-
January 6th, 2002, 12:42 PM
#1
Junior Member
linux settup question
Hello everyone
I am setting up linux mandrake 8.1 most is working fine but my soundcard is not detected. I have a PCI-soundblaster 128 and also a inbuildt card on the motherboard its a dell not sure of exact version.
Linux is not detecting any soundcard.
I am completly new to linux and would like to some info on links or tips on how to correct this and future screwups by my
self.
Thanks
-
January 6th, 2002, 04:32 PM
#2
Junior Member
OK, heres acouple things you can try:
If you want to use your onboard sound system:
First you need to go into BIOS and enable it,
most boards are disabled by default.
take note of the address settings or refer to the
manual for your mother board.
Or you can just use your SB128
Boot back into linux and as root:
~->#soundconfig
this will bring up a nifty little hardware configuration
tool.
In most case (according to Mandrake Docs) your
soundcard should be detected.
Some cards need some parameters as
I/O, IRQ, BMA, DMA 16/2, MPU401 I/O.
You just select them by clicking on the combo boxes.
If it didn't auto detect your SB, check in the manual
for your card or visit their web-site.
Once you got the values set, Click on TEST.
If its all good, click on OK
there ya go, hope that helps you out
--
\"UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity.\"
Dennis Ritchie.
-
January 7th, 2002, 03:22 AM
#3
Senior Member
links is helpful!
http://www.linuxdoc.org
i guess howto's will help you!
\"The more you ignore me... the closer i get!\"
-
January 7th, 2002, 03:52 AM
#4
Member
protocool its the 3th time that i see you indicating this page don't u know any other?
arv- look in any search engine Setting up Linux mandrake 8.1 u will find any answer to your questions
linux installing tutorials its one thing that will always have on the net
Nobody Born The Best
But Some Born To Be The Bests...
-
January 7th, 2002, 09:46 AM
#5
Senior Member
for Code-X:
well, im not starting flames for nothing. however, if you follow my page you'll get bunch of documentation. just for nothing, try this...
http://www.aalmata.cjb.net
and don't forget to click links it is under 80% operational but since then almost everybody here is using my links. so why don't you try and see for your self. btw, i am focusing through the http://www. linuxdoc.org because of the complete documentation and the man pages, faqs, everything being written in linux.
but still, i was offended by what you point out. but since, it is okay at least i have tried to defend myself. no flames. and whatsoever.
\"The more you ignore me... the closer i get!\"
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|