May 28th, 2008, 02:37 AM
Extending wi-fi range
I have a wireless network at home, but it's not giving me the expected signal although the distance isn't that long.
Several questions need to be answered :
1- What is the best placement for the router ? For convenience I have it on top of a subwoofer, so I thought that might cause interference, but I wanna know if it REALLY does.
2- How can I change the encryption settings or tweak the router to give a longer range ? I am using WPA2-PSK with AES encryption, and broadcasting on channel 11. I've read that changing the RTS threshold (reducing it) will give a longer range, but I don't know if it will cause any problems.
I also recently enabled "Xpress Technology" which should make it better.
ANY info or tips are appreciated...
May 28th, 2008, 02:50 AM
First let me say that my specialty is wired routing, not wireless.
It goes without saying that you should get the Router as close to your destination as possible. Second, Place the router as close to the center of your range as possible. For example- if you are going to use your entire house, place it in the center. Probably not the best idea to have it close to electronics, as it degrades the signal. You also have the option of purchasing either a second router to act as a repeater, or a antenna extender for your current router. If theres something I wasn't clear on, let me know.
Hope This Helps,
May 28th, 2008, 04:15 AM
What I did, is I made a small "dish" out of cardboard and metal wire-mesh, and stuck it to the antenna on one of my d-link routers. I aimed this "dish" (which looks more like the outside of a loudspeaker) out a window, towards my grandparents' house (which is like only 300ft away). A nice little side effect is that there are rows of pine trees behind my house, and trees in rows make EXCELLENT signal directors if you're aiming a directional antenna down the length of the space between them. The other side of the field where the trees are planted is a good 800ft, and I get a "good" signal there. However, if I move over to the next row of trees, my signal dies. OLSR mesh networking, anyone?
May 28th, 2008, 04:24 AM
Nuk- Would you do a step by step in case he would like to try it?
Okay, so it sounds like a cool little project Id like to try.
May 28th, 2008, 06:29 AM
As far as increasing your signal strength there is a couple things i've heard of but have not been able to try to confirm.
1. put a mirror facing the way you want the signal to go and it should increase the distance a little.
2. you can purchase an exteranl antena for your wireless card.
Or the best thing I've came across is the following link
depending on your router make and version it should be supported. If not you can purchase a $30 dollar router and make it a $200 + dollar router with the features it unlocks in the router (including boosting the wirelss strength)
If you do decide to do this follow the instructions and do exactly what they say. hope that helps
PASSWORD: I dont have one
May 28th, 2008, 08:14 AM
The encryption settings have nothing to do with signal strength..
Have a look at other Wifi in the neighborhood, don't use the same channel try to keep a 2 channel 'distance'.
Experience is something you don't get until just after you need it.
May 28th, 2008, 08:22 PM
Last edited by KorpDeath; May 28th, 2008 at 08:42 PM.
Mankind have a great aversion to intellectual labor; but even supposing knowledge to be easily attainable, more people would be content to be ignorant than would take even a little trouble to acquire it.
- Samuel Johnson
May 29th, 2008, 12:16 AM
Just make sure you don't extend your range all the way to El Paso...
May 30th, 2008, 06:32 PM
You should remove it from the subwoofer.
The magnet & coils will muck up the signal propagation and the ability to receive the return signal.
You could invest in some larger WiFi aerials, either unidirectional or omnidirectional.
This link will give you some ideas:
Although UK based it will point you in the right direction for what to look for.
IT, e-commerce, Retail, Programme & Project Management, EPoS, Supply Chain and Logistic Services. Yorkshire. http://www.bigi.uk.com
May 30th, 2008, 07:04 PM
Don't put stuff on subwoofers. They also emit low frequency vibrations which might mess up the dry (cold) joints.
If you cannot do someone any good: don't do them any harm....
As long as you did this to one of these, the least of my little ones............you did it unto Me.
What profiteth a man if he gains the entire World at the expense of his immortal soul?
By roswell1329 in forum General Programming Questions
Last Post: September 23rd, 2005, 10:43 PM
By phishphreek in forum Wireless Security
Last Post: June 20th, 2005, 01:52 PM
By ShagDevil in forum Wireless Security
Last Post: May 9th, 2005, 04:29 PM
By lostit44 in forum Hardware
Last Post: February 16th, 2005, 07:43 AM
By breakology in forum Other Tutorials Forum
Last Post: August 24th, 2003, 06:30 PM