Printable View
Has anyone seen anything like this? It has happen on two seprate computers this week.
Win. 2000, on a 20Gb harddrive, ran SpyBot and Adware, removed a lot. Rebooted the computer, boots up with no operating system boot to a floppy, fdisk finds a 2Gb harddrive with a 19061Mb partition.
Fdisk is not a very good partition utilities.. Can you report info that Partition Magic give you?
How much space does it show that you have in DOS? (I believe the limit on DOS was 40GB)
It could perhaps be a messed up master boot record.
perhaps you have a non-standard hd that needs a driver. when you have removed the driver, windows stop recognizes hdd
or you are using those kind of driver that run "bellow" the o/s, that forces windows do use 16 bit drivers... remember those?
Patition Magic reports the same size and error 110.
Check the jumpers on the mobo and make sure the IDE cable is all the way plugged in.
First thing I tried with the missing OS was the /mbr
Computers are not that old "Dell Optiplex GX150"
You would think the Tandy Co. is behind this... just two weeks out of warranty!
Already reset the IDE cable, these cables have a history of going bad.
Has anyone heard of a virus or a sypware issue causing this problem
Maybe the hard drive is just faulty, i've had problems in the past were the hard drive was working fine, then i go to turn it on a few days latter and nothing...
Checked everything imaginable then got pissed so took it into the shop and it turned out the hard drive was just faulty...
have you tried using a different hard drive in the computer? Try that and see if it happens still..
cheers
front2back:.
Hmmm.....have you tried to delete the partions and then reboot them.
http://www.computing.net/linux/wwwbo...rum/25878.html
Found this, it relates to an install fault, but the Partition Magic code is the same...........
Quote:
I?t s abug in the qtparted version together with the 2.6 kernel.
I had thesame problem. You probably used the install disk to partition your drive.
Try these options:
- in your bios change the mode for your harddrive to lba.
Some people were able to log in this way. If you install using this mode you shouldn?t get a problem. This didn?t work for me.
- when booting into XP works use a program like partition magic to correct the incorrect partition info on the drive.
FIXMBR WILL NOT WORK UNLESS YOU REMOVE ALL PARTITIONS!!!!
This is a nasy bug....