September 7th, 2006, 01:10 AM
Ok, I'm probably going to have to reinstall RedHat, but I finally figured out a way to copy the files I need. I couln't create a directory for the USB harddrive to mount to, so I thought, what the hell, I'll try and put it as the mnt directory itself, and walah, it works. Thanks for your help so much. I'll still keep you posted on if I get it to work or not.
The only four things i need are food, water, a computer, and the internet.
September 7th, 2006, 11:21 AM
This is bad, very bad.
The thing is that the partion (I think thats what its called but correct me if i'm wrong) that holds the /etc/ folder has no free space, so the fstab file is empty
Who set up the partitions?
Why does it appear full?
Which is why I am guessing the system has SELinux enabled.
After the reboot, we keep getting sent to a shell promt, except that whenever we try to empty out the /etc folder, it says its a read-only filesystem
Again, under SELinux, you may have read capabilities, but not write.
but if I try to write to /var, it allows me to.
How were you booting?
Single user mode?
Again, how were you attempting to boot to it, and do you have SELinux enabled?
How can I gain the ability to erase on the /etc drive?
If you do, did you write any policies yourself?
Just bare in mind, I am not bashing you unless it was you who set up the system. It sounds like, and you may indeed, be dealing with a system that was set up by someone who is either no longer there and/or did not know what they were doing.
It just sounds odd to me that /etc would be on a partition by itself, and/or full.
Especially since /var is writable.
Opus00 was correct as I understand it, RH4 uses ext3 by default.
What comes to mind first is that this is a system that is on read only media with certain directories on read/write media.
Second was the SELinux scenario.
So what else is on the /etc partition?
If the /etc partition is full, then either it is on read only media, the person who installed it did not know what they were doing, or the system was compromised and you have a whole lot of sh*t on there that shouldn't be.
If this is a legitimate system, and if you suspect a compromise, contact the authorities.
If you suspect that it is due to a mis configuration or equipment failure, the first thing I would do is pull it off line and replace it. Then "dd" the drive. Work with the copy to find out what happened and to recover data.
There are ways to turn off SELinux if this was the problem, but it sounds like it was not.
If you are using RH4, then Red Hat should be able to help recovering data and accessing the drive.
Another thing that had me dismayed:
If this person is working administering linux network boxes, are they aware that USB devices under *nix might show up as scuzzy devices?
I couln't create a directory for the USB harddrive to mount to, so I thought, what the hell, I'll try and put it as the mnt directory itself, and walah, it works.
THe more I read, the more I shake my head.
" And maddest of all, to see life as it is and not as it should be" --Miguel Cervantes
September 7th, 2006, 02:24 PM
IIRC if fstab is empty the system doesn't know what filesystems there are. If this happens the system will boot to single user mode. It'll ask which shell you want to run. The root filesystem / will always be mounted read-only. After a filesystem check a mount -u / will remount root read/write.
Usually /etc is on the root filesystem, so try to find out where it filled up.. And AFAIK if the filesystem fills up it doesn't destroy existing files. So I'm not sure why fstab is empty.. Maybe some admin nuked it? Perhaps it had a crash and that corrupted fstab?
DO NOT clean out /etc! There are lots of config files/startup scripts in there that are needed to properly boot.
Experience is something you don't get until just after you need it.
September 8th, 2006, 12:30 PM
Perhaps he just lost journalling on the partition? or perhaps try to mount -o rw /etc?