-
June 24th, 2012, 06:13 PM
#1
best cooling mat for laptop with rear vent
i have an hp laptop with the vent in the rear in staid of bottom im wondering if someone can recommend a good cooling mat for my laptop im one of the lucky ones that can upgrade everything im gonna put a more powerful cpu double the ram to 8gb and put a ssd in as well as put 1tb in the hot swap slot so its gonna give off more heat than it does
-
June 24th, 2012, 07:31 PM
#2
In my opinion, they are all pretty much the same, given that the heat is generated inside the case and they are only cooling the bottom of the outside?
The main advantage to me is that they raise the laptop above the working surface and allow good airflow.
I don't rate the USB ones, as they are using power from the machine and that generates heat. It also drains the battery.
Increasing the RAM doesn't generate heat, only using it does.
Your best move that you have suggested is to replace the HDD with SDD.
Using an external drive as opposed to the hotswap would also reduce power demand and hence heat? Otherwise look at SSD, although I haven't seen 1TB yet, and it is expensive.
-
June 30th, 2012, 06:19 AM
#3
usb hub
Originally Posted by nihil
In my opinion, they are all pretty much the same, given that the heat is generated inside the case and they are only cooling the bottom of the outside?
The main advantage to me is that they raise the laptop above the working surface and allow good airflow.
I don't rate the USB ones, as they are using power from the machine and that generates heat. It also drains the battery.
Increasing the RAM doesn't generate heat, only using it does.
Your best move that you have suggested is to replace the HDD with SDD.
Using an external drive as opposed to the hotswap would also reduce power demand and hence heat? Otherwise look at SSD, although I haven't seen 1TB yet, and it is expensive.
i have a 7 slot powered usb hub i use for powering stuff like my external dvd and such i can just plug the usb cord from fan in there
-
June 30th, 2012, 06:22 AM
#4
Originally Posted by nihil
In my opinion, they are all pretty much the same, given that the heat is generated inside the case and they are only cooling the bottom of the outside?
The main advantage to me is that they raise the laptop above the working surface and allow good airflow.
I don't rate the USB ones, as they are using power from the machine and that generates heat. It also drains the battery.
Increasing the RAM doesn't generate heat, only using it does.
Your best move that you have suggested is to replace the HDD with SDD.
Using an external drive as opposed to the hotswap would also reduce power demand and hence heat? Otherwise look at SSD, although I haven't seen 1TB yet, and it is expensive.
the only problem im having with externals is they are designed soley for backup they arnt geared towards everyday use ive had 3 fail on me that way , thats why i was looking at getting a 1 tb magnetic for the hot swap port and a 200gb ssd for os drive just wanted to clarify i think i was half asleep before again thank you everyone so much for your help just wanted to clarify and share knowledge
-
June 30th, 2012, 09:40 AM
#5
Hmmmm,
I have an external HDD docking station. It measures 5"x3"x3" and will take 3.5" or 2.5" regular internal drives.
About 2/3 of the drive is exposed when mounted, so is at ambient temperature. I could improve things a bit with a small desk fan.
Basically, the enclosed external drives that I have seen don't have any cooling, so aren't really suitable for prolonged use?
I guess I was asleep on my last post as well
Obviously, if you are going to use the 1TB as a regular system drive you want it to perform, and a USB2 connected drive is only going to give you around 30MB/sec.
The hot swap port must offer far better transfer rates than that? but I must admit I have never used one.
I am looking to get a USB3 docking station which has to give me 60MB/sec, and will most likely be 100~200MBps, if external USB3 drives are anything to go by?.............my "fast" machines all have USB3 ports.
Having said all that; if you just buy a 1TB drive and stick it in the hotswap port, just look at the temperatures. If you are having heat problems, you can always then go and buy a docking station and stick the very same drive in that.
-
July 5th, 2012, 10:29 PM
#6
im gonna get a docking station next month along with 2 tb harddrive thank you everyone
-
July 11th, 2012, 03:34 AM
#7
For whatever it's worth; The one I bought has a little "Heat Sink" lol, built into it, and then two fans, keeping the air flow.
Nihil has a point though; Anything you hook up to the machine itself, is going to in general, raise the temp.
And Spec basically said exactly what I do; Take a Vacuum, and just suck it like you owe it money. That way you don't have any dust bunnies. Ohh I made a rhyme! lol.
-
June 24th, 2012, 08:52 PM
#8
Where is the air intake?
Have you blown out the air channels with canned air?
When was the laptop opened up and the dust bunnies and junk cleaned out?
-
March 13th, 2013, 10:56 AM
#9
When Cnet tested cooling pads http://news.cnet.com/8301-17938_105-9700… out of the 8 they checked out, the one without any fans cooled the best http://reviews.cnet.com/docks-stands/xpa… the XPad.
In your case, you *might* want to consider having the unit actually taken apart periodically. Why? Are you familiar with how a clothes dryer works? You know the lint trap? You know how after one use, there is enough lint on that screen to form a layer thick enough to peel off in a single pull? Well... the fan in your laptop sits in front of a heat sink. That heat sink is a piece of copper or aluminum, cut so that there are parallel fins that the fan pushes air between. The leading edge of that heat sink catches debris over time... and the more debris that is caught, the more that *debris* catches even more debris, until you get a layer of material between the fan and the heat sink. This will obviously impede the flow of air in the cooling channel.
This happens to EVERY laptop... and it happens in as little as 2 months in some environmental conditions, and it can take 6 to 8 months to get really bad in other situations. So, I can't tell you how often it will happen to you. What I can say, is that if you have never had that cooling channel cleaned, and the unit is at least a year old, then there *IS* a layer of that dust/debris between the fan and the heat sink within your laptop.
Some laptops have a panel over the fan, where you can simply remove this panel and then you are able to service the fan easily. Other laptops require you to completely disassemble the unit to the point of removing the motherboard to get at the fan and heat sink assembly. I have no idea the make and model of your laptop, so I can't say whether it will be easy or not for you.
What I am saying though, is that before you try chill pads or clip-on fans... you might want to consider simply cleaning the laptop.
Source: http://answers.yahoo.com/question/in...7181656AAQTfNy
-
June 26th, 2012, 10:27 PM
#10
I will go with that, especially for laptops, given the grief you have getting to the entrails of them. On desktops I sometimes use the aircan to blast the crap into the open where I can get to it with the vacuum.............
My best buys in this area are in those "bargain stores" where you can get half a dozen artist's brushes for like $1.5? The thick pig bristle ones are great for cleaning out dust bunnies; all you have to do is use a gentle twisting motion like with a fork and spaghetti or noodles.
So long as its plugged, it won't generate anymore heat than its current state anyway.
If you mean wall socket power then I am totally with you there, and my laptop may have a dud battery anyways, but it does seem to heat up on battery power???
Similar Threads
-
By t34b4g5 in forum General Computer Discussions
Replies: 8
Last Post: October 18th, 2008, 01:54 AM
-
By n01100110 in forum Hardware
Replies: 2
Last Post: December 25th, 2003, 12:58 AM
-
By mandraketux in forum Hardware
Replies: 5
Last Post: November 10th, 2003, 05:37 PM
-
By VictorKaum in forum Other Tutorials Forum
Replies: 17
Last Post: July 26th, 2003, 04:41 PM
-
By avdven in forum AntiOnline's General Chit Chat
Replies: 7
Last Post: July 23rd, 2002, 01:19 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|