-
November 2nd, 2005, 11:10 PM
#1
doing some hack/games
how can i can i pipe a telnet output into a text file in window...
i'm using regular windows telnet
-
November 2nd, 2005, 11:16 PM
#2
Dude, did u try microsoft.com? I did and within 5 seconds I found this... im sure your answer is in there.. just look around a bit, do some Googling... not hard at all.
http://search.microsoft.com/search/r...n-us&qu=Telnet
-
November 2nd, 2005, 11:21 PM
#3
that is not the point texan ... i know how to use telnet ... all i don't know how to do is for windows 2k telnet client spit the out put into the text files
UNIX IS user friendly, it\'s just very choosy about who it calls a friend.
-
November 2nd, 2005, 11:33 PM
#4
I am not sure if it is possible to "telnet > text.file".
But it is possible to select, copy and paste into the notepad or some other editor.
Do you want to automate some functions based on analyse of telnet output results?
// too far away outside of limit
-
November 3rd, 2005, 12:12 AM
#5
Texan had it right, chase down the third entry in the search and you will find the command line instructions. There is a logging function in telnet that will log to a local text file.
-
November 3rd, 2005, 01:46 AM
#6
Windows telnet sucks. Use Putty.
3.2 Creating a log file of your session
For some purposes you may find you want to log everything that
appears on your screen. You can do this using the `Logging' panel in
the configuration box.
To begin a session log, select `Change Settings' from the system
menu and go to the Logging panel. Enter a log file name, and select
a logging mode. (You can log all session output including the
terminal control sequences, or you can just log the printable text.
It depends what you want the log for.) Click `Apply' and your log
will be started. Later on, you can go back to the Logging panel and
select `Logging turned off completely' to stop logging; then PuTTY
will close the log file and you can safely read it.
See section 4.2 for more details and options.
Full doc found Here.
Hope this helps.
-
November 3rd, 2005, 09:37 AM
#7
Geez, ever tried this :
Code:
C:\>telnet --help
But since you're lazy i'll copy/paste it ...
Code:
C:\>telnet --help
telnet [-a][-e escape-teken][-f logbestand][-l gebruiker][-t term]
[host [poort]]
-a Een poging tot automatisch aanmelden. Vergelijkbaar met de optie -l,
met als verschil dat de naam van de aangemelde gebruiker wordt
gebruikt.
-e Het escape-teken waarmee de prompt van de telnet-client wordt
weergegeven.
-f De bestandsnaam voor het vastleggen van logboekgegevens aan de
clientkant.
-l De gebruikersnaam waarmee wordt aangemeld bij het externe systeem.
Het externe systeem moet ondersteuning bieden voor de optie
TELNET ENVIRON.
-t Het type terminal.
De ondersteunde terminaltypen zijn vt100, vt52, ansi en vtnt.
host De hostnaam of het IP-adres van de externe computer
waarmee verbinding moet worden gemaakt.
poort Een poortnummer of servicenaam.
C:\>
So try the -f function ....
*** EDIT ***
LMAO, I just notice this is a dutch dos version. Anyway the english --help function will work too.
-
November 3rd, 2005, 12:10 PM
#8
One other option is to use the windows version of NetCat..
http://www.vulnwatch.org/netcat/
Oliver's Law:
Experience is something you don't get until just after you need it.
-
November 3rd, 2005, 12:38 PM
#9
One other option is to use the windows version of NetCat..
especially the -l function of netcat is usefull .... for us ....
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|