Printable View
I have 2 computers hooked up to a router which is hooked up to a dsl line. I know there is a way to share the files on the computer hard drives so you can access one file from both computers. Or atleast i think there is a way to do it. But if there is how do you do it?
What OS. If winXP just setup a home office network. You will need to make both computers a member of the same workgroup when you set it up. Just type in HOME for both on the workgroup, or whatever you want really. But the OS would really help us help you. Most OS's have stuff for this built in, or at least you can download it. You can get samba if on linux. Or just use an ftpserver.
Just go to my network places in winXP and there should be a link on the left to setup a network. If not, just right click my network places and go to properties. Do the same for your LAN connection. Then go to the advanced tab and at the bottom there will be a link called "Network Setup Wizard" and just run through that remembering to use the same workgroup. Good luck.
Oh and when you do get sharing turned on, just right click the folder you want to share and go to Sharing and Security... then share it. You'll probably not want to make it writeable, but you might. Just make sure you're behind a firewall if you do make it writeable.
One thing about the firewall. You'll probably have to add your network IP range to the trusted zone on your firewall so your inside computers can see the shares. Otherwise, you'll spend countless hours trying to figure out why you can't see your shared computers. lol
I have windows 2000 pro and windows 98. I dont know if having two differnt OSs will be a problem.
Shouldn't be a problem at all. I think win2000 pro is similar to winXP pro, and I have a network of 3 winXP pro boxes, one win98se box, a winXP home box, and a redhat 9 box with samba. And they all can see each other fine. As cheyenne said, if they aren't seeing each other, check your firewall config and make sure you allow traffic from the correct ip's.
You should be able to run the network setup wizard in win2000 pro, although I've never used that OS, and when you finish on one computer, it will ask you to put in the disk and run it on the other computer. Do that, and make sure you put the same workgroup for both. You may have to reboot. I could be completely wrong as I've never used win2000. But give it a shot. Just fool around with it for a while, it will work eventually.
You don't have to be in the same workgroup to share files over a network in windows. You can access computers in other workgroups yust as well.Quote:
What OS. If winXP just setup a home office network. You will need to make both computers a member of the same workgroup when you set it up. Just type in HOME for both on the workgroup, or whatever you want really. But the OS would really help us help you
Now for a small guide to share files over your windows network using a windows 2000 or xp pc.
***********
Step 1. Installing file and printer sharing.
on your desktop rightclick on "my network connections" and choose property's. Now rightclick on "Lan-connection" or wathever it is called. select properties again.
Look for an entry called "File and printer sharing....." if it's there go to Step 2.
If it's not click install and double click on client choose file and "printer sharing". Press OK
close the remaining dialogs.
***********
Step 2. Sharing a folder.
Now on your desktop(or anywhere you prefer) create a folder called test and put some useless files in it.
Open up the properties dialog for this folder.
Now this is were xp and 2000 deviate a bit.
Under xp go to the tab sharing. you have 2 options using a wizard or doing stuff manually. I will
let you chose wat you like.
Under 2000 go to the tab sharing and change the radio button. Select a name and description for the shared folder and have a look at the right and permission of the folder.
***********
Step 3. Retreiving a file.
Go to the second computer and perform step 1. On it
Now go to my network places. Search for computers in workgroups. If the computer with the sared file is in the same workgroup simply doubel click on the computer fill in the password and retrieve the file.
If the computer is in a different workgroup press windows network and double click on the correct workgroup to find the computer with the shared folder.
There you go this should get you a long way.
thanks guys ill give it a try.
In win xp when you create a network connection that is used both for file sharing and internet through a router it shows a warning describing that:this kind of network connection is not secure enough because someone malicious can access your local lan throught this connection.anyone knows a more secure wayto connect two pc's with one network card each to share files and have internet in win xp?
teodoros: Disable File and Printer sharing on the interface that's connected to the Internet and switch on ICF.
Edit: Ooops. You seem to have a router that connects you to the Internet right? That router uses NAT so you should be safe.
um - SirDice in answer to teodoros above you saidQuote:
In win xp when you create a network connection that is used both for file sharing and internet through a router
if I've understood the question correctly - using your suggestion he wouldn't be able to share his resources across the network - since he's apparently behind a router this sort of defeats the purpose of the router..... unless teodoros is using the one computer as a gateway?Quote:
Disable File and Printer sharing on the interface that's connected to the Internet and switch on ICF.
Teo can you clarify what your set up is... is it something like
internet > router > LAN (consisting of several computers) OR is it
internet > main computer acting as a gateway > LAN
If it's the first then you should be ok (although TBH I don't recall that kind of warning when I set mine up like the first option)
If it's the second option (which I'm beginning to suspect it is) then whilst SirDice suggestion would make you safer it won't let you share files etc. The only other way I know of doing it would be to using a protocol other than TCP/IP e.g using IPX/SPX to share files/printers etc
Z
[edit] heh SirDice you've just beat me too it :)
Yeah. Read to fast ;) If he had 2 NICs and used ICS then my first answer would be right.Quote:
my set up is:
internet > router(with nat) > LAN (consisting of several computers)
but win xp claims (at this warning that i am refering to )that having a gateway is a better solution.
teodoros - good god no - using a router with NAT you'll be fine - out of interest what model router is it? You might want to add a software firewall to the computers so that you can keep some control over out bound connections but I'll leave that to you.
SirDice - LOL :) np mate
Z
my set up is:
internet > router(with nat) > LAN (consisting of several computers)
BUT win xp claims (at this warning that i am refering to )that having a gateway is a better solution.
swiseguy:
if your win2k box is formatted in NTFS the win98 box will not be able to see the files on it but the 2k can see the 98.
Teo, shouldn't you start your own thread instead of taking over someone elses?
i got my win. 98SE computer to see the win. 2k computer but when i try to go into the win. 2k computer from the 98 it asks for a password and i dont remember ever making one. Do you know where you can find it? and my win. 2k computer can even see the 98 computer. Any ideas??
maybe its different on 2K (don't see why but).... since when was this the case Tedob? I've got XP at home formatted as NTFS and the win98 box in the LAN can quite happily see files on the XP box - ok they are going through a router .... but surely in a network and in terms of file sharing NTFS should not make much difference should it (I realise that it would be more secure than FAT32 etc)? If it's different for 2k would you be able to say why?? All the boxes at work are either 2k or XP so I only have the home setup to go on in this scenario.Quote:
if your win2k box is formatted in NTFS the win98 box will not be able to see the files on it but the 2k can see the 98.
Cheers
Z
well i tried everything that you guys mentioned. but my windows 2k box is running a fat32 file system. And it can still not see my 98se computer. But the 98 can still see the 2k but it asks for a password that i never put in.
Have you got the same administrator userid & password on both systems and are you logged on under that ID. I did have a similar problem, however when I created the same userid & password on both systems, poof :p .
Cheers:
i am not to good with networking (this is my first attempt) and im not quite sure how to set the administrator user id & password. How do i do that?
I was afraid you were going to ask this. First what userid do you use to logon to your win2k box. It is likely already the administrator. You can check by going to your control panel and clicking on "Users & Passwords". Now the 98 box....as I recall (and it's been awhile ;) ), when it boots up you should be presented with a dialog box asking for a userid and a password. Now if you haven't set anything up, you likely just hit enter and it continues to boot. If you want to create a userid & password just enter the userid & password in the dialog box, the system, I believe, will then say this user does not exist, do you want to create it. Answer yes. I believe in 98 all users have admin rights (but somebody with more experience with 98 may be able to fill you in about that).
Now, again I haven't done this in a long time so follow my advise with caution. :p
Good Luck
Cheers:
Thank you so much for helping me out. the problem wasnt really anything that you guys told me to try. on my 98 computer the file and print sharing wasnt enabled. I feel stupid for not checking that but i thought that it was. anyways i finally got it working. Thanks again!