ok i installed slack and logged in, selected a win manager then "startx" but i get a fatal server error as follows: "screens not found." can anyone offer a remedy for this? TIA!
Printable View
ok i installed slack and logged in, selected a win manager then "startx" but i get a fatal server error as follows: "screens not found." can anyone offer a remedy for this? TIA!
What version of X did it install? I had the same error for a pretty substantial amount of time when I didn't have it configured correctly for my hardware.
What I would recommend is as follows : (if you have version 4.2.0 or later, then jump to step 3)
1. get the latest version of X. See the details on the latest releases http://www.xfree86.org. It is free for download at many locations. I have always had good luck on the mirror ftp.rge.com. [you are likely to be asking why get the latest version, and I say because it is easier to configure. You'll see in a bit.]
2. once you have the latest version, run "sh ./Xinstall.sh" and install the software as needed.
3. once the software has installed, you will want to run "XFree86 -configure" and this will create the file /root/XF86Conf.new and you merely need to move it to the correct location for your system. (This is the reason I recommend getting the latest version, it will probe and configure for system and you can move the file to whatever location it belongs.)
4. Ensure you have the file $home/.xinitrc and that it points to your window manager of choice. Sample of mine is as follows :
I believe the commonly used lines for the file are gnome-session or startkde for Gnome and KDE respectively.Code:exec enlightenment
Hope this helps and best of luck.
Regards.
[edit]
I should let you know that the commands and locations of files vary based on distro and *nix variation. Most of the information I have provided is more oriented to the BSD's, but all the concepts are the same with minor modifications. I believe that this is likely to be of value to you as well. ProblemChild provides some Linux distro specific details.
It sounds suspiciously like X hasn't been configured for your adapter and monitor yet. Have you run xf86config or another setup tool?
Check and see that /etc/X11/XF86Config is in place and properly configured. If it isn't, that's your problem and xf86config will take care of it.
Chefer:well i checked and slack 8.1 has the latest distro for x but i followed the instructions and still no such luck. however a wealth of gratitude is extended to you for the commands i needed those.
problemchild: yes several times i have run xf86config. the odd thing is i cant get to /etc/X11/XF86config. i get a "permission denied" prompt.
nonettheless im gonna be at it all night so feel free to drop a line here netime cuz ill be here!
If you've got "permission denied" when you turn on your slack..do like what I've done to my slack 8.1(maybe works for you)
Login : root
Password:
untill you've got #<< and then # vi /etc/X11/XF86Config
You will see your X configuration and look at your "input device for mouse " ...find protocol "(name of mouse)"<<< changed to "auto".
check your video card configuration ..if you already got the right one..
go to section "screen":
Identifier " A"
Device "B"
Monitor "monitor"
DefaultColorDepth 24<<<<,I added this line
and the the last thing go to subsection "Display":
Depth 24
Modes "1024x768"<<<< I edit to this line
That's it just typed :wq to save your edit
and then typed startx
That's works for my slack 8.1...Hope this helps..
Upss sorry BTW I'm not using slack any more :)
Which user are you working as when you get the error? Can you start X as root but not as a user? If so, it could be a permissions problem on your /tmp directory or something. That happened to me one time, and I just about pulled my hair out trying to figure it out.
I 've reinstall again my slack ware and try to follow what I've done ..Ithink will work for you :
Login : root
Password:
untill you've got #<< and then # vi /etc/X11/XF86Config
You will see your X configuration and look at your "input device for mouse " ...find protocol "(name of mouse)"<<< changed to "auto".
check your video card configuration ..if you already got the right one..
go to section "screen":
Identifier " A"
Device "B"
Monitor "monitor"
DefaultColorDepth 24<<<<,I added this line
and the the last thing go to subsection "Display":
Depth 24
Modes "1024x768"<<<< I edit to this line
That's it just typed :wq to save your edit
# cp XF86Config.new /etc/X11/XF86Config <<<I forgot this one and then "enter'
# startx
And you will see your slack ;)
cheerss
ohh BTW you can edit your "display modes" from 1024x768 to 800x600 or 640x480 ..you can try it..
Why not just as problemchild said, (as root) run xf86config the setup script will ask you some questions about your input (mouse and keyboard) and output (videocard and monitor) hardware and setup the /etc/X11/XF86Config file for you !!
then running startx should get you up and running,
running kdm starts the standard KDE login manager, you can also add /opt/kde/bin/kdm to your /etc/rc.d/rc.local wich is the last script ran at boot time, then you box starts with a graphical login screen :)
hope it helps
yupe ... That's what I wrote typed as "root" on the beginning of my replied..(I've got same problem and my problem solved)
I've got same problem as "word"<<<< error ..screen not found..even I run as root and run xf86conf but after I edit my xf86con like what I wrote... when I typed startx my slack turn up nicely..
hey sweet, um i made those changes but how do i leave that screen, save my changes, and get back to #?
I think this is the part your looking for.Quote:
Originally posted here by sweet_angel
That's it just typed :wq to save your edit
# cp XF86Config.new /etc/X11/XF86Config <<<I forgot this one and then "enter'
# startx
And you will see your slack ;)
cheerss
ohh BTW you can edit your "display modes" from 1024x768 to 800x600 or 640x480 ..you can try it..
Cheers:
DJM it's right..just typed :wq and then enter you will see # and then typed startx
You wil see your slack... cause I tried to install again my slack to help you out and work for me...using this trick ..( I've tried to two computers and they have same error problem "screen not found)
cheeerss
check if your video card is supported by your version of xf86. i've had this problem with RedHat 7.3, and nothing helped. I just changed my video card, cause at that time ther wasn't an update of xf86. Good luck!
have you edit it word?? if still not working you need to edit again this part of my small tutorial :
-You will see your X configuration and look at your "input device for mouse " ...find protocol "(name of mouse)"<<< changed to "auto" if "auto" not working... edit again back to name of "protocol mouse" before you changed to "auto" I meant.. back to the name for the first time you have.
-and the the last thing go to subsection "Display":
Depth 24
Modes "1024x768"<<<< I edit to this line
And for this part you will see Depth 1
Modes "1024x768"<<<< added this line
Depth 8
Modes "1024x768"<<<< added this line
Depth 16
Modes "1024x768"<<<<added this line
Depth 24
Modes "1024x768"<<<<, added this line
That's it just typed :wq to save your edit
# cp XF86Config.new /etc/X11/XF86Config <<<I forgot this one and then "enter'
# startx
I think that's will work for you... can you please let me know ..thanks