-
July 8th, 2013, 05:07 AM
#11
which card? Make and model please post.
-
July 8th, 2013, 05:23 AM
#12
The graphics card is: xfx hd 645x zqh2
the new mobo is: fm2 a55m e33
cpu: a6 5400k
I specifically asked the guy if this mobo and cpu would work with my graphics card and he says "oh sure" :|
Please see the attached pictures I took
photo 1.jpgphoto 2.jpgphoto 3.jpgphoto 4.jpg
see the blue and black lines in Photo 1
photo 2 is when I choose the start windows normally option. I mean if I wanna go to the usual account not safe mode or other stuff, this is the error that happens
First time I reinstalled os, I was obviously in the normal account (not safe mode). so I installed everything in the mobo dvd. Then I restarted and after that I was unable to install the xfx dvd drivers saying "failed to load detection driver". (so you realize that I was able to use the normal account once before restart). I would get this "failed to.." error in the safe modes ...
Then I tried to reinstall the os again. This time when I was in the normal account after re-installation, I installed the xfx dvd first and then restarted and as you can guess, was unable to use the normal account anymore so now the mobo drivers are not installed (but what's the difference? sigh). and although apparently I installed the xfx driver right after installation of windows, I still get the photo 4 errors (can't remember what I was doing that it gave me this error! maybe I right clicked on the desktop and chose AMD graphics option to see if I can change anything ....)
People say (on forums) that this "failed to .." error is caused in the safe modes. I tried low resolution option but the blue page (photo 2) is what I got and again, I'm not able to use start windows normally ...
Thanks for your attention Shay
Last edited by boyboy400; July 8th, 2013 at 05:27 AM.
-
July 9th, 2013, 01:09 AM
#13
XFX HD-645X-ZQH2 Radeon HD 6450 is the card.
So get the correct driver for your OS here
http://support.amd.com/us/Pages/drivers.aspx
-
July 9th, 2013, 01:21 AM
#14
Shay the OS I installed is the one I had from the beginning. I have the original DVD for the card drivers. It gives me errors when I try to install the driver! I cannot go to the normal mode and when I'm in the safe mode it says "failed to load detection driver"...
I'll give it another shot tonight but I'm not optimistic. spent a long time yesterday trying to install the drivers with no success
-
July 9th, 2013, 11:50 PM
#15
Figured you were using the cd and is why I got the link.
-
July 10th, 2013, 12:09 AM
#16
Actually again I wasn't able to turn on the computer last night ....
I showed it to some more pro computer repair guys ... they tested the power supply again and told me it wasn't fine :|
He changed the PS but still no graphics .. then removed the graphics card and it was fine so concluded the graphics had problems too ... sigh
so although the PS and graphics card have both warranty but I bought a new PS and decided I was going to be fine with only mobo graphics for a while ...
I'll try to set up the PS tonight and hopefully there will be no problems any more ...
Thanks again
-
July 10th, 2013, 05:48 AM
#17
-
July 10th, 2013, 05:45 PM
#18
JpWr2: AtX 4-pin power Connector
this connector provides 2V power to the Cpu.
Check the manual for to see where the neg terminal is and look at the connector.
You want pin 3 [black] 4- 6 [yellow]
http://pcsupport.about.com/od/inside...in-12v-psu.htm
-
July 11th, 2013, 04:46 AM
#19
-
July 11th, 2013, 05:45 PM
#20
Glad to read the good news. That MSI board should be good for a good number of years. Have gotten 10 years with 5 of them.
Similar Threads
-
By alconovica in forum Operating Systems
Replies: 4
Last Post: June 24th, 2004, 10:37 PM
-
By JohnHACK in forum Miscellaneous Security Discussions
Replies: 9
Last Post: June 9th, 2003, 08:15 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|