-
May 2nd, 2007, 04:42 PM
#1
Junior Member
A disk read error occurred
My family has a problem with their computer.
When the computer starts up it does the memory test then bleeps once then instead of windows xp loading it displays the message: "a disk read error occurred press ctrl+alt+del to restart.
The computer is just over seven years old and im thinking this might mean a corrupt hard drive.
I know a pc tech who has taken a look at it and advised my sister to run scan disk but apparently this did not fix the problem.
He recommended as it is an old pc just to sell it on ebay which i am thinking of doing you people are my last result.
EDIT: As the computer is old and due to my lack of hardware knowledge i do not want to swap hardware components or replace the hardware.
But i do want to find out what is causing this problem.
Lots of information on this error on google but i cannot find a solution.
Last edited by crowchy; May 2nd, 2007 at 04:57 PM.
-
May 2nd, 2007, 04:56 PM
#2
OK. One beep from the BIOS means that it booted properly. The issue with the OS not loading sounds more like the Master Boot Record and/or the File Allocation Tables.
A question..................how did you run scandisk (actually "checkdisk") without the OS?.................. it is a Windows application................
-
May 2nd, 2007, 05:03 PM
#3
Junior Member
Im not sure how scandisk/checkdisk was run without the OS.
My sister just told me that the pc tech got her into it and told her to watch and see if it displays any errors and if it does to "fix" the errors it finds.
-
May 2nd, 2007, 05:23 PM
#4
It won't find errors in the MBR or FAT, and it certainly won't fix them It is intended to check stuff in the Windows OS filesystem, rather than the bits associated with the hard drive and filesystem management.
You say you are not confident in hardware repairs? OK, how good are you with software? Would you feel confident in downloading stuff and creating a bootable CD or floppy?
Forget about ebay...........................
-
May 2nd, 2007, 05:42 PM
#5
Junior Member
Yes i am confident in software and i have a cd-rw drive and some blank cd-r's.
-
May 2nd, 2007, 09:26 PM
#6
even booting with a dos disk and doing fdisk/mbr might get your drive in order.
reseating the cables power and data another simple fix
ddddc
"Somehow saying I told you so just doesn't cover it" Will Smith in I, Robot
-
May 3rd, 2007, 05:17 PM
#7
A seven-year-old harddrive is pretty old (and probably noisy, too, compared with today's drives!), assuming the computer has been used regularly. If she has any data to salvage, I'd boot from a liveCD, copy the data over to network or other attached storage (perhaps a second drive?) and either replace the drive or, as you noted, sell the computer. Of course, you'll probably want to remove the drive either way. Good modern replacements can be had for less than $0.25 per gigabyte, in some cases.
Edit: Just saw your edit that said you didn't want to swap hardware components. That'll teach me to read more carefully.
In that case, you might be in luck with running some sort of drive fitness test or diagnostics, probably from a liveCD. However, considering the age of the drive, some of your options may be more limited (I doubt you'll be able to run SMART diagnostics, for example).
Even so, I really do feel a drive that old has seen some long duty, and probably won't last forever, regardless. I do hope you're backing up critical data
Last edited by kythe; May 3rd, 2007 at 05:24 PM.
-
May 3rd, 2007, 06:13 PM
#8
You can get a bootable CD with tools here:
http://www.ubcd4win.com/contents.htm
Try booting into the BIOS setup and see what type of hard drive you have, It will be a string of letters and numbers, try putting it into Google and you should find out what make of drive it is.
Go to the manufacturer's website and get their diagnostic and/or repair utility and run that.
Remember, before disposing of it that the drive contains all the private and personal data that has been entered on it. Sell someone a dud computer and I wonder what they might do with that?
-
May 3rd, 2007, 09:44 PM
#9
I like to take my old hard drives to the rifle range when I know a buddy has to sight his rifle in. I use a compound bow and a crossbow, they don't do enough damage. Do you have any idea what a 9mm does to a hard drive?
ddddc
"Somehow saying I told you so just doesn't cover it" Will Smith in I, Robot
-
May 3rd, 2007, 11:36 PM
#10
Nope,
But on a CRT display and a full can of shaving foam the results are pretty impressive
Similar Threads
-
By unvi$ible in forum Hardware
Replies: 9
Last Post: May 16th, 2004, 09:48 PM
-
By Info_Au in forum AntiOnline's General Chit Chat
Replies: 1
Last Post: April 22nd, 2004, 02:17 AM
-
By scoundral in forum Hardware
Replies: 5
Last Post: January 6th, 2004, 04:14 PM
-
By ajit in forum Network Security Discussions
Replies: 9
Last Post: March 25th, 2003, 12:51 PM
-
By s0nIc in forum Other Tutorials Forum
Replies: 4
Last Post: December 20th, 2001, 12:09 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|