post dailup screen for adsl
Results 1 to 6 of 6

Thread: post dailup screen for adsl

Threaded View

  1. #1
    Junior Member
    Join Date
    Nov 2006
    Posts
    2

    Question post dialup screen for adsl


    i want to know how to bring the "Post dial-up screen" or equivalent if someone is using a broadband connection that uses an ADSL modem, utilizes the "PPPoE" protocol and hence does not need any number to connect to isp and only username and password is required.

    if someone is using a dailup connection using a dial-up modem then the post dailup screen can be bought by enableing the "show terminal window" option in modem properties but what in this case?

    my main aim is to go the isp router promt where i can manually input userId and password

    I am using HUAWEI smartAx MT841 adsl modem

    an interesting thing this modem when turned on assigns 192.168.1.1 as the default gateway address (its own address as it has an in built switch)

    when i log into this using telnet (port 23) the default id and pass supplied by the manufacturer and type ? i get this



    -->
    802.1x 802.1x port based authentication
    WLAN Configure Wireless Module
    agent Get a file from a remote host
    atmloopback commands to configure remote ATM loopback
    autoprov
    bridge Configure layer 2 bridge
    console Console access
    ddns
    dhcpclient DHCP client configuration commands
    dhcpserver DHCP server configuration commands
    diagnosticTest
    dnsclient DNS client configuration commands
    dnsrelay DNS relay configuration
    ethernet Commands to configure ethernet transports
    firewall Firewall configuration commands
    help Top level CLI help
    igmp
    imdebug Directly access the information model
    ip Configure IP router
    logger Log to a remote host using syslog
    nat NAT configuration commands
    port Physical port configuration commands
    pppoa PPP over ATM configuration
    pppoe
    radclient RADIUS Client Configuration commands
    rfc1483 Commands to configure RFC1483 transports
    security Security configuration commands not specific to NAT or firewall
    sntpclient
    source Read a file of commands
    system System administration commands
    tftpc TFTP client commands
    transports Transport configuration commands
    user User commands
    webserver Webserver configuration commands
    wpa Configure WPA (Wireless Protected Access)
    zipb Configure Dynamic ZIPB mode
    -->
    802.1x 802.1x port based authentication
    WLAN Configure Wireless Module
    agent Get a file from a remote host
    atmloopback commands to configure remote ATM loopback
    autoprov
    bridge Configure layer 2 bridge
    console Console access
    ddns
    dhcpclient DHCP client configuration commands
    dhcpserver DHCP server configuration commands
    diagnosticTest
    dnsclient DNS client configuration commands
    dnsrelay DNS relay configuration
    ethernet Commands to configure ethernet transports
    firewall Firewall configuration commands
    help Top level CLI help
    igmp
    imdebug Directly access the information model
    ip Configure IP router
    logger Log to a remote host using syslog
    nat NAT configuration commands
    port Physical port configuration commands
    pppoa PPP over ATM configuration
    pppoe
    radclient RADIUS Client Configuration commands
    rfc1483 Commands to configure RFC1483 transports
    security Security configuration commands not specific to NAT or firewall
    sntpclient
    source Read a file of commands
    system System administration commands
    tftpc TFTP client commands
    transports Transport configuration commands
    user User commands
    webserver Webserver configuration commands
    wpa Configure WPA (Wireless Protected Access)
    zipb Configure Dynamic ZIPB mode
    -->

    but after this point i am unable to dial or log into the isp .plz help

    thnx
    Last edited by nihil; November 22nd, 2006 at 11:42 AM. Reason: typo

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

 Security News

     Patches

       Security Trends

         How-To

           Buying Guides