Linux Firewire disk

Printable View

June 1st, 2003, 12:46 PM
the_JinX

Linux Firewire disk

Heey all,

I seem to have trouble gettinng my 250Gb firewire disk (Maxtor 5000XT) to work on linux (slackware 9) on my laptop..

lspci tells me it's a:

Code:

02:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)

firewire ccontroller, but I can't seem to load the module..

if I look at dmesg tells me:

Code:

PCI: Found IRQ 11 for device 02:07.0 ohci1394_0: Remapped memory spaces reg 0xe4968800 ohci1394_0: Soft reset finished ohci1394_0: Iso contexts reg: 000000a8 implemented: ffffffff ohci1394_0: 32 iso receive contexts available ohci1394_0: Iso contexts reg: 00000098 implemented: ffffffff ohci1394_0: 32 iso transmit contexts available ohci1394_0: No IR DMA context available ohci1394_0: Freeing dma_rcv_ctx 0 ohci1394_0: Runaway loop while stopping context... ohci1394: Failed to allocate IR context ohci1394_0: Freeing dma_rcv_ctx 0 ohci1394_0: Runaway loop while stopping context... ohci1394_0: Freeing dma_rcv_ctx 0 ohci1394_0: Runaway loop while stopping context... ohci1394_0: Freeing dma_trm_ctx 0 ohci1394_0: Runaway loop while stopping context... ohci1394_0: Freeing dma_trm_ctx 1 ohci1394_0: Runaway loop while stopping context... ohci1394: $Rev: 578 $ Ben Collins <[email protected]>

aboutt 10 times..

and I can't seem to be gettting anything to work..

Anybody with an idea ??
June 2nd, 2003, 10:47 AM
sweet_angel

Re: Linux Firewire disk

Quote:

Originally posted here by the_JinX

ohci1394_0: No IR DMA context available

Heeya the_JinX,

Look like you have problem with your DMA. Have you play around with hdparm to change your DMA?.

What happen when you do :
# hdparm /dev/hda

And then you should see something like this:
using_dma=0 (off)
Try to turn it on to =1 using hdparm command.

This is just my opinion..I could be wrong.

Hope this helps

Annya
June 2nd, 2003, 11:09 AM
slarty

sweet_angel:

hdparm has nothing to do with firewire. hdparm is for setting up (mostly) IDE discs. The dma option does not have any effect and is not implemented on non-IDE discs.

To the best of my knowledge, assuming the kernel can set the adapter up right (which I suspect in this case it can't), then a firewire HD should appear as if it were a SCSI one, hence be /dev/sda or whatever.

Yes, the problem is related to DMAs, but hdparm cannot help. hdparm does not affect the DMA on any non-ATAPI device. Most devices like SCSI, firewire controllers should always use DMA.
June 2nd, 2003, 11:33 AM
sweet_angel

Quote:

Originally posted here by slarty
sweet_angel:

hdparm has nothing to do with firewire. hdparm is for setting up (mostly) IDE discs. The dma option does not have any effect and is not implemented on non-IDE discs.

To the best of my knowledge, assuming the kernel can set the adapter up right (which I suspect in this case it can't), then a firewire HD should appear as if it were a SCSI one, hence be /dev/sda or whatever.

Yes, the problem is related to DMAs, but hdparm cannot help. hdparm does not affect the DMA on any non-ATAPI device. Most devices like SCSI, firewire controllers should always use DMA.

Thanks Slarty..I could be wrong for that..just my opinion though :) and actually I have second opinion:

Try to rebuild kernel or try using different kernel and look at "firewire section" (you need to enable it) and should be look like this :
"IEEE 1394 support -> IEEE 1394" - required by OHCI1394
"IEEE 1394 support -> OHCI 1394" - required by SBP-2
"IEEE 1394 support -> SBP-2 support" - driver for hard drives, CD-ROMs, DVDs, and so on.
and BTW this in on my laptop

Cheers
June 2nd, 2003, 12:15 PM
the_JinX

Yeah,, I have added all of them..

but I found this..

http://www.linux1394.org/cgi-bin/view_device.cgi?id=503

it seems to be a toshiba 5100 (mine is a 5100-603) problem..

they are working on it...
June 2nd, 2003, 12:32 PM
sweet_angel

Quote:

Not working with kernels of recent distributions (redhat 9.0, mandrake 9.1). Not working after updating these kernels.
more information:
http://sourceforge.net/tracker/index...52&atid=202252

So they have problem with latest kernel on RH 9,Mandrake 9.1. Have you try use old kernel or maybe try install slackware 8.1, let's see what happen..
June 2nd, 2003, 02:58 PM
the_JinX

Yeah.. I might just try a 2.4.18 kernel..
or combining kernel sources (old firewire drivers, new kernel)..
I'm gonna go and try some later tonight..

Luckily it doesn't have to be operational before august 15th
June 3rd, 2003, 05:19 AM
diabhal

Firewire device

Hello:

log on as root in your terminal window and type modprobe ohci1394, hit enter, then type modprobe sbp2 and hit enter. This should load the drivers for Firewire devices. If it is your only Firewire device it should be identified as /dev/sda1. Make sure to have user permissions to it and mount it to another directory name if possible. Also, make sure this device is listed in your /etc/fstab and etc/mtab as well. This helped me with my SuSE box.

Good Luck
June 3rd, 2003, 08:12 AM
the_JinX

as I stated before the loading of the ohci1394 module is the problem..

It is autodetected by my hotplug susbsystem when I use the usb connector and that works but is slow (1mb/s).

It is also autodetected when I use the firewire, but then it gives the same as above

ohci1394_0: Runaway loop while stopping context...

but it does indeed seem to work on the 2.4.18 kernel, so I'll be doing some merging asap..