Printable View
hmm well they are all AMD Processors
i have no DHCP server, but i manually set the ip's and they worked (i could contact the internet)
//edit:
note i didn't try to crack anything, i just opened openmosixviewer and there was nothing there :S, did it miss any options i needed to set ? or am i just acting like a retard ;)
Put up a DHCP server...it makes life a whole lot easier. The problem you're having is that when clusterKnoppix boots, it first tries to get an address, then it joins itself to the cluster. Because you are assigning an IP afterward, it never tries to join the cluster. Im not sure what the openMosix command is to join it to the cluster. If you put up a DHCP server, it'll work...I gaurantee it!
*edit* The best way to do it would be to configure a DHCP server on one of your cluster nodes
-NeuTron
I manage to boot the clusterknoppix, but how do i run cisilia?
No forget it.... I didn't read the post very well.
And to the one which had some questions about getting the hashes, you can use NTFSDOS Professional. Here's the link.
Now, extract the archives to each diskette. Archive 1, to diskette number one (remember to format disk 1 as a ms-dos bootdisk) and archive 2 to diskette number two. Then put in disk1 in the target machine's floppy and boot. When you have booted the diskette, type "ntfspro" in the dos window and follow the short instructions. Then type C: and after that; "cd windows\system32\config". ("cd winnt\system32\config" if you have win2k.)
Now you should be in the config folder. Now type "copy sam A:"
The SAM should now be on your diskette. (if the sam is syskeyed you want the system file to though it's too big for a diskette, you'll have to copy it on a usb pen or something like that. It WILL NOT work to copy it directly to the disk.)
When your in windows again, put in your diskette and copy the sam over to a more secure place so you where you won't lose it. You'll never know.
If the sam is syskeyed then download SamInside 2.2.6.0 full version, load the sam and the system file, and then extract the hashes to a file. Now you have unlocked the sam!
msg me if you need help with the sam file.
I have a seriously problem; When i boot clusterknoppix and open the mosixview panel, there are no nodes there. :S
Yes i have a DHCP server on the network, and i have set to recieve IP adress automatically.
Can someone help me?
I need more information about your setup before I can help you. PM when you get a chance and we can discuss it on IRC because I hate writing long posts :)Quote:
Originally posted here by NtrlZr
I have a seriously problem; When i boot clusterknoppix and open the mosixview panel, there are no nodes there. :S
Yes i have a DHCP server on the network, and i have set to recieve IP adress automatically.
Can someone help me?
-NeuTron
I have Cluster Knoppix up and running on 4 machines. Everything works great, except I can't give Cisilia more than 9 threads. 10 or greater causes it to fail. With 9 processes, all of my machines are only running at about 70%. Any suggestions?
You only want to load one process per processor. Each process tries to take 100% of the processor, so loading more than one per machine doesnt make sense. I know this is contrary to my tutorial but Ive learned a little more about this since then.
Well after a few spindles of cd's and a 200 box cluster (Thanks local junior college), This cracks the passwords before my I-pod will play a mp3. Thanks.