Problem with simple two machine network

I'm simply trying to connect two machines via cross over ethernet. I can ping both of the machines from the respective sides and vice versa, but when I try and go into network neighborhood it gives me an error of "access denied" even when I'm clearly running under the admin account. I've tried opening shares on both machines to try the data swap but to no avail. One side pops up with an access denied message and the other can't even recognize any other machines on the same workgroup. Both of the machines are windows xp pro. Any help would be greatly appreciated!

Someone correct me if I am wrong...

I believe that by default, XP attempts to authenticate to other XP bexes with the username and password you are currently logged in under. So if the password is different on each box, you will get an access denied error. It would also happen if the machines are not properly set to ask for a password and/or user credentials. Unfortunately, I am unsure of how to set this properly.

When you attempt to open a network share, are you asked for a password, and if so, what username and password do you give it?

Make sure that you have the windows firewall turned off, and if you have symantec uninstall it, and you will notice a big diffrence... if you have macafee turn it off

I authenticated with my regular admin account to another box fine. The one I'm having problems with, I have no idea as to what the problem could be. Turned off norton, firewalls, etc. Still getting access denied errors, but clearly we are both running under admin accounts.

To tired to say much so hopefully this link might help you somehow..

http://support.microsoft.com/default...b;en-us;306126





front2back

Have you ran the windows setup a network wizard? Its the quickest way to do it.
Make sure that you have spelt the workgroup correctly for both machines.

Open My Computer then goto tools and select "Map Network Drive" fill in the relevent details, if you need to log in with a different user name just click "Connect using a different user name"

Dont turn your firewall off or uninstall it as someone has suggested. What would be the point of having a firewall if you need to uninstall it to network two boxs together???(That post must be in my top 5 of all time stupid posts)

Configure it, dont get rid of it!

Quote:

---

Dont turn your firewall off or uninstall it as someone has suggested. What would be the point of having a firewall if you need to uninstall it to network two boxs together???(That post must be in my top 5 of all time stupid posts)

Configure it, dont get rid of it!

---

This is good advce.

A trick you can try...create a new user with the same username and password on both machines.

Give this user admin rights on both machines.

Have some thing shared..and try connecting.

Also ...check your workgroup settings as suggested by Nokia and you IP setup.

Quote:

---

You must spread your AntiPoints around before giving it to Nokia again.

---

;)

MLF

Have you tried creating a vpn? also, you could just make a connection through serial ports, and if u are using one of them as a gateway machine, make sure u run the network setup wizard. Since they are also both running pro, enable remote access, and connect to one of them and see if you can gain control of one of the machines.

Lissen to your senior members they have the right answers. add user name with the same name and password and dont leave the password blank. Make sure you are in the same work group. Network setup wizard will work google it if you dont know how to make a network disk. In a rare case these things dont work reload XP. Good Luck

wow ghost, u sure are ignorant, i may be young and a "newbie", but that certainly does not have anything to do with my input on what i thought may have been the correct solution. but hey, opinions are like *******s, we all have one.

Matt

dont see n00b in ghosts reference...

Quote:

---

Lissen to your senior members they have the right answers

---

But I do see Senior members.

Not sure what your point is???

MLF

Quote:

---

Originally posted here by Ghost_25inf
Lissen to your senior members they have the right answers

---

that is what im talking about, just cuz i have next to zero posts, does not mean i don't know what im talking about.

Quote:

---

Originally posted here by mattgilberg

that is what im talking about, just cuz i have next to zero posts, does not mean i don't know what im talking about.

---

You are right there as your title says AntiOnline Newbie - it means exactly what it says, a newbie to AntiOnline amd does not imply that you dont know what you are talking about.

However, your post that stated "Have you tried creating a vpn? " Does imply you dont know what you are talking about, also "Since they are also both running pro, enable remote access, and connect to one of them and see if you can gain control of one of the machines." again imply's you dont know what you are talking about.

No one was refering to your AO status when they posted anything, they mearly (in a pretty nice worded way) said to ignore your post as there are far better ways to help the person with the problem.

I'm not saying your ways are wrong, there are many ways to solve a problem like this, just that the ways you suggested, especially the VPN way is, well, it is just not the way to go about what he was trying to do.

Dont take things too seriously and get over the AO newbie thing my friend, its only a web site at the end of the day!


/and im very drunk at moment and typed this real slow to make sure it is readab;le, but of it isnt, i am aplogsie! i will edit it in the morning!!

Well Mattgilberg tell me what you will gain from connecting RDP? Anyone can run RDP but that wont help with the rights issue that is going on here. Your profile says your a student, well I allready have my degree and im certified in Net+. VPN wont help this situation either. Serial will only be good if you are near each other. So if vynkz has his computers in two different room you want him to purchase oh maybe 100 foot serial cable and run that to his other computer? vynkz Look up users rights and permissions and you will get the information you need to solve this issue.