Linux connection problem
Results 1 to 8 of 8

Thread: Linux connection problem

  1. #1
    Banned
    Join Date
    Jun 2004
    Posts
    154

    Linux connection problem

    I just got a new Linux Live CD called SLAX KillBill Edition v 5.0.6.
    I can get it to boot and run just fine, but the problem is that when I try to access the internet it will not connect. I have a wireless internet connection via a USB adapter. I don't think that it is recognizing the USB Adapter to use to access the net. I don't know much about linux so I could be very wrong . Anyway any instructions or suggestions would be much appreciated.
    Thanks

    P.S. i did the following
    Code:
    lsmod
    
    Module                  Size  Used by
    ipv6                  237856  8 
    snd_pcm_oss            47648  1 
    snd_mixer_oss          16896  2 snd_pcm_oss
    ohci_hcd               19844  0 
    usb_storage            60480  1 
    eth1394                18568  0 
    via_agp                 8448  1 
    ohci1394               31796  0 
    ieee1394               88376  2 eth1394,ohci1394
    uhci_hcd               29968  0 
    ehci_hcd               31368  0 
    i2c_viapro              7824  0 
    i2c_core               18432  1 i2c_viapro
    snd_via82xx            23872  2 
    gameport               12680  1 snd_via82xx
    snd_ac97_codec         76540  1 snd_via82xx
    snd_pcm                78212  3 snd_pcm_oss,snd_via82xx,snd_ac97_codec
    snd_timer              21764  1 snd_pcm
    snd_page_alloc          8452  2 snd_via82xx,snd_pcm
    snd_mpu401_uart         7040  1 snd_via82xx
    snd_rawmidi            20768  1 snd_mpu401_uart
    snd_seq_device          7948  1 snd_rawmidi
    snd                    47972  9 
    
    snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
    soundcore               8032  3 snd
    via_rhine              20996  0 
    mii                     5504  1 via_rhine
    evdev                   8320  0 
    pcmcia                 21388  0 
    yenta_socket           20232  0 
    rsrc_nonstatic         11520  1 yenta_socket
    pcmcia_core            42756  3 pcmcia,yenta_socket,rsrc_nonstatic
    nls_utf8                2688  1 
    agpgart                29772  1 via_agp
    psmouse                27268  0 
    nls_iso8859_2           5376  0 
    unionfs               238968  1 
    squashfs               31924  10 
    isofs                  32828  1 
    zlib_inflate           17920  2 squashfs,isofs
    loop                   14472  20
    Dont know if that helps

  2. #2
    Just Another Geek
    Join Date
    Jul 2002
    Location
    Rotterdam, Netherlands
    Posts
    3,403
    What brand/type is your wireless USB NIC?
    Oliver's Law:
    Experience is something you don't get until just after you need it.

  3. #3
    Banned
    Join Date
    Jun 2004
    Posts
    154
    Linksys Wireless G USB Adapter with Speedbooster

  4. #4
    Just Another Geek
    Join Date
    Jul 2002
    Location
    Rotterdam, Netherlands
    Posts
    3,403
    Not sure what type that is, have a look here:
    http://linuxwifi.com/modules/wiwimod/?page=DeviceList

    If all else fails, you might be able to get it working using ndiswrapper.
    Oliver's Law:
    Experience is something you don't get until just after you need it.

  5. #5
    Senior Member
    Join Date
    Sep 2005
    Posts
    221
    Can you type : "iwconfig -a" and see what you get?
    Definitions: Hacker vs. Cracker
    Gentoo Linux user, which probably says a lot about me..
    AGA member 14460 || KGS : Trevoke and games archived

  6. #6
    Shrekkie Reloaded Raiden's Avatar
    Join Date
    Oct 2005
    Posts
    1,115
    How about

    Code:
    #lsusb
    and
    Code:
    #ifconfig
    or
    Code:
    #dmesg | more
    first ?

    I have a linksys pcmcia card and it works nicely with ndiswrapper. A whole while back i wrote a tut on ndiswrapper here too (it should be in Other Tutorials).

    Cheers.

  7. #7
    Banned
    Join Date
    Jun 2004
    Posts
    154
    I looked on that hardware list and found my adapter, Its WUSB54GS, but there is nothing on that site that i can do about it.

    As for "iwconfig -a"

    Code:
    iwconfig
    lo                          no wireless extensions
    eth0                      no wireless extensions
    eth1                      no wireless extensions
    sit0                       no wireless extentsions
    
    iwconfig -a
    -a no such device
    When I do lsusb ipconfig and dmesg I get the following :
    Code:
    #lsusb
    Bus 005 Device 002: ID 058f:9360 Alcor Micro Corp. 
    Bus 005 Device 001: ID 0000:0000  
    Bus 004 Device 001: ID 0000:0000  
    Bus 003 Device 001: ID 0000:0000  
    Bus 002 Device 002: ID 1241:1177 Belkin (?) 
    Bus 002 Device 001: ID 0000:0000  
    Bus 001 Device 007: ID 0781:7113 SanDisk Corp.  <-- I think this is my pen drive
    Bus 001 Device 003: ID 13b1:000e  
    Bus 001 Device 001: ID 0000:0000  
    
    #ipconfig
    -bash:ipconfig:command not found
    
    #dmesg
    Linux version 2.6.12.2 (root@slax) (gcc version 3.3.5) #1 SMP Sun Jul 3 23:44:06 GMT 2005
    BIOS-provided physical RAM map:
     BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
    BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
    BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    127MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000f6040
    On node 0 totalpages: 262128
    DMA zone: 4096 pages, LIFO batch:1 
    Normal zone: 225280 pages, LIFO batch:31  
    HighMem zone: 32752 pages, LIFO batch:15
    DMI 2.3 present.
    ACPI: RSDP (v000 KM400                                 ) @ 0x000f7b50
    ACPI: RSDT (v001 KM400  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
    ACPI: FADT (v001 KM400  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
    ACPI: MADT (v001 KM400  AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff8280
    ACPI: DSDT (v001 KM400  AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x4008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 6:10 APIC version 16
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode:  Flat.  Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
    Built 1 zonelists
    Kernel command line: max_loop=255 initrd=boot/initrd.gz init=linuxrc load_ramdisk=1 prompt_ramdisk=0 ramdisk_size=4444 root=/dev/ram0 rw BOOT_IMAGE=boot/vmlinuz 
    mapped APIC to ffffd000 (fee00000)
    mapped IOAPIC to ffffc000 (fec00000)
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 65536 bytes)
    Detected 2101.406 MHz processor.
    Using pmtmr for high-res timesource
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 1032984k/1048512k available (2844k kernel code, 14668k reserved, 1087k data, 220k init, 131008k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay loop... 4153.34 BogoMIPS (lpj=2076672)
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
    CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    CPU0: AMD Athlon(tm) XP 3000+ stepping 00
    Total of 1 processors activated (4153.34 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 pin1=2 pin2=-1
    Brought up 1 CPUs
    CPU0 attaching sched-domain:
     domain 0: span 01
      groups: 01
      domain 1: span 01
       groups: 01
    checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
    Freeing initrd memory: 943k freed
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xfbcc0, last bus=1
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    ACPI: Subsystem revision 20050309
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    Boot video device is 0000:01:00.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *5
    ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
    ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
    ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
    ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
    ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    SCSI subsystem initialized
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    NTFS driver 2.1.22 [Flags: R/W].
    SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
    SGI XFS Quota Management subsystem
    Initializing Cryptographic API
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Real Time Clock Driver v1.12
    PNP: No PS/2 controller found. Probing ports directly.
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered
    floppy0: no floppy controllers found
    RAMDISK driver initialized: 16 RAM disks of 4444K size 1024 blocksize
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    VP_IDE: IDE controller at PCI slot 0000:00:0f.1
    ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
    ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
    ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
    PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 4
    VP_IDE: chipset revision 6
    VP_IDE: not 100% native mode: will probe irqs later
    VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
        ide0: BM-DMA at 0xc400-0xc407, BIOS settings: hda: DMA, hdb: pio
        ide1: BM-DMA at 0xc408-0xc40f, BIOS settings: hdc: DMA, hdd: DMA
    Probing IDE interface ide0...
    hda: ST3160021A, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdc: LITE-ON DVDRW SOHW-1693S, ATAPI CD/DVD-ROM drive
    hdd: HP DVD Writer 400, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    Probing IDE interface ide2...
    Probing IDE interface ide3...
    Probing IDE interface ide4...
    Probing IDE interface ide5...
    hda: max request size: 1024KiB
    hda: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63, UDMA(100)
    hda: cache flushes supported
     hda: hda1 hda2
    hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    hdd: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
    ide-floppy driver 0.99.newide
    libata version 1.11 loaded.
    sata_via version 1.1
    ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 20
    PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 4
    sata_via(0000:00:0f.0): routed to hard irq line 4
    ata1: SATA max UDMA/133 cmd 0xAC00 ctl 0xB002 bmdma 0xBC00 irq 20
    ata2: SATA max UDMA/133 cmd 0xB400 ctl 0xB802 bmdma 0xBC08 irq 20
    ata1: no device found (phy stat 00000000)
    scsi0 : sata_via
    ata2: no device found (phy stat 00000000)
    scsi1 : sata_via
    usbmon: debugs is not available
    usbcore: registered new driver hiddev
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.01:USB HID core driver
    mice: PS/2 mouse device common for all mice
    NET: Registered protocol family 2
    IP: routing cache hash table of 8192 buckets, 64Kbytes
    TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    Initializing IPsec netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    ACPI wakeup devices: 
    PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 USBA LAN0 MC97 UAR1 ECP1 
    ACPI: (supports S0 S1 S3 S4 S5)
    RAMDISK: Compressed image found at block 0
    input: AT Translated Set 2 keyboard on isa0060/serio0
    VFS: Mounted root (ext2 filesystem).
    Freeing unused kernel memory: 220k freed
    loop: loaded (max 255 devices)
    Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
    Registering unionfs 071805-1518
    cdrom: open failed.
    cdrom: open failed.
    cdrom: open failed.
    cdrom: open failed.
    cdrom: open failed.
    cdrom: open failed.
    cdrom: open failed.
    cdrom: open failed.
    ReiserFS: hdc: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hdc
    VFS: Can't find ext3 filesystem on dev hdc.
    VFS: Can't find an ext2 filesystem on dev hdc.
    FAT: bogus number of reserved sectors
    VFS: Can't find a valid FAT filesystem on dev hdc.
    NTFS-fs error (device hdc): ntfs_fill_super(): Device has unsupported hardsect_size.
    XFS: bad magic number
    XFS: SB validate failed
    ISO 9660 Extensions: Microsoft Joliet Level 3
    ISO 9660 Extensions: RRIP_1991A
    ReiserFS: hda: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda
    VFS: Can't find ext3 filesystem on dev hda.
    VFS: Can't find an ext2 filesystem on dev hda.
    FAT: invalid media value (0xea)
    VFS: Can't find a valid FAT filesystem on dev hda.
    NTFS-fs error (device hda): read_ntfs_boot_sector(): Primary boot sector is invalid.
    NTFS-fs error (device hda): read_ntfs_boot_sector(): Mount option errors=recover not used. Aborting without trying to recover.
    NTFS-fs error (device hda): ntfs_fill_super(): Not an NTFS volume.
    XFS: bad magic number
    XFS: SB validate failed
    Unable to identify CD-ROM format.
    SQUASHFS error: Can't find a SQUASHFS superblock on hda
    ReiserFS: hda1: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda1
    VFS: Can't find ext3 filesystem on dev hda1.
    VFS: Can't find an ext2 filesystem on dev hda1.
    ReiserFS: hda2: warning: sh-2021: reiserfs_fill_super: can not find reiserfs on hda2
    VFS: Can't find ext3 filesystem on dev hda2.
    VFS: Can't find an ext2 filesystem on dev hda2.
    FAT: bogus number of reserved sectors
    VFS: Can't find a valid FAT filesystem on dev hda2.
    NTFS volume version 3.1.
    Linux agpgart interface v0.101 (c) Dave Jones
    NTFS volume version 3.1.
    Linux Kernel Card Services
      options:  [pci] [cardbus] [pm]
    Intel ISA PCIC probe: not found.
    Device 'i82365.0' does not have a release() function, it is broken and must be fixed.
    Badness in device_release at drivers/base/core.c:83
     [<c027e803>] kobject_cleanup+0x83/0x90
     [<c027e810>] kobject_release+0x0/0x10
     [<c027f133>] kref_put+0x33/0x80
     [<c027e836>] kobject_put+0x16/0x20
     [<c027e810>] kobject_release+0x0/0x10
     [<f8803260>] init_i82365+0x180/0x197 [i82365]
     [<c0137072>] sys_init_module+0x142/0x1e0
     [<c0103069>] syscall_call+0x7/0xb
    Databook TCIC-2 PCMCIA probe: not found.
    via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
    ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23
    ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
    ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [ALKD] -> GSI 23 (level, low) -> IRQ 23
    PCI: Via IRQ fixup for 0000:00:12.0, from 10 to 7
    eth0: VIA Rhine II at 0xe6003000, 00:0e:a6:c4:db:37, IRQ 23.
    eth0: MII PHY found at address 1, status 0x7849 advertising 01e1 Link 0000.
    eth0: link down
    via82xx: Assuming DXS channels with 48k fixed sample rate.
             Please try dxs_support=1 or dxs_support=4 option
             and report if it works on your machine.
    ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
    ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
    ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 22
    PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 6
    PCI: Setting latency timer of device 0000:00:11.5 to 64
    ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
    ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
    ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
    PCI: Via IRQ fixup for 0000:00:10.4, from 255 to 5
    ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0
    ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:10.4: irq 21, io mem 0xe6002000
    ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 8 ports detected
    USB Universal Host Controller Interface driver v2.2
    ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
    PCI: Via IRQ fixup for 0000:00:10.0, from 255 to 5
    uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    usb 1-4: new high speed USB device using ehci_hcd and address 3
    uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:10.0: irq 21, io base 0x0000c800
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
    PCI: Via IRQ fixup for 0000:00:10.1, from 255 to 5
    uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
    uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:10.1: irq 21, io base 0x0000cc00
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
    PCI: Via IRQ fixup for 0000:00:10.2, from 255 to 5
    uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
    uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:10.2: irq 21, io base 0x0000d000
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 21
    PCI: Via IRQ fixup for 0000:00:10.3, from 255 to 5
    uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)
    uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:10.3: irq 21, io base 0x0000d400
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    usb 2-1: new low speed USB device using uhci_hcd and address 2
    input: USB HID v1.00 Mouse [1241:1177] on usb-0000:00:10.0-1
    ieee1394: Initialized config rom entry `ip1394'
    ohci1394: $Rev: 1250 $ Ben Collins <bcollins@debian.org>
    ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 19
    ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]  MMIO=[e6001000-e60017ff]  Max Packet=[2048]
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    agpgart: Detected VIA KM400/KM400A chipset
    agpgart: AGP aperture is 64M @ 0xe0000000
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    usb 5-1: new full speed USB device using uhci_hcd and address 2
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    Initializing USB Mass Storage driver...
    scsi2 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e018000074bac5]
    eth1394: $Rev: 1247 $ Ben Collins <bcollins@debian.org>
    eth1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
    shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
    ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
      Vendor: Generic   Model: USB SD Reader     Rev: 1.00
      Type:   Direct-Access                      ANSI SCSI revision: 00
    Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0
      Vendor: Generic   Model: USB CF Reader     Rev: 1.01
      Type:   Direct-Access                      ANSI SCSI revision: 00
    Attached scsi removable disk sdb at scsi2, channel 0, id 0, lun 1
      Vendor: Generic   Model: USB SM Reader     Rev: 1.02
      Type:   Direct-Access                      ANSI SCSI revision: 00
    Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 2
      Vendor: Generic   Model: USB MS Reader     Rev: 1.03
      Type:   Direct-Access                      ANSI SCSI revision: 00
    Attached scsi removable disk sdd at scsi2, channel 0, id 0, lun 3
    usb-storage: device scan complete
    eth0: link down
    NET: Registered protocol family 10
    Disabled Privacy Extensions on device c048b1c0(lo)
    IPv6 over IPv4 tunneling driver
    eth0: link down
    usb 1-5: new high speed USB device using ehci_hcd and address 7
    scsi3 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 7
    usb-storage: waiting for device to settle before scanning
      Vendor: SanDisk   Model: Cruzer Micro      Rev: 2033
      Type:   Direct-Access                      ANSI SCSI revision: 00
    SCSI device sde: 512000 512-byte hdwr sectors (262 MB)
    sde: Write Protect is off
    sde: Mode Sense: 02 00 00 00
    sde: assuming drive cache: write through
    SCSI device sde: 512000 512-byte hdwr sectors (262 MB)
    sde: Write Protect is off
    sde: Mode Sense: 02 00 00 00
    sde: assuming drive cache: write through
     sde: sde1
    Attached scsi removable disk sde at scsi3, channel 0, id 0, lun 0
    usb-storage: device scan complete
    Hopefully some of that helps Thanks .

  8. #8
    Leftie Linux Lover the_JinX's Avatar
    Join Date
    Nov 2001
    Location
    Beverwijk Netherlands
    Posts
    2,535
    Code:
    #ipconfig
    -bash:ipconfig:command not found
    The command is called ifconfig that might help.. The windows basterdization is ipconfig though...

    I'm guessing the 'Alcor Micro Corp.' usb item is a multi card reader (from dmesg)..

    So my guess for the USB wifi would be the 'Belkin' or do you have some bluetooth dongle or something ??

    Some info on a simmilar usb wifi thingy can be found here: http://atmelwlandriver.sourceforge.net/howto/howto.html
    ASCII stupid question, get a stupid ANSI.
    When in Russia, pet a PETSCII.

    Get your ass over to SLAYRadio the best station for C64 Remixes !

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

 Security News

     Patches

       Security Trends

         How-To

           Buying Guides