CISCO for beginner
Results 1 to 8 of 8

Thread: CISCO for beginner

Hybrid View

  1. #1
    Junior Member
    Join Date
    May 2007
    Posts
    6

    CISCO for beginner

    Hi,

    I just starting reading CCNA book by myself. And I am buying cisco gears,in a couple weeks time. And this is the lists of "my new cisco" for CCNA/CCNP:

    Cisco1720
    1 x Fastethernet port (onboard)
    1 x WIC-1T
    1 x Serial DTE-DCE cross over cable

    Cisco1720
    1 x Fastethernet port (onboard)
    1 x WIC-2T
    1 x Serial DTE-DCE cross over cable

    Cisco2611
    2 x Ethernet ports
    1 x WIC-1T
    1 x Serial DTE-DCE cross over cable

    Cisco2511
    1 x Ethernet port
    2 x Serial ports
    1 x 19" Rack mount kit
    1 x Octal cable (8 x RJ-45 cables) for access to 8 devices

    WS-C2950-24
    24 x 10/100 Fastethernet ports
    1 x 19" Rack mount kit

    WS-C2950-24
    24 x 10/100 Fastethernet ports
    1 x 19" Rack mount kit

    Also comes with:
    6 x Power cables
    2 x AC power adapters (for the 1700s)
    2 x Straight Through cable
    2 x Cross-over patch cable
    1 x AUI Transceiver
    1 x Cisco Console cable


    And I have the picture of my cisco setup netwok will be... as attachment.
    My question is, those cisco gear perfect for my CCNA/CCNP??

    What do you think??
    Attached Images Attached Images

  2. #2
    AO übergeek phishphreek's Avatar
    Join Date
    Jan 2002
    Posts
    4,324
    Holy crap! You're buying all that equipment just for the exam? It seems like a waste to me. Use a simulator. I used this one: http://www.routersim.com/
    Quitmzilla is a firefox extension that gives you stats on how long you have quit smoking, how much money you\'ve saved, how much you haven\'t smoked and recent milestones. Very helpful for people who quit smoking and used to smoke at their computers... Helps out with the urges.

  3. #3
    Senior Member therenegade's Avatar
    Join Date
    Apr 2003
    Posts
    400
    Or try this: http://www.free-labs.com/ . You'll have to register and reserve a timeslot(well in advance since they tend to get filled) but their setup's quite good. Buying all that equipment doesnt seem all that practical.

    Cheers.

  4. #4
    Junior Member
    Join Date
    Jun 2007
    Posts
    1
    or u can use dynamips

  5. #5
    They call me the Hunted foxyloxley's Avatar
    Join Date
    Nov 2003
    Location
    3rd Rock from Sun
    Posts
    2,528
    he sounds more like a Cisco salesman than a student
    I used Ebay to grab my set up for the CCNA
    simulator use was good too, but I like to get my hands on it as it were
    gawd knows what he'd feckin buy if he decides to do MCSE
    55 - I'm fiftyfeckinfive and STILL no wiser,
    OLDER yes
    Beware of Geeks bearing GIF's
    come and waste the day :P at The Taz Zone

  6. #6
    Right turn Clyde Nokia's Avatar
    Join Date
    Aug 2003
    Location
    Button Moon
    Posts
    1,696
    Microsoft!
    Drugs have taught an entire generation of kids the metric system.

    http://tazforum.**********.com/

  7. #7
    Member n00bius's Avatar
    Join Date
    Mar 2005
    Location
    texas
    Posts
    86
    wow...seriously overkill, and a lot of money. you'd be better of saving the money for the exams, retakes if you're not too confident, or a class, which would have a lot of the equipment you'd need lying around, just check for cisco netacademy's hell, i did all fou semesters of the CCNA in high school for free, and at least in Texas its' offer at some community colleges for reasonable prices.

    but a decent CCNA lab would be a 2600 two 2500 (for real cheap ) and a decent switch with a couple of wic2t's. The most expensive thing you should purchase is the switch so you can play with the vlans and trunking protocols. But one thing at a time, get the CCNA before you fiddle with the CCNP so you don't waste money on something that'll be outdated by the time you go for the CCNP.
    ...:::Pure Kn0wledge:::...

  8. #8
    Senior Member mungyun's Avatar
    Join Date
    Apr 2004
    Location
    Illinois
    Posts
    172
    Actually, when i went through my ccna classes they gave us PacketTracer. It is really in-depth software made by Cisco that allows you to simulate a network. From adding PC's, switches, routers, WAN clouds, wireless to actually accessing the IOS in any of the equipment in the simulation and putting commands in yourself, then you can get on one of the PC's in the sim and ping another computer to see if you did it correctly. I really love it.

    Now im not sure if you have to be in the NetAcad or not to get it but I have been able to find it on many other sites online with little searching. If you can get that, I would really recommend it because it would save you loads of cash.

    The newest version they had is 4.0 but it was about 6 months ago when i grabbed it so there might be a newer version.

    Good luck with the quizzes, they can be really tough.
    I believe in making the world safe for our children, but not our children’s children, because I don’t think children should be having sex. -- Jack Handey

Similar Threads

  1. Cisco Security Advisory: Cisco Telnet Denial of Service Vulnerability
    By Spyder32 in forum Miscellaneous Security Discussions
    Replies: 1
    Last Post: May 27th, 2008, 01:17 PM
  2. Port List
    By ThePreacher in forum Miscellaneous Security Discussions
    Replies: 17
    Last Post: December 14th, 2006, 08:37 PM
  3. Cisco ACNS software users!
    By phishphreek in forum Network Security Discussions
    Replies: 0
    Last Post: December 10th, 2003, 07:00 PM
  4. Heads up for the Cisco PIX people
    By Ratman2 in forum Firewall & Honeypot Discussions
    Replies: 0
    Last Post: November 22nd, 2002, 02:17 PM
  5. how to hack cisco a router... wow
    By NUKEM6 in forum Non-Security Archives
    Replies: 1
    Last Post: February 3rd, 2002, 10:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

 Security News

     Patches

       Security Trends

         How-To

           Buying Guides