-
March 6th, 2004, 04:18 PM
#1
Junior Member
HD problem!:S
i have a western digital 3 gigs hD as a slave
i use it as a back up for my programs and some of my data
now whenever i attach it
with a seagate master HD
and i try to access any of my drives on the WS
it says drive need to be formatted yes or no:S
although it were working b4
how can i get over this?
-
March 6th, 2004, 06:06 PM
#2
Member
Whats your OS and what type of formatting did you choose for both drives?
Signature image is too tall!
-
March 6th, 2004, 06:42 PM
#3
Junior Member
the seaget( Master Drive) is NTFS
the western is FAT
My OS is winxp pro
-
March 6th, 2004, 08:23 PM
#4
Member
Some formats have a max size..for instance, FAT's max size might be 2 or 3 gigs..I don't remember, can anyone clarify this?
But anyways..Since your on XP Pro, you have the ability to view the other drive...so thats not the problem.
Have you tried going into the add new hardware wizard and going that route?
Check your jumper settings too, cable select can be a bit trivial at times i've noticed..
Are you running them off of the same IDE cable or seperate IDE's?
Also, what model are both of the HD's and what size is the western digital?
Does that WD HD actually have any data on it?
And do you have an OS on your 3 gig?
I would highly suggest you convert your FAT drive to NTFS if you have that ability..but thats just me.. This "might" solve your problem as well..but I don't see it being that way.
Signature image is too tall!
-
March 6th, 2004, 10:42 PM
#5
Junior Member
i tried all of this but nothing worked
except coverting my NTFS to FAT
i tried all the others it gives me the same error:S
-
March 7th, 2004, 06:37 AM
#6
Member
And your sure you don't have a bad HD?
Signature image is too tall!
-
March 7th, 2004, 07:19 AM
#7
Heh i had the same problem with a WD 40 and WD 80 (slave) drivers...ok bro here is what you gotta do...
1. download my attachment
2. format a floppy and put the files into the floppy
3. i assume you have some partitions on your master drive if not create one larger than your slave drive (3GB)
4. next restart your computer with the boot disk in the floppy drive
5. go onto tools or something (i think its the 4th option) and select copying partitions
6. then select your slave drive in field 1 and the partition on your master drive you want it to copy to
7. wait a bit for the proccess and then exit the boot programm and it will automaticly restart
8. the files should be in the master partition and now you can format your slave drive and put the files back
Please let us know if it has worked or not worked, if not I'll be glad to help ya more
edit: the file is too big to be attached in a post...i think it is this on this website of WD...download the data lifeguard v11.0 for DOS in a .exe format and run it, it will guide you in creating the boot disk...after that just follow my steps from step 3
-
March 7th, 2004, 01:10 PM
#8
Junior Member
@ script kiddie
i followed ur way but nothing happened
it just formatted the destination drive:S
i think im gonna format and let whatever happen
-
March 7th, 2004, 09:34 PM
#9
you were not supposed to format it...there is a option to copy a partition not to delete a partition...
-
March 7th, 2004, 11:02 PM
#10
Junior Member
i didnt choose to format
i choosed from utilities to copy a partition
then i choosed the source and destination partitions
and it formatted the destination partition:S
i didnt choose to format((
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
|