I just got a new Linux Live CD called SLAX KillBill Edition v 5.0.6.
I can get it to boot and run just fine, but the problem is that when I try to access the internet it will not connect. I have a wireless internet connection via a USB adapter. I don't think that it is recognizing the USB Adapter to use to access the net. I don't know much about linux so I could be very wrong . Anyway any instructions or suggestions would be much appreciated.
Thanks
P.S. i did the following
Code:
lsmod
Module Size Used by
ipv6 237856 8
snd_pcm_oss 47648 1
snd_mixer_oss 16896 2 snd_pcm_oss
ohci_hcd 19844 0
usb_storage 60480 1
eth1394 18568 0
via_agp 8448 1
ohci1394 31796 0
ieee1394 88376 2 eth1394,ohci1394
uhci_hcd 29968 0
ehci_hcd 31368 0
i2c_viapro 7824 0
i2c_core 18432 1 i2c_viapro
snd_via82xx 23872 2
gameport 12680 1 snd_via82xx
snd_ac97_codec 76540 1 snd_via82xx
snd_pcm 78212 3 snd_pcm_oss,snd_via82xx,snd_ac97_codec
snd_timer 21764 1 snd_pcm
snd_page_alloc 8452 2 snd_via82xx,snd_pcm
snd_mpu401_uart 7040 1 snd_via82xx
snd_rawmidi 20768 1 snd_mpu401_uart
snd_seq_device 7948 1 snd_rawmidi
snd 47972 9
snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 8032 3 snd
via_rhine 20996 0
mii 5504 1 via_rhine
evdev 8320 0
pcmcia 21388 0
yenta_socket 20232 0
rsrc_nonstatic 11520 1 yenta_socket
pcmcia_core 42756 3 pcmcia,yenta_socket,rsrc_nonstatic
nls_utf8 2688 1
agpgart 29772 1 via_agp
psmouse 27268 0
nls_iso8859_2 5376 0
unionfs 238968 1
squashfs 31924 10
isofs 32828 1
zlib_inflate 17920 2 squashfs,isofs
loop 14472 20
Dont know if that helps