September 30th, 2005, 05:37 PM
Ten steps to secure networking!
I found this article very informative. This can be used as a useful guidline to secure your network, I hope you will find useful.
Secure networking ensures that the network is available to perform its appointed task by protecting it from attacks originating inside and outside the organization.
Traditional thinking equates this to a handful of specific requirements, including user authentication, user device protection and point solutions. However, the move to convergence, together with greater workforce mobility, exposes networks to new vulnerabilities, as any connected user can potentially attack the network.
Application traffic must be securely delivered across the network, avoiding threats such as theft of intellectual property or private data. In addition, the underlying infrastructure must be protected against service disruption (in which the network is not available for its intended use) and service theft (in which an unauthorized user accesses network bandwidth, or an authorized user accesses unauthorized services).
While most organizations focus on securing the application traffic, few put sufficient infrastructure focus beyond point solutions such as firewalls. To protect the total network, security must be incorporated in all layers and the complete networking life cycle.
Secure networking layers
* Secure networking involves securing the application traffic as it traverses the network. It should encompass these areas:
* Perimeter security protects the network applications from outside attack, through technologies such as firewall and intrusion detection.
* Communications security provides data confidentiality, integrity and nonrepudiation, typically through the use of Secure Sockets Layer or IPsec virtual private networks (VPN).
Secure networking extends this by protecting the underlying infrastructure from attack.
* Platform security ensures that each device is available to perform its intended function and doesn't become the network's single point of failure. The network security plan should include antivirus checking and host-based intrusion detection, along with endpoint compliance, to ensure that security policies check user devices for required security software.
* Access security ensures that each user has access to only those network elements and applications required to perform his job.
* Physical security protects the network from physical harm or modification, and underlies all security practices. The most obvious forms of physical security include locked doors and alarm systems.
Secure networking life cycle
Providing a secure network is not a one-time event, but rather a life cycle that must be continually reviewed, updated and communicated. There are three distinct stages to be considered:
How can security breaches be prevented? Along with hardening of operating systems and antivirus software, prevention includes processes to regularly review the network's security posture, which is particularly important as new convergence and mobility solutions or new technologies and platforms are added to the network.
How can security breaches be detected? Although some breaches are obvious, others are much more subtle. Detection techniques include product-level and networkwide intrusion-detection systems, system checks and logs for misconfigurations or other suspicious activity.
What is the appropriate response to a security breach? A range of preparations must be made to respond to a successful breach, some of which may include the removal of infected devices or large-scale disaster recovery.
Standards for secure networking
To ensure a consistent set of requirements, lower training costs and speed the introduction of new security capabilities, IT managers should use these 10 security techniques across their networks.
1. Use a layered defense. Employ multiple complementary approaches to security enforcement at various points in the network, therefore removing single points of security failure.
2. Incorporate people and processes in network security planning . Employing effective processes, such as security policies, security awareness training and policy enforcement, makes your program stronger. Having the people who use the network (employees, partners and even customers) understand and adhere to these security policies is critical.
3. Clearly define security zones and user roles. Use firewall, filter and access control capabilities to enforce network access policies between these zones using the least privileged concept. Require strong passwords to prevent guessing and/or machine cracking attacks, as well as other strong forms of authentication.
4. Maintain the integrity of your network, servers and clients. The operating system of every network device and element management system should be hardened against attack by disabling unused services. Patches should be applied as soon as they become available, and system software should be regularly tested for viruses, worms and spyware.
5. Control device network admission through endpoint compliance. Account for all user device types -- wired and wireless. Don't forget devices such as smart phones and handhelds, which can store significant intellectual property and are easier for employees to misplace or have stolen.
6. Protect the network management information. Ensure that virtual LANs (VLAN) and other security mechanisms (IPsec, SNMPv3, SSH, TLS) are used to protect network devices and element management systems so only authorized personnel have access. Establish a backup process for device configurations, and implement a change management process for tracking.
7. Protect user information. WLAN/Wi-Fi or Wireless Mesh communications should use VPNs or 802.11i with Temporal Key Integrity Protocol for security purposes. VLANs should separate traffic between departments within the same network and separate regular users from guests.
8. Gain awareness of your network traffic, threats and vulnerabilities for each security zone, presuming both internal and external threats. Use antispoofing, bogon blocking and denial-of-service prevention capabilities at security zone perimeters to block invalid traffic.
9. Use security tools to protect from threats and guarantee performance of critical applications. Ensure firewalls support new multimedia applications and protocols, including SIP and H.323.
10. Log, correlate and manage security and audit event information. Aggregate and standardize security event information to provide a high-level consolidated view of security events on your network. This allows correlation of distributed attacks and a networkwide awareness of security status and threat activity.
\"The only truly secure system is one that is powered off, cast in a block of concrete and sealed in a lead-lined room with armed guards - and even then I have my doubts\".....Spaf
Everytime I learn a new thing, I discover how ignorant I am.- ... Black Cluster