-
May 31st, 2007, 10:00 PM
#1
Windows XP SP2 error & Vista upgrade
Hi all
I am getting a windows error. I would like to paste the screenshot but i cant seem to get it below the size that the site allows you to attach with. How do I do this first of all. I know its a noobie Q
Thanks
K, I haven't got a reply on the attachment part so I am just going to type out the error.
DATA PROTECTION PREVENTION - MS WINDOWS
WINDOWS HAS CLOSED THE PROGRAM
NAME: WINDOWS XPLORER
PUBLISHER: MS CORP
Only option is to close message which then kills my xplorer and asks to send an error report or not. At this point it kills my explorer.
Any suggestions would be appreciated.
Thanks.
Last edited by Cider; May 31st, 2007 at 11:36 PM.
The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it.
Albert Einstein
-
May 31st, 2007, 11:53 PM
#2
OK Cider,
You need to resize your image then zip it.
What version of Windows are we talking here?
What did you do prior to this problem?
Have you tried a "repair" reinstall of Windows?
-
June 1st, 2007, 12:14 AM
#3
sounds like a naughty program that is being prevented from running on your system
West of House
You are standing in an open field west of a white house, with a boarded front door.
There is a small mailbox here.
-
June 1st, 2007, 11:02 AM
#4
Windows Xp SP2. I didnt do much prior to this. All I can think of is putting in new Ram and a new DVD writer. Other thank that not much software related. I will try do a "repair" of XP.
Ill keep you guys posted.
The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it.
Albert Einstein
-
June 1st, 2007, 12:41 PM
#5
Hi Cider,
"A new DVD writer" huh?
Boot into your BIOS, on the "general settings" page (might be called something different?) you should see: Your hard drives, CD/DVD drives and floppy drives.
Try turning off the DMA mode for the DVD writer. If that doesn't work then turn DMA mode off for everything
-
June 1st, 2007, 04:26 PM
#6
I did a repair and it seems to be fine though. Thanks for the suggestions guys.
1 more question. With the virtual memory that you can set, I made my windows partition abit too small so it wont allow me to make it 1.5 and double what my ram is. Would this be a problem. I dont feel like formatting and setting up my drives again.
Thanks.
The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it.
Albert Einstein
-
June 1st, 2007, 04:36 PM
#7
How much memory does your machine have?
You can also put the pagefile on another disk. It doesn't have to be on C:
You can even create multiple pagefiles..
Oliver's Law:
Experience is something you don't get until just after you need it.
-
June 1st, 2007, 05:12 PM
#8
ok, back to problem 1: It is still showing that particular error whenever I search my file system. I.E double click "My computer" and/or right click start > explore. that error pops uo immediately.
Problem 2: I have 2 gig ram, however I only have 200 MB free space on my windows partition. Yes i know I messed it up with sizing.
Sirdice: I know you can make multiple page files but what would be the benefit of it on a drive other than my windows partition which is C:\.
Thanks
The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it.
Albert Einstein
-
June 1st, 2007, 05:18 PM
#9
The more RAM you have the less pagefile you need. There is no absolute rule of thumb or ratio. With a gig of RAM I would set the pagefile to 512Mb as it is hardly likely to be used.
You will know soon enough if there is a problem as Windows will give you "out of memory" messages.
-
June 1st, 2007, 09:53 PM
#10
K, I made multiple page files so that is sorted.
Does anyone have any suggestions on the first problem I posted besides formatting ...
Here is a screen shot.
Thanks.
Here is the error signature...
EventType : BEX P1 : explorer.exe P2 : 6.0.2900.2180 P3 : 41107ece
P4 : unknown P5 : 0.0.0.0 P6 : 00000000 P7 : 03852860
P8 : c0000005 P9 : 00000008
Last edited by Cider; October 25th, 2010 at 01:25 PM.
The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it.
Albert Einstein
Similar Threads
-
By Nokia in forum Tips and Tricks
Replies: 4
Last Post: June 18th, 2004, 04:24 PM
-
By Nokia in forum Tips and Tricks
Replies: 0
Last Post: June 12th, 2004, 05:36 PM
-
By gizmofreak in forum AntiOnline's General Chit Chat
Replies: 2
Last Post: December 7th, 2003, 06:43 PM
-
By Jehnny in forum Other Tutorials Forum
Replies: 1
Last Post: November 15th, 2003, 02:49 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|