-
January 9th, 2008, 04:24 AM
#1
Member
Sata and SataII
I am looking into upgrading a friends computer and just recently he purchased a Sata I 500GB drive(don't remember model or brand) and he is wanting to upgrade to a AMD 64 X2 and the board I picked for him supports Sata II. I was wondering if a Sata I HD would work when plugged into a Sata II port?
The answer to all how to questions: Very carefully with a large stick.
\"Dogs f***ed the Pope. No fault of mine.\" Hunter S. Thompson
-
January 9th, 2008, 08:53 AM
#2
Yes, it would work. Not at the Sata-2 speed of course but it'll work..
Oliver's Law:
Experience is something you don't get until just after you need it.
-
January 9th, 2008, 09:17 PM
#3
Sata "1" runs at 1.5gbps (which works out to 150MB/s transfer rate). Sata "2" runs double the speed, 3gbps (which works out to 300MB/s transfer rate). As for why I put "1" and "2" in quotes....although not the best source ever wikipedia puts it in better words than I.
SATA II Misnomer
The 3.0 Gbit/s specification has been very widely referred to as “Serial ATA II” (“SATA II” or “SATA2“), contrary to the wishes of the The Serial ATA International Organization (SATA-IO) which defines the standard.
The term SATA II has grown in popularity, causing great confusion with customers because, quite simply, it’s a misnomer.
The first step toward a better understanding of SATA is to know that SATA II is not the brand name for SATA’s 3Gb/s data transfer rate, but the name of the organization formed to author the SATA specifications. The group has since changed names, to the Serial ATA International Organization, or SATA-IO.
The 3Gb/s capability is just one of many defined by the former SATA II committee, but because it is among the most prominent features, 3Gb/s has become synonymous with SATA II, hence the source of the confusion.
Probably more than you wanted to know. Think about how older EIDE and PATA133 are interchangeable but older stuff isn't as fast. In your case, older stuff should transfer at exactly half the speed.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|