doing some hack/games

[Kosmograd]

how can i can i pipe a telnet output into a text file in window...

i'm using regular windows telnet

[The Texan]

Dude, did u try microsoft.com? I did and within 5 seconds I found this... im sure your answer is in there.. just look around a bit, do some Googling... not hard at all.

http://search.microsoft.com/search/r...n-us&qu=Telnet

[Kosmograd]

that is not the point texan ... i know how to use telnet ... all i don't know how to do is for windows 2k telnet client spit the out put into the text files

[MrBabis]

I am not sure if it is possible to "telnet > text.file".
But it is possible to select, copy and paste into the notepad or some other editor.

Do you want to automate some functions based on analyse of telnet output results?

[rapier57]

Texan had it right, chase down the third entry in the search and you will find the command line instructions. There is a logging function in telnet that will log to a local text file.

[ech0]

Windows telnet sucks. Use Putty.

3.2 Creating a log file of your session

For some purposes you may find you want to log everything that
appears on your screen. You can do this using the `Logging' panel in
the configuration box.

To begin a session log, select `Change Settings' from the system
menu and go to the Logging panel. Enter a log file name, and select
a logging mode. (You can log all session output including the
terminal control sequences, or you can just log the printable text.
It depends what you want the log for.) Click `Apply' and your log
will be started. Later on, you can go back to the Logging panel and
select `Logging turned off completely' to stop logging; then PuTTY
will close the log file and you can safely read it.

See section 4.2 for more details and options.

Full doc found Here.

Hope this helps.

[Raiden]

Geez, ever tried this :

C:\>telnet --help

But since you're lazy i'll copy/paste it ...

C:\>telnet --help

telnet [-a][-e escape-teken][-f logbestand][-l gebruiker][-t term]
       [host [poort]]

 -a      Een poging tot automatisch aanmelden. Vergelijkbaar met de optie -l,
         met als verschil dat de naam van de aangemelde gebruiker wordt
         gebruikt.
 -e      Het escape-teken waarmee de prompt van de telnet-client wordt
         weergegeven.
 -f      De bestandsnaam voor het vastleggen van logboekgegevens aan de
         clientkant.
 -l      De gebruikersnaam waarmee wordt aangemeld bij het externe systeem.
         Het externe systeem moet ondersteuning bieden voor de optie
         TELNET ENVIRON.
 -t      Het type terminal.
         De ondersteunde terminaltypen zijn vt100, vt52, ansi en vtnt.
 host    De hostnaam of het IP-adres van de externe computer
         waarmee verbinding moet worden gemaakt.
 poort   Een poortnummer of servicenaam.

C:\>

So try the -f function ....

*** EDIT ***

LMAO, I just notice this is a dutch dos version. Anyway the english --help function will work too.

[SirDice]

One other option is to use the windows version of NetCat..

http://www.vulnwatch.org/netcat/

[Raiden]

One other option is to use the windows version of NetCat..

especially the -l function of netcat is usefull .... for us ....