-
February 18th, 2008, 03:48 PM
#1
Member
installing hard disk external case
Hi I recently bought a 3.5HDD USB2.0 to IDE external case (jupiter, lexcron). However I have some problems installing the hard disk to it. I plugged in the power connector and the 40pin cable but the disk isn't detected. Instead my cd-rom (D:\)cannot be read due to I/O error while the usb is plugged in. Can anyone tell me how to install the hard disk into the eternal case? Do I have to do something about the jumper?
Thanks in advance!
-
February 18th, 2008, 04:04 PM
#2
I have moved this into "hardware"
Please check that the jumper on the drive is not set to "master".............. that is a fairly common cause of confusion.
I am not sure why your CD drive is playing up, but it might be because the system isn't sure what the USB drive is.
-
February 18th, 2008, 04:12 PM
#3
And if it is a western digital then take off the jumpers completely to set it to "single"
-
February 18th, 2008, 04:17 PM
#4
Member
what should be the correct jumper configuration then? no jumper because its a slave?
-
February 18th, 2008, 05:31 PM
#5
That would depend on the make and model of drive you have. The various settings should be marked on it.
-
February 18th, 2008, 05:54 PM
#6
Actually you would want to set the jumpers to cable select. I have worked with several brands of these adapters and that is what has always worked for me. I have had this exact same problem when trying to manually set the jumper config and it seems to just go away when you set it to cable select.
All of this is of course assuming that you are using a relatively standard HDD on a windows based system. Not being super familiar with Linux and the way it addresses hardware I could not tell you for certain there. More details would be VERY helpful.
-
February 18th, 2008, 06:00 PM
#7
Member
I have plugged it into 'cable select' and fixed the problem. Thanks for all your advice.
Similar Threads
-
By Riot in forum Other Tutorials Forum
Replies: 15
Last Post: February 28th, 2005, 01:28 AM
-
By gore in forum Operating Systems
Replies: 2
Last Post: February 25th, 2005, 08:12 AM
-
By gore in forum Other Tutorials Forum
Replies: 6
Last Post: October 5th, 2004, 08:26 AM
-
By bharat6666 in forum Hardware
Replies: 2
Last Post: April 1st, 2004, 12:02 PM
-
By MrLinus in forum Other Tutorials Forum
Replies: 3
Last Post: December 10th, 2003, 02:16 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|