So here I am, once again, with a problem. The sound on my computer is messed up. When I try to watch a DVD, some of the sounds are normal, but some (like some conversation) is really quiet. Why is this?
Printable View
So here I am, once again, with a problem. The sound on my computer is messed up. When I try to watch a DVD, some of the sounds are normal, but some (like some conversation) is really quiet. Why is this?
What sound card have you got?
What speaker setup?
What does it do with a regular music CD?
What player are you using?
Is the DVD a regular original recording (store bought)?
:)
Hmm.
SoundMAX Integrated Digital Audio
Creative 5.1 surround (even though I've never been able to get surround sound to work)
It plays all music (CDs, mp3s, etc.) fine. No problems.
I've tried a number of players, from the ones that DVDs come bundled with (InterActual, PCFriendly), to WM, Core Media player, just about anything I can get my hands on.
Lastly, yes, it is store bought (although any sort of DVD rip has the same problems). And it's not just one DVD, it's ALL DVDs.
Can you try it with two PC speakers?
When you say it plays CDs OK is this in the DVD drive?
:)
No difference with two speakers.
Yes, in the DVD drive.
You might try cleaning the drive, but it sounds like the drive may be slightly out in its scanning. Can you borrow a different one or try it in another computer?
:)
But it also happens with DVD rips. Do I maybe need a new sound card?
Hmmm, is it a chipset on the motherboard, or a separate card?
See if you can borrow a card, a PCI or something will do and try that.
If you have a chipset on the mobo remember to switch it off in the BIOS.
Also check your sound and media settings to see what devices are selected, and check for the latest drivers for your sound card/chipset
:)
I'm not sure where I would go to update my soundcard. I believe it's a chipset .
What is the make and model of your computer, or if it is a custom build the make and model of the motherboard.
:)
Intel 8201, maybe?
Hi,
Please get this tool. It is a limited trial but it should give you details of your motherboard and chipset:
http://www.lavalys.com/products/down...?pid=3&lang=en
You seem to be using AC97. Unfortunately that uses a variety of codecs so we need more specific hardware information.
In the meantime, if you can borrow an old PCI audio card and try that, it should confirm if it is your onboard audio that is the problem.
What operating system are you using BTW?
:)
Ok, I downloaded the program. What do you need to know? This is what's listed under audio adapter:
Analog Devices AD1980 @Intel 82801DB ICH4 - AC'97 Audio Controller [B-0]
I'm using XP Pro
Hah! we are getting there :D
What is the make and model of the MoBo?
:)
The name of the mobo is Intel Blue Mountain 2 D845PEBT2, and the chipset is Intel Brookdale i845PE.
Please check that you are set up like this:
http://www.intel.com/support/motherb.../cs-010632.htm
You need to use the rear line out connector.
As that is a fairly old board, I don't suppose there are any upgrades to the firmware.
So, I suspect that the 5.1 (6channel) and PC (2channel) setup may be the issue. When you use multichannel speaker systems, they give you stereophonic sound, but they also produce a kind of three dimensional effect (surround sound).
My guess is that the main channels used for voice/dialogue are not functioning properly. Now, you will get some "background" sound out of the subwoofer and other speakers, as this enhances the 3-D effect, but the two speakers that should give you the volume are not doing their job.
The fact that you mentioned that you had never had surround sound working properly confirms this perhaps?
My thinking is that you should start by making sure that your speaker array is wired up correctly. The try moving them as far apart as you can and playing:
1. A music CD
2. A video CD
3. A music DVD
4. A video DVD
Please note which speakers are giving out sound, and at what volume.
If there is a software application to control your sound, please look at the settings in it, particularly if it has an "advanced" mode/menu
Then take a look in: <start>, <settings>, <control panel>, <sounds & multimedia> or whatever that is called in XP (I am on a Win 2000 box right now)
Click on the "Audio" tab at the top and let me know what you are trying to use for audio playback and Midi. I have Avance AC 97 Audio and Microsoft GS Wavetable SW Synth, but this only has two PC speakers. Please look at the alternative options for those two, and let me know what they are.
Finally, from the Control Panel, go into <hardware > and <device manager> and check your audio components to see that they are all reported as functioning properly.
:)