Results 1 to 3 of 3
  1. #1
    Member bradlesliect's Avatar
    Join Date
    Apr 2006
    CT - SA

    DHCP Problems - Cisco router


    Me again ......

    Having problems with the c877w not assigning addresses from the DHCP pool. Not sure why. I am not able to get the address from the pool. below an extract.

    The other problem I have at another site is that the IP connectivity keeps dropping. Same setup as below with a switch inbetween router and workstations.

    < extract from config >

    no ip dhcp use vrf connected
    ip dhcp excluded-address
    ip dhcp pool mynetwork
    import all
    domain-name mydomain.com
    interface BVI1
    ip address
    ip nat inside
    ip virtual-reassembly
    ip tcp adjust-mss 1452

    < end of extract >
    .....I rather not say....

  2. #2
    Member TheX1le's Avatar
    Join Date
    Sep 2006
    bradlesliect i dont know about your dhcp issue unless there is a rouge dhcp server on the network how ever for your other issue i have an idea. I once had to fix a network with much the same issue as it turned out the switch was bad and was dropping random packets. If i pinged the gateway with 60 packets of a size of about 8000k i would lose about 6-10 of them which was enough to cause network drops. I found this by pinging from differnt devices on the network and once i took the switch offline and put in a new one every thing was great. I may be totaly off but its a start. The one i had to replace was a 16 port Linksys switch from dell. Good luck and let us know how it goes.
    ...."Cant stop the signal Mel, Every thing goes some where and i go every where."...... "From here to the eyes and the ears of the verse, thats my motto or might be if i start having a motto" - Mr. Universe "Serenity"

  3. #3
    Senior Member
    Join Date
    Mar 2004
    1. Would it be safe to assume your ethernet interface is configured as 172.18.43.x as well?

    2.What kind of switch is it and how many devices are plugged into the switch?

    3. Is it not assigning addresses at all or just stops serving address?

    4. Is this a new install?

    After looking at your configuration again, I would take out the "import all" seeing that you are specifying your DNS servers.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

We have made updates to our Privacy Policy to reflect the implementation of the General Data Protection Regulation.