Win2003 com1 and accessing Cisco devices problem issue
Results 1 to 2 of 2

Thread: Win2003 com1 and accessing Cisco devices problem issue

  1. #1
    Senior Member
    Join Date
    Dec 2004
    Posts
    140

    Win2003 com1 and accessing Cisco devices problem issue

    I have got my laptop Dell D620 with win2003 server (SP1) with all updates , I have been experiencing this issue when I try to access a router , pix, IDS, I can not.

    I though that the problem with cable, or a device itself, then when I used another PC with XP (not 2003), there was no problem.

    It happened , I have installed the fresh copy of win2003 on my laptop, still the same problem is going on.

    Please pay attention that this happened in two incidents : before installation fresh copy of win2003 and after installation !!!!!

    Do I need to do some specific configuration to com1 port ?

    Please see the details for the D620ís com1 in the link below

    http://img119.imageshack.us/img119/6339/comimageso5.jpg

  2. #2
    Senior Member
    Join Date
    Dec 2004
    Posts
    140
    I used HyperTerminal and SecureCRT

    9600baud, 8 data bits, no parity, 1 stop bit, and NO FLOW CONTROL.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •