours-Wayne Dyer
-
September 1st, 2005, 11:03 PM
#7
Senior Member
I have started to configure the RAID. Got in the SCSI controler BIOS, configured it to RAID 5,
Stripe size = 64kb
read caching = y
write caching with battery= y
I split my hard drive in two partitions
c:\ = 20Gb (system)
d:\ = 180Gb (rest of the space avaible)
Someone have just told me, that RAID 5 for operative system its not good, the windows will not work correctly, is this true?
Thanks
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|