is my box too old for linux?

so i dug up the old-school machine that i want to put linux on, and everyone says that its great for older slower machines. BUT, is there a limit to that? the machine i want to use is a pentium, a blazing fast 75mhz!! with like 16mg RAM...and a huge 500 mg hard drive. now know that its too old for any new linux (ie redhat 7.3 which i just finished downloading) but it was running win95 just fine and was good when it was on dial-up modem for email etc...
i would like to practice some networking and have linux on the old machine networked to my 1.8ghz 512RAM 80gig hD and cable modem...what can i do/should i do...any advice? should i just trash the old box and find something a little bit newer or can i make this work with a different linux OS?
thanks
LeadBelly

Well you are somewhat off there. The problem is tha redhat will want to give you all kinds of extras, like KDE etc. If you truly want linux, you can get a small compact linux distrobution, like from slackware, you can get zipslack, it is only 25 megs or something like that, and once you unzip it you can run it along with windows. And if you want to, you can download x-windows for it as well. If you can do without all the extras most linux distros will try to give you, then you can easily run linux on your machine.

well i am certainly no guru on the subject..as i have yet to get my copy of redhat to install on my comp, but from reading my book i can say a full install with everything in redhat 7.2 is like 2 1/2 gigs (or around that) so i am guessing 7.3 wouldnt be that far off..
good luck man.
p.s. i am envious of your newer comp..mine is just a little p2 350 mhz

I'm running my Caldera OpenLinux on a 75mhz processor, 16 mb RAM, and a 750 meg HDD. Only trouble I came across was some of the bulk that is installed, but that can easily be fixed by doing a "custom" install and deciding not to install certain things that you don't necessarilly need. It worked for me, and if you can't get it down to 500 megs, I'd be happy to sell you another 500 meg HDD for really cheap that you can put to it to help you install it. Good luck.

It is not too small for a *nix like environment. You should be able to run PicoBSD with some ease. You can check it out here
It's not really a distro of Linux, but one of the BSD's. If I am not mistaken, it can be run from 1 floppy disk, and your additional packages can be insalled and run from the main HDD, even if it is only 500MB. From what I understand, this OS was packaged for BSD fans that were running laptops that didn't have much for HDD's, so it shoudl work out for you.

Regards.

You could always just go with an older distro of a large-name company (such as Red Hat). I had some older versions of Red Hat running on some 486s and 90 MHz and less Pentiums before I decided to scrap them.

AJ

A few months ago I installed Redhat 7.2 on a 66mHz 486 with 16MB RAM and a 300MB HD. It took a few goes tinkering around with all the partitions but I managed to get it working and it ran ok. Of course this was a very basic install with pretty much just the core packages. No pretty GUI's or anything but it would work fine as a baby server or just for messing around with.

I have a 486-66 with 32 megs ram and 450 meg hard drive
running red hat 6.0. There isn't enough hard drive space
for the X window system though. I have a 486-80 32 megs ram 1.2 gig HD
and it runs redhat 6.0 with X window system.
and i have a 486-66 with 24 megs ram and 8 gig hard drive, and
it dual boots win98 and redhat 5.2

You may not be happy with the video on older machines.
They sometimes can't give you high enough screen resolution
for a good experience with the GUI (X window system)
If you are satisfied with text mode, your box is more than
adequate, although I'd try to scrounge some more ram
and a bigger (or second) hard drive if I could get it cheap.
:cool:

You CAN install RH 7.3 on that machine. You just limit what you install. You don't want/need an X server or client (no KDE/Gnome/etc or any gui environment). Also, when you install, only install the packages you want. You don't need to install desktop publishing, photo editing, etc type software. Only install the network and development packages, and you will be doing good.
Thats 1 nice thing about linux. You only have to install what you want to, not what the company wants you to.

I've got RH 6 on my Tosh2150CD laptop (486, 20mb RAM). HDD is 2.0gigs, partitioned 50/50 to let me dual-boot to Windoze95 osr2.
How sad am i? (rhetorical question -- I already *know* how sad I am, thanks!)

well i know its sad but i have never even SEEN a linux system in action....i know i know iknow total newbie right... well i just want to learn some stuff you know... im getting a linksys router and i need a ethernet card for the older box....and then i guess i should be set.... i dont know exactly what im going to do... i mean when its all set up... there isnt really a purpose to the maddness...maybe to let my girlfriend use one while i use the other...i dont know really...it was just kinda an idea i had because everyone is always talking about linux i thought i would give it a try...also the networking..get some experience with that...if anyone has some practical ideas/uses for doing this let me know.
thanks
LeadBelly

Are you guys all horny for rh? Come one, sure it is nice, but it would be nicer by far, to get something more than just the core packages. TRY ZIPSLACK!!!!!!!!!!!!! get it at http://www.slackware.com it also runs WITH windows, does not try to take over your partition. I am a big fan of slackware, because of their forum support, as well as their zipslack and bigslack ease of install. All you have to do is unzip, and configure it to mount, which shouldn't take long, and BOOM. You have your own linux distro, not the best distro ever, but you can download all kinds of extra packages, like x-windows. Or you can get bigslack which is the same except it comes with most of those packages already in the file. GET IT NOW!!

I have installed many old boxes with linux.I think with KDE i got it down to less then 300mb but mandrake 8.2 min install is like 20mb or something like that.Hello command line