how to set up DNS w/ static IP
Results 1 to 3 of 3

Thread: how to set up DNS w/ static IP

  1. #1
    Senior Member very_unhappy's Avatar
    Join Date
    Jun 2006

    how to set up DNS w/ static IP

    I was never clear on this little issue.

    If i want to set up a static IP on a system on a network shared via little home router, what should i enter as DNS servers for the NIC itself? Should I just refer it to the router (gateway) or enter the actual DNS server of my ISP? It actually works both ways but which is the "correct" way?
    /dev/humor: not found

  2. #2
    AOs Resident Troll
    Join Date
    Nov 2003
    I always point to the router...(or server...which points to the router.)

    The router gets its DNS from the ISP

    I think if you had several machines all going out to the ISP for would cause a most DSL\Cable connections are 1-5MB and an internal LAN is usually 100MB.

    Plus you would have better performance and faster a faster response

    How people treat you is their karma- how you react is yours-Wayne Dyer

  3. #3
    Right turn Clyde Nokia's Avatar
    Join Date
    Aug 2003
    Button Moon
    I would use the default gateway IP and not the ISP DNS.....if the ISP for some reason altered their DNS IP Address (unlikey but possible) you would run into problems and have to update all your clients. Where as the router (as MLF said) would receive the new IP via DHCP.

    Usually when using static IP addresses I almost always still push out DNS settings from a DHCP server to the clients to provide a quick way to update the servers/hosts should an urgent DNS change occur for whatever reason.

    Networks have a habbit of grinding to a halt after a while when DNS goes wrong....
    Drugs have taught an entire generation of kids the metric system.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts