October 15th, 2012, 05:06 PM
which color is positive on led
MOBO power sw. Black or red? I have installed the red side to +. Also the other 3 connectors are: LD HDLED,PWRBTN, and RESET.
I also have a 6pin connector lead from the power supply labeled PCI-E that doesn't seem to fit anywhere.
MOBO is ASUS M5A78L-M LX+
October 16th, 2012, 12:40 AM
6 pin, usually for some video cards that require more power.
October 18th, 2012, 05:12 PM
color is led
The first commercial LEDs were commonly used as replacements for incandescent and neon indicator lamps, and in seven-segment displays
March 11th, 2013, 09:18 AM
LED's now more popular in all parties and events. I like its more features and brightness.
March 14th, 2013, 10:34 PM
OK, this thread is 5 months old, but I would like to add a few comments that might help subsequent readers.
The underlying question is about how to wire up a MoBo and PSU.
Over the past few years all the cases that I have bought have had the front panel USB and audio connections as a single block. There is a pin missing from the MoBo and a blank space on the case connector.............it will only fit one way.
The other cables have a white wire and a varied coloured one. The white or common colour is negative or neutral and the coloured one is live or positive.
If you cannot do someone any good: don't do them any harm....
As long as you did this to one of these, the least of my little ones............you did it unto Me.
What profiteth a man if he gains the entire World at the expense of his immortal soul?
February 21st, 2014, 08:42 AM
In my opinion Green or Yellow
April 24th, 2014, 03:42 PM
My choice is green or blue. The last one is better.
October 22nd, 2012, 02:37 PM
And you'll fry the LED. LEDs need to be current controlled. Most standard LEDs require 20mA. Voltage doesn't matter. Also note that a LED is basically a diode, so it'll let current through only one way. Connecting the LED the wrong way around and it won't work. It also doesn't contain a wire that lights up as that would make it an incandescent lightbulb.
Originally Posted by AaronMaxwell
No, instead it simply won't light up.
It isn't like an engine where if you get the connections confused it'll run in reverse...
But the question wasn't about LEDs, it was about switches. And those really don't matter how you connect them.
The PCIe connector is for videocards that require extra power. Mine actually requires 2 of those.
Last edited by SirDice; October 22nd, 2012 at 02:42 PM.
Experience is something you don't get until just after you need it.
By fallenstar in forum Site Feedback/Questions/Suggestions
Last Post: October 9th, 2002, 05:38 AM
By obione1 in forum Site Feedback/Questions/Suggestions
Last Post: June 22nd, 2002, 07:50 PM
By <tr1><14> in forum Roll Call
Last Post: June 14th, 2002, 06:34 PM
By Yellow_Fish in forum AntiOnline's General Chit Chat
Last Post: June 11th, 2002, 07:32 PM
By rcgreen in forum Newbie Security Questions
Last Post: March 17th, 2002, 02:16 AM