Clearing CMOS
Results 1 to 3 of 3

Thread: Clearing CMOS

  1. #1
    Senior Member n01100110's Avatar
    Join Date
    Jan 2002
    Posts
    352

    Clearing CMOS

    Hey folks. I've been having an issue with a new box I just bought. I wanted to make posting here the very last thing that I would do, because I've tried everything else and have been working on this problem for a few days now.

    I bought a Dell Optiplex GX 620 off ebay for fairly cheap just to play around with. When it arrived, I noticed it included a DVI card, and the VGA motherboard slot had been capped off with a piece of factory plastic, which tells me that port has never been used. I don't currently have a monitor in the house that supports DVI, so I got under the hood, and attempted to clear the CMOS. (First time ever doing it) . I'm not so sure I understand the jumper settings, or how to clear the CMOS with the jumpers, even after alot of attempts on watching youtube videos, and googling.

    Also, I removed the CMOS battery, and let it sit for a long time. Upon replacing it, I still have no video.

    Am I missing something ?
    "Serenity is not the absence of conflict, but the ability to cope with it."

  2. #2
    Super Moderator
    Join Date
    May 2012
    Posts
    391

  3. #3
    Junior Member
    Join Date
    May 2014
    Location
    Poland
    Posts
    19
    Or, if you havent't bought an adapter:
    1. Locate the password (PSWD) and CMOS (RTC_RST) jumpers on the system board.
    2. Remove the password jumper plug from its pins.
    3. Place the password jumper plug on the RTC_RST pins and wait approximately 5 seconds.
    4. Remove the jumper plug from the RTC_RST pins and place it back on the password pins.
    5. CMOS cleared!

Similar Threads

  1. Clearing the registry
    By Cider in forum Newbie Security Questions
    Replies: 25
    Last Post: December 8th, 2007, 10:36 AM
  2. Site Subscriptions - Clearing ...
    By Simple Simon in forum Site Feedback/Questions/Suggestions
    Replies: 3
    Last Post: January 4th, 2005, 10:52 PM
  3. Clearing the CMOS using DOS
    By Alterk0de in forum Newbie Security Questions
    Replies: 8
    Last Post: July 20th, 2004, 08:00 AM
  4. Clearing the pagefile
    By J_A_C_K_S in forum Microsoft Security Discussions
    Replies: 5
    Last Post: February 10th, 2003, 05:26 PM
  5. Clearing Recent Searchs
    By jaguar291 in forum Newbie Security Questions
    Replies: 10
    Last Post: August 12th, 2002, 04:20 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •