-
June 3rd, 2015, 02:29 PM
#1
Junior Member
Slow response during HP printer management via browser
My Color Laserjet 5550dtn suddenly lost its network capability - as shown by disappearance of network address in the printer display panel. I replaced the jetdirect 615n card, and I was then able to access the I/O setup again and set the printer's address to what it was before ( 192.168.1.106 )
The printer seems to be working OK, but when I try to access the printer via my browser using its address, the screens DO appear, but after a very long delay - sometimes up to two or three minutes. Similar delays occur each time I change the tab being accessed.
I have set the mask to 255.255.255.0 and the DNS server to 192.168.1.1 (the address of the system router) and have turned off other protocols except TCP/IP.
I cannot remember the exact settings I had before, so is there anything else I may have missed that is causing this extremely slow response ?
Any help would be much appreciated
-
June 3rd, 2015, 11:26 PM
#2
It the IP for the printer one that is effected by the lease time?
You do not want that to happen.
-
June 4th, 2015, 03:55 PM
#3
Try a different DNS server like Google's:
8.8.8.8
or OpenDNS's:
208.67.222.222
-
June 7th, 2015, 10:29 AM
#4
Ping times normal? Less than 2ms? Should be <1ms most of the time on a small LAN.
How does it act when accessing port 80 from another PC? Same slow response?
“Everybody is ignorant, only on different subjects.” — Will Rogers
Similar Threads
-
By PopFly in forum Spyware / Adware
Replies: 5
Last Post: September 2nd, 2008, 07:24 AM
-
By t2k2 in forum Newbie Security Questions
Replies: 5
Last Post: September 10th, 2002, 08:58 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|