Results 1 to 10 of 10

Thread: A disk read error occurred

  1. #1
    Junior Member
    Join Date
    Aug 2006
    Posts
    10

    A disk read error occurred

    My family has a problem with their computer.

    When the computer starts up it does the memory test then bleeps once then instead of windows xp loading it displays the message: "a disk read error occurred press ctrl+alt+del to restart.

    The computer is just over seven years old and im thinking this might mean a corrupt hard drive.

    I know a pc tech who has taken a look at it and advised my sister to run scan disk but apparently this did not fix the problem.

    He recommended as it is an old pc just to sell it on ebay which i am thinking of doing you people are my last result.

    EDIT: As the computer is old and due to my lack of hardware knowledge i do not want to swap hardware components or replace the hardware.

    But i do want to find out what is causing this problem.

    Lots of information on this error on google but i cannot find a solution.
    Last edited by crowchy; May 2nd, 2007 at 04:57 PM.

  2. #2
    Senior Member nihil's Avatar
    Join Date
    Jul 2003
    Location
    United Kingdom: Bridlington
    Posts
    17,188
    OK. One beep from the BIOS means that it booted properly. The issue with the OS not loading sounds more like the Master Boot Record and/or the File Allocation Tables.

    A question..................how did you run scandisk (actually "checkdisk") without the OS?.................. it is a Windows application................

  3. #3
    Junior Member
    Join Date
    Aug 2006
    Posts
    10
    Im not sure how scandisk/checkdisk was run without the OS.

    My sister just told me that the pc tech got her into it and told her to watch and see if it displays any errors and if it does to "fix" the errors it finds.

  4. #4
    Senior Member nihil's Avatar
    Join Date
    Jul 2003
    Location
    United Kingdom: Bridlington
    Posts
    17,188
    It won't find errors in the MBR or FAT, and it certainly won't fix them It is intended to check stuff in the Windows OS filesystem, rather than the bits associated with the hard drive and filesystem management.

    You say you are not confident in hardware repairs? OK, how good are you with software? Would you feel confident in downloading stuff and creating a bootable CD or floppy?

    Forget about ebay...........................

  5. #5
    Junior Member
    Join Date
    Aug 2006
    Posts
    10
    Yes i am confident in software and i have a cd-rw drive and some blank cd-r's.

  6. #6
    Disgruntled Postal Worker fourdc's Avatar
    Join Date
    Jul 2002
    Location
    Vermont, USA
    Posts
    797
    even booting with a dos disk and doing fdisk/mbr might get your drive in order.

    reseating the cables power and data another simple fix
    ddddc

    "Somehow saying I told you so just doesn't cover it" Will Smith in I, Robot

  7. #7
    A seven-year-old harddrive is pretty old (and probably noisy, too, compared with today's drives!), assuming the computer has been used regularly. If she has any data to salvage, I'd boot from a liveCD, copy the data over to network or other attached storage (perhaps a second drive?) and either replace the drive or, as you noted, sell the computer. Of course, you'll probably want to remove the drive either way. Good modern replacements can be had for less than $0.25 per gigabyte, in some cases.

    Edit: Just saw your edit that said you didn't want to swap hardware components. That'll teach me to read more carefully.

    In that case, you might be in luck with running some sort of drive fitness test or diagnostics, probably from a liveCD. However, considering the age of the drive, some of your options may be more limited (I doubt you'll be able to run SMART diagnostics, for example).

    Even so, I really do feel a drive that old has seen some long duty, and probably won't last forever, regardless. I do hope you're backing up critical data
    Last edited by kythe; May 3rd, 2007 at 05:24 PM.

  8. #8
    Senior Member nihil's Avatar
    Join Date
    Jul 2003
    Location
    United Kingdom: Bridlington
    Posts
    17,188
    You can get a bootable CD with tools here:

    http://www.ubcd4win.com/contents.htm

    Try booting into the BIOS setup and see what type of hard drive you have, It will be a string of letters and numbers, try putting it into Google and you should find out what make of drive it is.

    Go to the manufacturer's website and get their diagnostic and/or repair utility and run that.

    Remember, before disposing of it that the drive contains all the private and personal data that has been entered on it. Sell someone a dud computer and I wonder what they might do with that?

  9. #9
    Disgruntled Postal Worker fourdc's Avatar
    Join Date
    Jul 2002
    Location
    Vermont, USA
    Posts
    797
    I like to take my old hard drives to the rifle range when I know a buddy has to sight his rifle in. I use a compound bow and a crossbow, they don't do enough damage. Do you have any idea what a 9mm does to a hard drive?
    ddddc

    "Somehow saying I told you so just doesn't cover it" Will Smith in I, Robot

  10. #10
    Senior Member nihil's Avatar
    Join Date
    Jul 2003
    Location
    United Kingdom: Bridlington
    Posts
    17,188
    Nope,

    But on a CRT display and a full can of shaving foam the results are pretty impressive

Similar Threads

  1. floppy disk can not format disk
    By unvi$ible in forum Hardware
    Replies: 9
    Last Post: May 16th, 2004, 09:48 PM
  2. Disk writing problem (DAT file)
    By Info_Au in forum AntiOnline's General Chit Chat
    Replies: 1
    Last Post: April 22nd, 2004, 02:17 AM
  3. How do i partition a 160GB hard disk
    By scoundral in forum Hardware
    Replies: 5
    Last Post: January 6th, 2004, 04:14 PM
  4. networks and security how to start?
    By ajit in forum Network Security Discussions
    Replies: 9
    Last Post: March 25th, 2003, 12:51 PM
  5. Manually creating a "good" Win95/98 Boot/Utility Disk
    By s0nIc in forum Other Tutorials Forum
    Replies: 4
    Last Post: December 20th, 2001, 12:09 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •