August 4th, 2011, 07:04 PM
Sanitizing a Storage Area Network (SAN)
I've done a little searching, and I cannot seem to find any products designed to sanitize an entire SAN, or multiple disks in a SAN. I am not very knowledgeable in SANs; I'm only doing research for possible products in sanitizing a SAN.
Are there really any products out there designed to do this?
August 5th, 2011, 11:52 AM
Might not be what you are looking for but this certainly will make it so that data is not recovered: http://www.fas.org/man/dod-101/sys/land/m14-th3.htm
You're not your post count, You're not your avatar or sig, You're not how fast your internet connection is, You are not your processor, hard drive, or graphics card. You're the all-singing, all-dancing crap of AO
09 F9 11 02 9D 74 E3 5B D8 41 56 C5 63 56 88 C0
August 7th, 2011, 04:59 PM
Hi there NukEvil,
I guess it depends on exactly what you mean by "sanitising". When I worked in the WMD sector it meant degaussing (magnetic media) and physical destruction. OK with CD/DVD and tape media acetone then fire......
If you just mean wiping, then a SAN could be a problem if it consists of disparate devices.
You would really need total physical control, and be sure that you got every device, as not all may be connected at any one point in time. This would be an issue even if your objective was just to wipe the data by overwriting.
I believe that there is commercial software (*nix based?) that will analyse networks such as SANs and wipe them, but I have never come across them personally. I have no idea how they would handle the boot issue?
If you have hybrid or SSD devices then all bets are off. That technology is way different from the regular old magnetic drive.
Check out the University of California, as I have seen some papers from them on the subject (of SSDs).
Please remember that a software wipe will only work if the device is functional and fully accessible. Regular magnetic drives are prone to leave recoverable data in areas they have marked as bad. This is even worse with SSDs, as they seem to have far more space allocated for this purpose.
Finally, how can you be sure that you got everything? as I see it SAN + Cloud = when it comes to secure data destruction.
August 10th, 2011, 06:46 AM
One method would be to simply fill each volume on the SAN with a file filled with garbage.
cat /dev/random >> SAN
Delete the file once it fills the volume. This is also how CCleaner wipes free space on a drive. It's simple, effective, and as long as quotas are not enforced does not require special privileges.
Real security doesn't come with an installer.
By dantesheaven in forum Spyware / Adware
Last Post: October 24th, 2004, 01:49 PM
By gore in forum Operating Systems
Last Post: March 7th, 2004, 07:02 AM
By qod in forum The Security Tutorials Forum
Last Post: February 27th, 2004, 02:03 AM
By Noble Hamlet in forum AntiOnline's General Chit Chat
Last Post: March 17th, 2002, 08:38 AM
By Ennis in forum The Security Tutorials Forum
Last Post: November 15th, 2001, 06:42 PM